Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by ASAIR, this flow sensors is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 4.75 to 5.5; model no. / name AFM3000; measurement range 200~+200SLM. Check that your power source supplies 4.75 to 5.5 before connecting it.

Key Highlights

  • Operating Voltage (VDC): 4.75 to 5.5
  • Model No. / Name: AFM3000
  • Measurement Range: 200~+200SLM

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (VDC)4.75 to 5.5
Model No. / NameAFM3000
Measurement Range200~+200SLM
Accuracy1.5% m.v. (typical)
Repeatability±0.5%(typical)Test gases air, N2, O2, non – corrosive gases
InterfaceI2C
ColorAs per Image
Shipping Weight0.022 kg
Shipping Dimensions13 × 10 × 2 cm

Overview

The ASAIR AFM3000 Mass Flow Meter, made by ASAIR, is listed in our flow sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (VDC): 4.75 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Model No. / Name: AFM3000
  • Measurement Range: 200~+200SLM (quoted range is usually line-of-sight; walls and interference shorten it)
  • Accuracy: 1.5% m.v. (typical)
  • Repeatability: ±0.5%(typical)Test gases air, N2, O2, non – corrosive gases
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Color: As per Image
  • Shipping Weight: 0.022 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a AFM3000 Mass Flow Meter. The AFM3000 medical flow sensor is Aosong’s digital flow meter designed specifically for ventilator applications. It measures the flow rate of air, oxygen and other non-aggressive gases with superb accuracy. A special design of the mass flow sensor channel results in the very low-pressure drop through the flow body of the sensor making it extremely suitable for very demanding applications, such as medical ventilation and respiratory applications. The AFM3000 sensor is Aosong’s digital flow meter designed specifically for ventilator applications. It measures the flow rate of air, oxygen and other non-aggressive gases with superb accuracy. A special design of the flow channel results in the very low pressure drop through the flow body of the sensor making it extremely suitable for very demanding applications, such as medical ventilation and respiratory applications. The AFM3000 operates from a 5 Volt supply voltage and features a digital I2C interface. The measurement results are internally linearized and temperature compensated. The outstanding performance of this sensor is based on Aosong’s sensor technology, which combines a thermal sensor chip and a high-performance integrated 24-bit AD acquisition CMOS microprocessor. The flow rate of the gas is measured by a thermal sensor element which assures very fast signal processing time and bidirectional measurement with best-in-class accuracy. Application:
  1. Medical
  2. Process automation
  3. Burner control
  4. Fuel cell control
  5. Spectroscopy
  6. Environment monitoring
  7. Laboratory

Features: 

  1. Low-pressure drop
  2. Flow range: +/- 200 slm (bidirectional)
  3. Accuracy 1.5% m.v. (typical)
  4. Very fast update time
  5. Fully calibrated & temperature compe-nsated
  6. Low zero drift

Package Includes:

1 x ASAIR AFM3000 Mass Flow Meter

Quick specs

Operating Voltage (VDC)
4.75 to 5.5
Model No. / Name
AFM3000
Measurement Range
200~+200SLM
Accuracy
1.5% m.v. (typical)
Repeatability
±0.5%(typical)Test gases air, N2, O2, non – corrosive gases
Interface
I2C
See all specifications