
1 / 4 · Click to enlarge
AI Summary
A complete 12MP IMX477 PTZ camera kit for Raspberry Pi and Jetson Nano with motorized pan, tilt and zoom plus IR-Cut switching. One camera can remotely cover wide areas and zoom into details for day and night projects.
Key Highlights
- 12MP IMX477 sensor with 1.55µm pixels for detailed images
- Motorized pan, tilt and zoom control via PTZ controller board
- IR-Cut switchable filter for day and night imaging
- 4.38-10.71mm lens with 96°-33° horizontal field of view
- 1080p60 and 4032x3040 at 30fps video modes
- MIPI interface with ribbon cables for Pi and Jetson Nano
Ideal For
- Raspberry Pi and Jetson Nano users building remote monitoring systems
- Security camera projects needing day and night vision
- Wildlife photographers wanting remote zoom control
- Machine vision developers requiring adjustable framing
- Makers replacing multiple fixed cameras with one PTZ unit
Buying Tip
Check that your Raspberry Pi or Jetson Nano setup includes the correct ribbon cable and that you have a stable power supply for the PTZ motors before installing.
Elecvora expert review
Our verdict
The Arducam 12MP IMX477 PTZ camera offers a practical way to add remote pan, tilt and zoom to Raspberry Pi and Jetson Nano projects. Its IR-Cut switching and wide zoom range make it versatile for day and night monitoring, though it requires careful setup and a stable power source.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High-resolution 12MP IMX477 sensor with good low-light performance
- Motorized pan, tilt and zoom reduce the need for multiple cameras
- IR-Cut switchable filter supports day and night use
- Includes necessary cables and standoffs for installation
Cons
- Requires a compatible host board and power supply, not included
- Setup involves both hardware wiring and software configuration
- Rolling shutter may show motion artifacts in fast-moving scenes
Best for
Raspberry Pi and Jetson Nano users needing flexible remote monitoring
Not ideal for
Plug-and-play users wanting a standalone camera without configuration
Specifications
| Item Type | Camera Module |
|---|---|
| Resolution | 12MP |
| Sensor | IMX477 |
| Pixel Size (um) | 1.55 µm x 1.55 µm |
| Optical Size | 1/2.3″ |
| Video Modes on Raspberry Pi | 1080p30, 720p60 and 640 × 480p60/90 |
| Frame Rate | 1920×1080 @ 60fps,4032×3040 @ 30fps |
| IR Sensitivity | Optional with additional Motorized IR-Cut filter |
| Angle (FOV) | 96° – 33° (Horizontal) |
| Interface | MIPI |
| Focal Length (mm) | 4.38-10.71mm±5% |
| Shipping Weight | 0.088 kg |
| Shipping Dimensions | 10 × 8 × 4 cm |
What's in the box
- 1 x Arducam PTZ Lens, assembled with 12MP IR-Cut switchable camera board and camera control board
- 1 x 15-Pin to 22-Pin Ribbon Cable (30 cm)
- 1 x 22-Pin Ribbon Cable (30 cm)
- 1 x XH2.54 Jumper Wire with 6-Pin Female Connector (30 cm)
- 4 x Plastic Standoffs for the Base
Frequently Asked Questions
Which boards is this camera compatible with?
Does the camera support night vision?
What is included in the package?
Can I control pan, tilt and zoom remotely?
What power does the PTZ mechanism require?
What video resolutions are supported?
Overview
The Arducam 12MP IMX477 PTZ camera brings remote directional and zoom control to Raspberry Pi 4, 3B+, 3 and Jetson Nano projects. Instead of deploying several fixed cameras, you can move and zoom a single unit to monitor different areas, saving cost and installation time. The kit is assembled around a 12MP IMX477 sensor and a motorized 4.38-10.71mm lens with an IR-Cut switchable filter, so it performs in both daylight and low-light conditions.
Key Features
- 12MP IMX477 sensor: 1/2.3-inch optical size and 1.55µm pixel size for clear, detailed captures.
- Pan, tilt and zoom: The PTZ controller board enables remote movement of the camera and lens.
- IR-Cut switchable: Optional motorized IR-Cut filter supports day and night vision setups.
- Flexible framing: 96°-33° horizontal field of view lets you switch between wide scenes and close-ups.
- High frame rates: 1920x1080 at 60fps and full 4032x3040 at 30fps.
- MIPI interface: Includes 15-pin to 22-pin and 22-pin ribbon cables for supported boards.
Specifications Explained
The 12MP resolution and 1/2.3-inch sensor give you enough detail for identification and inspection tasks. The 4.38-10.71mm focal length range, combined with the 96°-33° horizontal angle, means you can capture a broad view and then zoom in without repositioning the camera. Video modes include 1080p30, 720p60 and 640x480p60/90 on Raspberry Pi, while the sensor supports 1920x1080 at 60fps and 4032x3040 at 30fps. The rolling shutter is suitable for general monitoring and machine vision. The IR-Cut filter is motorized and switchable, allowing the camera to be used in day and night security systems.
Compatibility and Requirements
This camera is designed for Raspberry Pi 4, 3B+ and 3, as well as Jetson Nano and Xavier NX. It uses a MIPI interface and ships with the necessary ribbon cables and a 6-pin jumper wire for the PTZ controller board. Hardware and software setup tutorials are available for Raspberry Pi and Jetson Nano; follow the platform-specific guide to configure the camera and motor control. A compatible host board and power source are required but not included.
Typical Uses
The Arducam PTZ camera is well suited to day and night security monitoring, motion detection, wildlife photography and other machine vision projects where remote framing is valuable. Its zoom range and IR-Cut switching make it a flexible choice for observing areas that change in distance or lighting.
What's in the Box
- 1 x Arducam PTZ Lens, assembled with 12MP IR-Cut switchable camera board and camera control board
- 1 x 15-Pin to 22-Pin Ribbon Cable (30 cm)
- 1 x 22-Pin Ribbon Cable (30 cm)
- 1 x XH2.54 Jumper Wire with 6-Pin Female Connector (30 cm)
- 4 x Plastic Standoffs for the Base
Quick specs
- Item Type
- Camera Module
- Resolution
- 12MP
- Sensor
- IMX477
- Pixel Size (um)
- 1.55 µm x 1.55 µm
- Optical Size
- 1/2.3″
- Video Modes on Raspberry Pi
- 1080p30, 720p60 and 640 × 480p60/90
Frequently Bought Together

Arducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
$107.99
Arducam 12MP IMX477 Motorized Focus High Quality Camera for Jetson Nano
$109.99
Arducam 12MP IMX477 Motorized Focus High Quality Camera for Raspberry Pi
$142.99
Arducam High Quality IR-CUT Camera for Jetson Nano/Xavier NX, 12.3MP 1/2.3 Inch IMX477 HQ Camera Module with 6mm CS Lens
$107.99
















