Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Amass XT60 male and female connector pair with gold-plated brass terminals and high-temperature nylon housings. It provides a secure, low-resistance 35A connection for drone and RC power systems.

Key Highlights

  • Gold-plated brass terminals for low resistance
  • 35A continuous current rating with 12AWG wire
  • Secure friction lock resists vibration
  • High-temperature nylon housing with UL94-V0 rating
  • Up to 100 mating cycles for repeated use
  • Compact 20 x 15 x 7 mm per connector

Ideal For

  • RC hobbyists building or repairing battery harnesses
  • Drone builders needing a compact 35A power connector
  • FPV pilots replacing worn XT60 connectors
  • DIY electric vehicle and robotics projects
  • Anyone soldering custom power leads with 12AWG wire

Buying Tip

Check that your existing connectors are genuine XT60 and that your wire gauge is 12AWG or smaller for the full 35A rating.

Elecvora expert review

Our verdict

A dependable, genuine Amass XT60 pair that delivers the expected 35A performance and secure fit for RC and drone power systems. The gold-plated terminals and flame-retardant housing make it a solid choice for both beginners and experienced builders.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine Amass quality with gold-plated brass terminals
  • Rated for 35A continuous with 12AWG wire
  • Secure friction lock reduces accidental disconnection
  • UL94-V0 flame-retardant housing
  • Compact and lightweight at about 3g each

Cons

  • Requires soldering to attach wires
  • Not waterproof (IP40 rating)
  • Limited to 100 mating cycles

Best for

RC and drone builders needing a reliable 35A power connector

Not ideal for

High-voltage or waterproof applications

Specifications

Shipping Weight0.005 kg
Shipping Dimensions4 × 4 × 2 cm

What's in the box

  • 1 x Amass XT60 female connector (XT60-F.G.Y)
  • 1 x Amass XT60 male connector (XT60-M.G.Y)

Frequently Asked Questions

What is included in this package?
The package contains one male XT60 connector (XT60-M.G.Y) and one female XT60 connector (XT60-F.G.Y).
What wire gauge should I use with these connectors?
12AWG wire is recommended to achieve the full 35A continuous rating. Thinner wire may reduce current capacity.
Can these connectors handle 6S LiPo batteries?
Yes, the 500V DC maximum voltage rating is well above the voltage of typical 6S LiPo packs, so they are suitable for such setups.
Are these genuine Amass connectors?
Yes, they are genuine Amass XT60 connectors with the model designations XT60-F.G.Y and XT60-M.G.Y.
How do I solder wires to these connectors?
Strip and tin your wire, tin the connector terminal, then solder the wire to the terminal and insulate with heat-shrink tubing.
Are these connectors waterproof?
No, they have an IP40 rating, which means they are protected against solid objects over 1mm but not against water.

Overview

The Amass XT60 Gold Plated Bullet Battery Connector Pair (XT60-F.G.Y and XT60-M.G.Y) is a male-female connector set designed for high-current power links in RC models, drones, battery packs and electric vehicles. Each connector uses gold-plated brass terminals set into a high-temperature nylon housing, combining reliable conductivity with a secure friction-lock fit. The pair is rated for up to 35A continuous when used with 12AWG wire, making it a practical choice for builders who need a compact, solder-friendly power connector.

Key Features

  • Gold-plated brass contacts for stable conductivity and low resistance.
  • 35A continuous rating with 12AWG wire (temperature rise under 85°C).
  • Friction-lock design keeps the connection secure under vibration.
  • High-temperature nylon housing with UL94-V0 flame rating.
  • 500V DC maximum voltage for a wide range of low-voltage power systems.
  • Up to 100 mating cycles for repeated connect and disconnect.

Specifications Explained

The 35A continuous rating tells you how much current the connector can carry in typical use with 12AWG wire before exceeding an 85°C temperature rise. The 500V DC maximum voltage is well above what most RC and drone battery packs require, giving headroom for various setups. Gold plating on the brass terminals helps maintain a clean contact surface and reduces resistance compared with bare metals. The nylon housing is rated UL94-V0 for flame retardance and handles operating temperatures from -20°C to 120°C. With IP40 protection, the connector is touch-safe against solid objects but not sealed against water, so keep it dry. Each connector measures approximately 20 x 15 x 7 mm and weighs about 3g.

Compatibility and Requirements

This pair is compatible with 12AWG wire, which is recommended for achieving the full 35A rating. The connectors are cable-solder type, so you will need a soldering iron and basic soldering supplies to attach them to your wiring. They mate only with genuine XT60 connectors of the opposite gender. No mounting hardware is required; the connector is inline and held by the soldered wire joint and heat-shrink if used.

Typical Uses

Use this XT60 pair to connect battery packs to ESCs in RC cars, boats and aircraft, to build custom power harnesses for drones, or to replace worn connectors on existing models. It is also suitable for light electric vehicle projects and other low-voltage DC power systems that need a compact, high-current connector.

What's in the Box

  • 1 x Amass XT60 female connector (XT60-F.G.Y)
  • 1 x Amass XT60 male connector (XT60-M.G.Y)

Quick specs

Shipping Weight
0.005 kg
Shipping Dimensions
4 × 4 × 2 cm
See all specifications