Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This complete Bowden V6 extruder kit includes a 0.2 mm nozzle, heatsink, heatbreak, heater block, thermistor, and 12 V fan with cable. Its fine nozzle and PTFE-lined design make it well suited to detailed prints and flexible filaments.

Key Highlights

  • Complete kit with heatsink, heatbreak, nozzle, heater block, thermistor, and fan
  • 0.2 mm brass nozzle for fine detail and smooth surface finish
  • PTFE liner supports flexible filament guidance
  • 30 cm fan cable for flexible routing
  • 12 V 30 x 30 x 10 mm cooling fan included
  • Lightweight at 74 g for minimal print head load

Ideal For

  • 3D printing hobbyists upgrading a Bowden-style printer
  • Makers printing detailed miniatures and small models
  • Users working with flexible filaments like TPU
  • DIY enthusiasts building a custom hotend setup
  • Operators printing high-temperature materials such as nylon or polycarbonate

Buying Tip

Check that your printer’s fan supply is 12 V and that your firmware supports a 100K Semitec NTC thermistor before installing this kit.

Elecvora expert review

Our verdict

A well-rounded kit for anyone wanting a fine-detail hotend with flexible filament capability. The unassembled format is a plus for learning, but it demands some patience and basic tools.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Includes all major hotend components in one package
  • 0.2 mm nozzle enables high-detail printing
  • PTFE liner helps with flexible filaments
  • Lightweight design reduces print head inertia

Cons

  • Requires assembly and basic hotend experience
  • Fan is 12 V only, so check your printer’s output
  • No mounting hardware included

Best for

Detailed printing and flexible filament projects on Bowden-style printers

Not ideal for

Absolute beginners who want a pre-assembled drop-in unit

Specifications

Item TypeExtruder
Supported Nozzle Diameter (mm)0.2
Filament Diameter1.75
Assembled (Y/N)No
Cable Length0.003
Length (mm)75
Width (mm)28
Weight (g)74
Shipping Weight0.08 kg
Shipping Dimensions15 × 5 × 5 cm

What's in the box

  • 1 x Aluminium heatsink with embedded fitting for 1.75 mm tubing
  • 1 x Stainless steel heatbreak
  • 1 x Brass nozzle (0.2 mm)
  • 1 x Aluminium heater block
  • 1 x 100K Semitec NTC thermistor
  • 1 x 12 V 30 x 30 x 10 mm cooling fan with 30 cm cable

Frequently Asked Questions

What filament diameter does this kit support?
It is designed for 1.75 mm filament, which is a common size for desktop 3D printers.
Is the hotend pre-assembled?
No, the kit arrives unassembled. You will need to put the parts together before installation.
What voltage is the cooling fan?
The included 30 x 30 x 10 mm fan is rated for 12 V. Make sure your printer provides a 12 V supply for the fan.
Can I print flexible filaments with this hotend?
Yes, the PTFE liner inside the hotend helps guide flexible filaments, making it suitable for materials like TPU when printed at appropriate speeds.
What thermistor is included?
The kit includes a 100K Semitec NTC thermistor, which is compatible with many common firmware configurations.
What is included in the package?
You get an aluminium heatsink, stainless steel heatbreak, 0.2 mm brass nozzle, aluminium heater block, 100K Semitec NTC thermistor, and a 12 V 30 x 30 x 10 mm cooling fan with 30 cm cable.

Overview

The Generic All Complete Bowden V6 Extruder Kit bundles the essential parts for building a Bowden-style hotend. It is aimed at 3D printing enthusiasts who want a compact, high-temperature-capable extruder for detailed work. The kit arrives unassembled, giving you the chance to inspect and understand each component before fitting it to your printer. Because the design uses a PTFE liner that can extend into the extruder, it helps confine flexible filaments for more consistent feeding. The 0.2 mm nozzle is the standout specification, making this kit a strong candidate for small, intricate models where fine layer detail matters.

Key Features

  • Complete component set: Includes aluminium heatsink, stainless steel heatbreak, brass nozzle, aluminium heater block, thermistor, and cooling fan.
  • Fine 0.2 mm nozzle: Produces small extrusion widths for detailed surfaces and miniature parts.
  • PTFE-lined hotend: The liner guides filament and supports flexible materials without being exposed to the highest temperatures.
  • 30 cm fan cable: Gives you extra length for routing the cooling fan to your control board.
  • Lightweight assembly: At 74 g, the kit adds little mass to the print head.

Specifications Explained

Nozzle diameter (0.2 mm): A smaller nozzle opening lays down finer lines, which is ideal for high-detail prints but may require slower print speeds and careful slicing settings. Filament diameter (1.75 mm): This is the common filament size used by many desktop 3D printers, so the kit fits standard 1.75 mm material. Assembled (No): You will need to assemble the hotend, which allows you to check each part and learn how it fits together. Cable length: The 30 cm fan cable gives reasonable reach for most printer frames. Dimensions and weight: The hotend measures approximately 75 mm in length and 28 mm in width, and the kit weighs 74 g, keeping the moving mass low.

Compatibility and Requirements

This kit is designed for 1.75 mm filament and a 0.2 mm nozzle. It uses a 12 V cooling fan, so your printer’s fan output should be 12 V. The thermistor is a 100K Semitec NTC type, which is widely supported by common firmware configurations. Because the kit is unassembled, you will need basic tools and some experience with 3D printer hotend assembly. No mounting hardware or additional wires are listed beyond the fan cable.

Typical Uses

Use this kit for printing detailed miniatures, small mechanical parts, and models where surface finish is important. The PTFE liner makes it a practical option for flexible filaments such as TPU when printed at appropriate speeds. It is also suitable for high-temperature materials like polycarbonate and nylon, provided your printer and firmware support the required temperatures. The compact size and low weight suit Bowden-style setups where reduced moving mass is beneficial.

What's in the Box

  • 1 x Aluminium heatsink with embedded fitting for 1.75 mm tubing
  • 1 x Stainless steel heatbreak
  • 1 x Brass nozzle (0.2 mm)
  • 1 x Aluminium heater block
  • 1 x 100K Semitec NTC thermistor
  • 1 x 12 V 30 x 30 x 10 mm cooling fan with 30 cm cable

Quick specs

Item Type
Extruder
Supported Nozzle Diameter (mm)
0.2
Filament Diameter
1.75
Assembled (Y/N)
No
Cable Length
0.003
Length (mm)
75
See all specifications