Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete Arduino Uno R3 starter kit with sensors, displays, motors and an 830-point breadboard for hands-on electronics learning. It lets beginners move from basic circuits to sensor and RFID projects using one organised set of parts.

Key Highlights

  • Arduino Uno R3 board based on the ATmega328P controller
  • LCD1602 I2C, 7-segment and 8x8 dot matrix displays included
  • DHT11, LM35, flame, LDR and sound sensors for data projects
  • SG90 servo, 5V stepper motor with ULN2003 driver and relay module
  • RFID module, IR receiver with remote and 16-key matrix keypad
  • 830-point breadboard, jumper wires and 9V battery connector

Ideal For

  • Students beginning Arduino and electronics courses
  • Hobbyists building sensor and display prototypes
  • STEM teachers assembling classroom project kits
  • Makers exploring RFID, IR and motor control

Buying Tip

Check that you have a computer with a USB port and the Arduino IDE ready before starting, and add a 9V battery only if you need untethered power.

Elecvora expert review

Our verdict

This is a well-rounded starter kit that covers displays, sensors, motors and communication in one package, making it easy to grow from simple circuits to complete projects. The included breadboard and wiring set keep experimentation organised for learners.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide module variety across sensors, displays and actuators
  • Uno R3 board with 830-point breadboard included
  • RFID, IR remote and keypad add interactive options
  • USB and 9V battery power support

Cons

  • A 9V battery is not included
  • No detailed project tutorials are listed
  • Some modules require careful pin mapping for beginners

Best for

Students and hobbyists starting Arduino projects

Not ideal for

Advanced users wanting a single specialised module set

Specifications

Main controllerArduino UNO R3 (ATmega328P)
DisplayLCD1602 I2C, 7-Segment, Dot Matrix
SensorDHT11, LM35, Flame Sensor, LDR, Sound Sensor
Actuator TypeSG90 Servo, 5V Stepper Motor + ULN2003
CommunicationIR Receiver + Remote, RFID Module
Module TypeRelay, RTC, Joystick, Water Level, Shift Register
Power SupportUSB / 9V Battery Connector
Breadboard830-point high-quality
Shipping Weight0.6 kg
Shipping Dimensions25 × 16 × 6 cm

What's in the box

  • 1 x UNO R3 Board
  • 1 x USB Cable (30 cm)
  • 1 x LCD1602 IIC/I2C Display
  • 1 x RC522 Module
  • 1 x White Card
  • 1 x RFID Key Ring
  • 1 x PS2 Joystick Module
  • 1 x 16-Key Matrix Keypad
  • 1 x RTC Module
  • 1 x Water Level Sensor Module
  • 1 x Humidity Sensor Module
  • 1 x RGB LED Module
  • 1 x Motor Driver Module
  • 1 x 5V Stepper Motor
  • 1 x Channel Module
  • 1 x 830-Point Breadboard
  • 1 x Jumper Wires Set
  • 1 x 10-Pin Dupont Cable (Male to Female)
  • 1 x Sound Sensor Module
  • 1 x IR Remote Control
  • 1 x Potentiometer
  • 1 x Single-Digit Display
  • 1 x Four-Digit Display
  • 1 x 8x8 Dot Matrix Display
  • 1 x SG90 Servo Motor
  • 1 x Active Buzzer
  • 1 x Passive Buzzer
  • 2 x Roll Ball Switch
  • 3 x Photoresistance
  • 5 x Push Button Switch with Cap
  • 1 x 9V Battery Connector
  • 30 x LEDs (Red/Green/Yellow)
  • 30 x Resistors (220Ω, 10KΩ, 1KΩ)
  • 1 x Flame Sensor
  • 1 x IR Receive Sensor
  • 1 x 74HC595 IC
  • 1 x LM35DZ Temperature Sensor
  • 1 x 40 Pin Header

