Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera Module; width (mm) 26; weight (g) 8.

Key Highlights

  • Item Type: Camera Module
  • Width (mm): 26
  • Weight (g): 8

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCamera Module
Width (mm)26
Weight (g)8
Shipping Weight0.012 kg
Shipping Dimensions6 × 5 × 3 cm

Overview

The Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+ and CM4, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Camera Module (resolution is one factor; lens and lighting matter as much)
  • Width (mm): 26 (measure your mounting space before ordering)
  • Weight (g): 8 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 6 × 5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+, and CM4 is one of the best low-cost cameras in the market. Based on the IMX219 image sensor this camera module can get a resolution of 3280 x 2464 with frame rates up to 120fps at 720P. The camera module is based on the 1/4" 8MP IMX219 sensor, which gives a sharp image. Unlike other camera modules, this Arducam IMX219 camera module is equipped with 175° wide-angle M12lens, which provides a much wider field of view compared to the stock lens on the V2 camera. Along with NVIDIA Jetson Nano, this camera module can also be used with other hardware like ARM, DSP, FPGA, etc. Note: This camera module is compatible with Raspberry Pi compute modules only, not with Raspberry Pi Development Board.

Useful link:

  1. To use this camera, please follow this tutorial for hardware setup.
  2. After hardware setup, please follow this tutorial for software setup.

Features:

  1. Sony 8MP IMX219 Sensor
  2. Optical Format: 1/4 inch
  3. Frame Rate: 30fps@8MP, 60fps@1080p, 120fps@720p
  4. Data Format: RAW8/RAW10
  5. EFL: 2.5mm
  6. F.NO: 2.8
  7. Focus Type: Fixed Focus
  8. View Angle: 175(D) x 155(H) x 115(V)
  9. Interface: MIPI CSI-2 2-lane/4-lane
  10. IR Sensitivity: Integral IR Filter, visible light only

Package Includes:

1 x Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+, and CM4

1 x 1.0mm pitch 15cm 15 pin FPC Cable

Quick specs

Item Type
Camera Module
Width (mm)
26
Weight (g)
8
Shipping Weight
0.012 kg
Shipping Dimensions
6 × 5 × 3 cm
See all specifications

More from Arducam

View all →

Related Products

View all →