Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 5MP OV5647 camera module for Raspberry Pi 4, 3B+ and 3 with no IR filter, so it can image in low light and with IR illumination. It shoots 2592 x 1944 stills and 1080p video on a slim 6 mm-neck flex cable.

Key Highlights

  • 5MP Omnivision OV5647 sensor with 2592 x 1944 still resolution
  • NoIR design without an integral IR filter for low-light work
  • 1080p video capture at up to 30fps
  • 54 x 41 degree field of view with fixed focus from 1 m to infinity
  • 300 mm flex cable with a narrow 6 mm neck
  • Lightweight module at roughly 10 g

Ideal For

  • Raspberry Pi hobbyists building low-light camera projects
  • Makers constructing endoscope or inspection tools
  • DIY surveillance and monitoring setups
  • Students learning camera integration on Raspberry Pi
  • Builders of small battery-powered camera gadgets

Buying Tip

Check that your project can supply IR or low-light illumination, since the NoIR sensor is designed to take advantage of it rather than replace it.

Elecvora expert review

Our verdict

A sensible choice for Raspberry Pi users who need a small camera that can see near-infrared light and fit through tight spaces. It is not a general-purpose colour camera, so buy it for the NoIR behaviour and slim cable, not for vivid daylight colour.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • NoIR sensor works with IR illumination for low-light scenes
  • High 2592 x 1944 still resolution
  • Slim 6 mm neck and 300 mm cable ease installation
  • Lightweight at about 10 g
  • 1080p video at up to 30fps

Cons

  • Colour can look unnatural without the IR filter
  • Fixed focus will not suit very close macro work
  • Raspberry Pi board and IR lighting are not included

Best for

Low-light and IR-assisted Raspberry Pi camera projects

Not ideal for

Buyers wanting accurate daylight colour straight from the camera

Specifications

Item TypeCamera Module
Resolution5MP
Angle (FOV)54°×41°
Resolution (pixels)2592 x 1944
Length (mm)300
Width (mm)20
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x Arducam 5MP OV5647 NoIR Camera Module for Raspberry Pi

Frequently Asked Questions

Which Raspberry Pi boards does this camera work with?
It is intended for Raspberry Pi 4, 3B+ and 3 boards. The Raspberry Pi itself is not included.
What does NoIR mean?
The module has no integral IR filter, so the sensor can respond to near-infrared light. This helps in low light when IR illumination is used.
What resolution can it capture?
Stills are captured at 2592 x 1944 pixels, and video records at up to 1080p and 30fps.
How close can it focus?
The lens is fixed focus from 1 m to infinity, so subjects closer than about 1 m may not be sharp.
Is a Raspberry Pi included in the box?
No. Only the Arducam camera module is supplied; the Raspberry Pi shown in images must be purchased separately.
How should I care for the module?
Handle the flex cable gently, avoid bending it sharply at the connector, and keep the lens free of dust and fingerprints.

Overview

The Arducam 5MP OV5647 NoIR Camera Module is an add-on camera board for Raspberry Pi 4, 3B+ and 3 computers. It uses an Omnivision OV5647 sensor behind a fixed-focus lens, and unlike a standard camera it ships without an integral IR filter. That omission lets the sensor register near-infrared light, which is useful for low-light imaging and for projects that pair the camera with IR illumination.

The module is small and light, and its flex cable runs 300 mm with a neck just 6 mm wide. That narrow neck helps when the camera has to pass through a tight opening or sit inside a slim enclosure.

Key Features

  • 5MP OV5647 sensor: captures still images at 2592 x 1944 pixels.
  • NoIR construction: no integral IR filter, so the camera can respond to infrared light.
  • 1080p video: records at up to 30fps.
  • 54 x 41 degree field of view: a 35 mm full-frame equivalent perspective.
  • Fixed focus: sharp from 1 m to infinity.
  • Slim flex cable: 300 mm long with a 6 mm neck for tight routes.

Specifications Explained

The 2592 x 1944 pixel count gives detailed stills for documentation, inspection and monitoring. Video is capped at 1080p and 30fps, which is well suited to live previews and recorded clips rather than high-frame-rate action.

The 54 x 41 degree angle of view is fairly narrow, so the camera frames a subject rather than a whole room; at 2 m it covers roughly 2.0 x 1.33 m. Fixed focus from 1 m to infinity means no adjustment is needed for most subjects, though very close macro work is outside its range. Because there is no IR filter, colours can look different under visible light, which is normal for NoIR sensors.

Compatibility and Requirements

The module is intended for Raspberry Pi 4, 3B+ and 3 boards. A Raspberry Pi computer is not included and must be purchased separately. Hardware and software setup should follow the tutorial referenced for this camera so the correct configuration is applied.

Typical Uses

  • Endoscope-style inspection builds where the 6 mm neck helps.
  • Surveillance and monitoring projects, including low-light scenes.
  • Battery-powered gadgets and toys that need a small camera.
  • Learning projects on Raspberry Pi boards.

What's in the Box

One Arducam 5MP OV5647 NoIR Camera Module for Raspberry Pi is supplied. The Raspberry Pi board shown in product images is not included.

Quick specs

Item Type
Camera Module
Resolution
5MP
Angle (FOV)
54°×41°
Resolution (pixels)
2592 x 1944
Length (mm)
300
Width (mm)
20
See all specifications

More from Arducam

View all →

Related Products

View all →