
1 / 3 · Click to enlarge
AI Summary
A bare ATmega16/ATmega32 ISP minimum development board measuring 90 x 40 mm with an onboard reset button. It gives you a compact, reusable base for wiring your own AVR circuits without pre-assembled extras.
Key Highlights
- Supports ATmega16 and ATmega32 AVR microcontrollers
- Bare board design for DIY circuit wiring
- Onboard reset button for quick restarts
- Compact 90 x 40 mm footprint, 46 g
- ISP-ready minimum system layout
- No soldering or assembly pre-fitted
Ideal For
- Embedded developers prototyping with ATmega16 or ATmega32
- Students learning AVR microcontroller programming
- Hobbyists who prefer bare boards for custom wiring
- Makers building compact automation or control circuits
- Instructors preparing hands-on microcontroller exercises
Buying Tip
Remember that the ATmega16 or ATmega32 chip is not included, so order the microcontroller separately if you do not already have one.
Elecvora expert review
Our verdict
A simple, honest minimum system board that does one job well: giving ATmega16 and ATmega32 projects a compact, reusable base. It rewards buyers who are comfortable wiring their own circuits and already own the chip.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports both ATmega16 and ATmega32
- Compact 90 x 40 mm footprint
- Onboard reset button for quick testing
- Lightweight and easy to store or carry
Cons
- Microcontroller chip is not included
- Bare board requires your own wiring and assembly
- Package contents are not clearly specified
Best for
Developers and students who want a minimal AVR base for custom builds
Not ideal for
Buyers expecting a ready-assembled board with the chip included
Specifications
| Item Type | Development Board |
|---|---|
| Support Chips | ATmega16/ATmega32 |
| Reset Button (Y/N) | YES |
| Length (mm) | 90 |
| Width (mm) | 40 |
| Weight (g) | 46 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 9 × 4 × 3 cm |
Frequently Asked Questions
Does this board include the ATmega16 or ATmega32 chip?
Which microcontrollers does it support?
Is the board pre-assembled?
Does it have a reset button?
What are the board dimensions?
What is included in the package?
Overview
This minimum development system board is designed for the ATmega16 and ATmega32 AVR microcontrollers. It provides a compact base on which you build the circuit you need, rather than a fully populated kit. The board measures 90 mm by 40 mm and weighs 46 g, so it takes up little room on a bench or inside a small project enclosure.
Because the board arrives bare, it is a good fit for learners and developers who prefer to wire things themselves and understand each connection. An onboard reset button lets you restart the microcontroller quickly during testing.
Key Features
- Dual chip support: works with both ATmega16 and ATmega32 microcontrollers.
- Reset button: a dedicated button for restarting the chip during programming and testing.
- Compact dimensions: 90 mm length and 40 mm width keep the footprint small.
- Lightweight: 46 g board weight, with shipping weight around 0.05 kg.
- DIY friendly: no soldering or assembly is pre-done, so you choose your own circuit.
Specifications Explained
The two figures that matter most are chip support and size. ATmega16 and ATmega32 support means the board is intended for these two AVR parts, so plan your build around one of them. The 90 x 40 mm size is small enough for tight spaces but still leaves room for your own headers and components. The reset button is a small convenience that saves you from power-cycling the board every time you want to restart a test.
Compatibility and Requirements
The board supports ATmega16 and ATmega32 chips. Note that the AVR chip itself is not included, so you will need to supply the microcontroller separately. As a bare board, it does not come pre-assembled, and you should expect to do your own wiring for the circuit you want to build.
Typical Uses
- Learning AVR microcontroller basics in a classroom or at home.
- Building and testing prototype circuits around ATmega16 or ATmega32.
- Creating custom electronics where a minimal board is preferred.
- Practising ISP programming and debugging routines.
What's in the Box
Package contents are not specified by the manufacturer. Please check the listing details before ordering if you need to confirm exactly what is included.
Quick specs
- Item Type
- Development Board
- Support Chips
- ATmega16/ATmega32
- Reset Button (Y/N)
- YES
- Length (mm)
- 90
- Width (mm)
- 40
- Weight (g)
- 46













