Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A genuine Bambu Lab replacement shaft assembly that supports filament feeding inside the AMS on P1P, P1S and X1C printers. Its precise plastic fit helps restore smooth, consistent material delivery for multi-colour and multi-material prints.

Key Highlights

  • Direct replacement driven support shaft for the Bambu Lab AMS
  • Designed to fit P1P, P1S and X1C printers without modification
  • Helps maintain steady filament feeding toward the extruder
  • Plastic construction rated for temperatures up to 70°C
  • Compact 20 x 10 mm part weighing about 30 g
  • Useful when AMS feeding becomes uneven or unreliable

Ideal For

  • Bambu Lab P1P owners servicing their AMS
  • P1S users running multi-colour prints
  • X1C owners keeping spare AMS parts on hand
  • Makers who maintain their own 3D printers
  • Anyone troubleshooting uneven AMS filament feeding

Buying Tip

Confirm your printer is a P1P, P1S or X1C and inspect the existing shaft before ordering, since this assembly is model-specific and not a universal AMS part.

Elecvora expert review

Our verdict

A small but important service part that keeps the AMS feeding filament as intended on P1P, P1S and X1C machines. It is a low-cost way to address wear-related feeding problems rather than replacing a larger assembly.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine Bambu Lab part for the AMS
  • Fits P1P, P1S and X1C specifically
  • Compact and light, easy to handle
  • Simple to install with basic AMS access

Cons

  • Only fits the three listed printer models
  • Requires opening the AMS to install
  • Plastic part with a 70°C limit, not for high-heat use

Best for

P1P, P1S and X1C owners maintaining or repairing their AMS

Not ideal for

Printers outside the P1P, P1S and X1C range

Specifications

Item TypeDriven Support Shaft Assembly
CompatibilityP1P, P1S, X1C
MaterialPlastic
Temperature Resistance (°C)Up to 70°C
Length (mm)20
Width (mm)10
Weight (g)30
Shipping Weight0.034 kg
Shipping Dimensions17 × 8 × 3 cm

What's in the box

  • 1 x Bambu Lab AMS Driven Support Shaft Assembly for P1P, P1S, X1C

Frequently Asked Questions

Which printers is this shaft assembly compatible with?
It is designed for the Bambu Lab P1P, P1S and X1C printers. It is not listed as compatible with other models.
What does this part actually do?
It supports the filament path inside the Automatic Material System, helping filament feed consistently toward the extruder during printing.
Does it require any power or wiring?
No. It is a mechanical plastic assembly that fits into the AMS; no separate power connection is described for this part.
What is included in the package?
The package contains one Bambu Lab AMS Driven Support Shaft Assembly for P1P, P1S and X1C.
What temperature can it handle?
The plastic is rated for temperatures up to 70°C, which suits normal AMS operating conditions.
How should I care for it?
Keep it clean and free of dust or filament debris, and check it during routine AMS maintenance for wear or binding.

Overview

The Bambu Lab AMS Driven Support Shaft Assembly is a service part for the Automatic Material System used on the P1P, P1S and X1C 3D printers. Inside the AMS, filament has to travel from the spool through a guided path before it reaches the extruder. This assembly is one of the components that supports that path, helping the material advance in a controlled way rather than slipping or catching.

Because it is a genuine Bambu Lab part made for these three printer models, it installs where the original sits and works with the surrounding AMS hardware. It is a sensible item to keep on hand if you print often, change filaments regularly, or notice that the AMS is no longer feeding as smoothly as it once did.

Key Features

  • AMS integration: built specifically for the Automatic Material System on P1P, P1S and X1C printers.
  • Feeding support: helps drive filament consistently along the AMS path toward the extruder.
  • Precise fit: shaped to match the assembly so replacement is straightforward.
  • Practical material: plastic construction with temperature resistance up to 70°C.
  • Compact size: approximately 20 mm long, 10 mm wide and 30 g in weight.

Specifications Explained

Compatibility is limited to the P1P, P1S and X1C, so check your model before ordering. Temperature resistance up to 70°C covers the normal conditions inside an operating AMS; it is not intended for high-heat environments. The 20 mm by 10 mm size and 30 g weight describe a small, light part that is easy to handle during maintenance. The shipping weight of 0.034 kg and shipping dimensions of 17 x 8 x 3 cm reflect the compact packaging the part arrives in.

Compatibility and Requirements

This assembly is intended for Bambu Lab P1P, P1S and X1C printers equipped with the Automatic Material System. It is not listed as compatible with other printer models. Installation requires access to the AMS interior, so basic familiarity with removing AMS covers and handling small components is helpful.

Typical Uses

Owners use this part when servicing an AMS that has developed uneven filament feeding, and as a spare during routine maintenance. It is also relevant for anyone running multi-material or multi-colour prints where consistent feeding across several spools matters.

What's in the Box

  • 1 x Bambu Lab AMS Driven Support Shaft Assembly for P1P, P1S, X1C

Quick specs

Item Type
Driven Support Shaft Assembly
Compatibility
P1P, P1S, X1C
Material
Plastic
Temperature Resistance (°C)
Up to 70°C
Length (mm)
20
Width (mm)
10
See all specifications