
1 / 3 · Click to enlarge
AI Summary
A single Amass MT60 male connector with three 3.5 mm gold flash contacts in a toughened polyamide body. It gives brushless motor and ESC wiring a compact, secure three-pole link in multirotor and EDF builds.
Key Highlights
- Three-pole male MT60 connector for motor and ESC wiring
- 3.5 mm contacts with gold flash plating
- Toughened polyamide housing for a hard, compact body
- Improved locking on the insulating caps
- Suits multirotor and EDF power connections
- Lightweight at just 0.02 kg shipping weight
Ideal For
- Multirotor builders wiring brushless motors to ESCs
- EDF hobbyists needing a compact three-pole power link
- FPV pilots replacing a worn male MT60 plug
- RC modelers building removable motor harnesses
Buying Tip
Remember this is the male half only, so order a matching female MT60 connector if you do not already have one.
Elecvora expert review
Our verdict
A tidy, well-made three-pole connector that keeps brushless motor wiring compact and secure. The polyamide body and gold flash contacts make it a sensible choice for multirotor and EDF builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact three-pole format for motor wiring
- Toughened polyamide body holds its shape
- Gold flash plating on 3.5 mm contacts
- Improved locking on the insulating caps
- Very light at 0.02 kg shipping weight
Cons
- Male half only, female connector sold separately
- Soldering required to attach leads
- No voltage or current rating stated in the product data
Best for
Multirotor and EDF builders who want a compact three-pole motor connector
Not ideal for
Plug-and-play setups that cannot be soldered
Specifications
| Item Type | Battery Connector |
|---|---|
| Model Series | MT60 |
| Gender | Male |
| Diameter (mm) | 3.5 |
| Material | Gold flash and Polyamide |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 7 × 4 × 1 cm |
What's in the box
- 1 x MT60 3 Pin Male Connector
Frequently Asked Questions
Is this a male or female connector?
How many connectors are included?
Do I need to solder it?
What size are the contacts?
What is it used for?
How should I care for it?
Overview
The Amass MT60 3 Pin Male Connector is a three-pole connector designed for power applications in electric aircraft and multirotor builds. Each connector carries three 3.5 mm bullets inside a compact polyamide body, giving you a neat way to join the three motor wires to an ESC. The male housing is intended to mate with the matching MT60 female connector, so the pair forms a secure, repeatable connection point.
The body is made from toughened plastic, which helps the connector hold its shape and keep a firm fit. Gold flash plating on the contacts supports a clean electrical path, while improved locking on the insulating caps helps the plug stay in place once seated. This listing is for one male connector only.
Key Features
- Three-pole design: one connector handles all three motor phases for a tidy wiring run.
- 3.5 mm contacts: gold flash plating on the bullets for a smooth mating surface.
- Polyamide housing: a hard, compact body that protects the contacts and holds the fit.
- Improved cap locking: the insulating caps are designed to stay put once connected.
- Compact footprint: small enough for tight frames and dense multirotor builds.
- Lightweight: shipping weight is just 0.02 kg, so it adds little to your build.
Specifications Explained
Model series MT60 identifies the connector family and tells you it is a three-pin part, which is the format used for three-phase brushless motor wiring. Male gender means this is the side with the protruding contacts; you will need the matching female MT60 connector to complete a pair.
3.5 mm diameter refers to the bullet contacts inside the housing. That size is common in multirotor and EDF power runs, so the connector fits neatly into compact builds. Gold flash and polyamide describes the two main materials: a plated contact surface and a tough plastic shell. Together they give a connector that is rigid, light and easy to handle during assembly.
Compatibility and Requirements
This is a male MT60 connector, so it must be paired with a compatible female MT60 connector to make a connection. It is intended for brushless motor and ESC wiring in multirotor and EDF applications. Soldering is required to attach motor or ESC leads to the contacts. No voltage or current rating is stated in the product data, so check your build requirements against the connector before use.
Typical Uses
- Connecting brushless motor leads to an ESC in multirotor builds
- EDF power wiring where a compact three-pole joint is needed
- Replacing a worn or damaged male MT60 connector
- Building a removable motor harness for maintenance
What's in the Box
1 x MT60 3 Pin Male Connector.

Quick specs
- Item Type
- Battery Connector
- Model Series
- MT60
- Gender
- Male
- Diameter (mm)
- 3.5
- Material
- Gold flash and Polyamide
- Shipping Weight
- 0.02 kg



