Frequently Asked Questions

What controller does this kit use?
The kit is built around the Arduino Uno R3 board with an ATmega328P controller. All included modules connect to it through the breadboard and jumper wires.
Do I need to buy a battery?
A 9V battery connector is included, but the battery itself is not listed in the package. The board can run from USB power during programming and testing.
Can I use this kit without prior programming experience?
Yes, it is aimed at beginners and covers basic circuits through to sensor and RFID projects. You will need to install the Arduino IDE and follow example sketches.
What displays are included?
The kit includes an LCD1602 I2C display, single-digit and four-digit 7-segment displays, and an 8x8 dot matrix display. Each can be used for different data presentation tasks.
Is a computer required?
Yes, a computer with a USB port is needed to program the Uno R3. The included 30 cm USB cable connects the board to your computer.
How should I store the kit?
Keep the modules in the retail box and avoid bending the jumper wires or header pins. Store the board away from moisture and static-prone surfaces.

Overview

The Arduino Uno R3 Upgraded Learning Kit is a structured way to start programming and building real circuits. At its centre is the Uno R3 board with an ATmega328P controller, which connects to a wide spread of included modules through an 830-point breadboard and a full jumper wire set. Instead of buying parts one at a time, you get displays, sensors, actuators and communication modules in a single box.

Key Features

  • Broad display set: an LCD1602 I2C screen, single-digit and four-digit 7-segment displays, and an 8x8 dot matrix let you present data in several ways.
  • Sensor coverage: DHT11 humidity, LM35 temperature, flame, LDR and sound sensors support environmental and interactive projects.
  • Motion and control: an SG90 servo, a 5V stepper motor with ULN2003 driver, a relay module and a PS2 joystick cover movement and switching tasks.
  • Communication modules: an RFID module with card and key ring, plus an IR receiver and remote, open the door to access and remote-control experiments.
  • Supporting parts: RTC, water level sensor, shift register IC, buzzers, switches, LEDs and resistors are included for wider experimentation.

Specifications Explained

The Uno R3 board is the brain of the kit and handles input from sensors and output to displays and motors. The LCD1602 with I2C reduces wiring because it uses a compact serial connection, while the 7-segment and dot matrix displays are useful for learning how data is visualised. The DHT11 and LM35 cover humidity and temperature sensing, and the flame, LDR and sound sensors add light, sound and safety-themed experiments. For motion, the SG90 servo is suited to small angular movements, and the 5V stepper motor with ULN2003 driver demonstrates precise step control. The relay module, RTC and joystick extend projects into switching, timekeeping and user input, and the 74HC595 shift register teaches pin expansion. Power can come from USB or a 9V battery connector, so the kit works at a desk or in a portable setup.

Compatibility and Requirements

The kit is built around the Arduino Uno R3 and its ATmega328P controller. It requires a computer with a USB port for programming and a USB cable, which is included at 30 cm length. A 9V battery is optional and is not listed in the package, so it must be supplied separately if you want battery power. All modules connect through the breadboard and included jumper wires.

Typical Uses

Use the kit for classroom STEM lessons, self-study programming courses, weekend DIY builds and early prototyping. Typical projects include weather readouts, RFID card readers, remote-controlled outputs, motor demonstrations and display-based data monitors.

What's in the Box

The box contains an Uno R3 board, USB cable, LCD1602 I2C display, RFID module with white card and key ring, PS2 joystick, 16-key matrix keypad, RTC module, water level sensor, humidity sensor, RGB LED module, motor driver module, 5V stepper motor, 830-point breadboard, jumper wires, 10-pin Dupont cable, sound sensor, IR remote and receiver, potentiometer, single-digit and four-digit displays, 8x8 dot matrix, SG90 servo, active and passive buzzers, roll ball switches, photoresistors, push buttons with caps, 9V battery connector, LEDs, resistors, flame sensor, 74HC595 IC, LM35DZ sensor and a 40-pin header.

Quick specs

Main controller
Arduino UNO R3 (ATmega328P)
Display
LCD1602 I2C, 7-Segment, Dot Matrix
Sensor
DHT11, LM35, Flame Sensor, LDR, Sound Sensor
Actuator Type
SG90 Servo, 5V Stepper Motor + ULN2003
Communication
IR Receiver + Remote, RFID Module
Module Type
Relay, RTC, Joystick, Water Level, Shift Register
See all specifications