Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A replacement plastic top lid for the Bambu Lab AMS unit on X1, X1C, P1P and P1S printers. It fits securely to keep dust and debris out of the material system with no tools needed.

Key Highlights

  • Replacement AMS top lid for Bambu Lab X1, X1C, P1P and P1S
  • Durable plastic construction weighs about 100 g
  • 250 mm by 250 mm footprint for a secure, accurate fit
  • Helps keep dust, dirt and debris out of the AMS unit
  • Tool-free installation so you can fit it in minutes
  • Sleek design that blends with the printer's appearance

Ideal For

  • Bambu Lab X1 and X1C owners with the AMS unit
  • P1P and P1S users who want to protect their AMS
  • Makers replacing a cracked or missing AMS lid
  • Workshop users dealing with dust and debris
  • Buyers keeping a spare part for maintenance

Buying Tip

Check that your printer is running the AMS unit before ordering, since this lid is an AMS part and not a general printer cover.

Elecvora expert review

Our verdict

This is a straightforward genuine replacement part that does exactly what it should: cover the AMS and keep dust out. If your original lid is cracked or missing, fitting this one restores protection with no tools and no fuss.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Exact fit for the AMS on X1, X1C, P1P and P1S
  • Lightweight at about 100 g yet durable
  • Tool-free installation in minutes
  • Matches the printer's clean look

Cons

  • Only useful for printers with the AMS unit
  • A replacement part rather than an upgrade
  • No extra hardware or accessories included

Best for

Bambu Lab owners replacing a damaged or missing AMS top lid

Not ideal for

Printers running without the AMS unit

Specifications

Item TypeAMS Top Lid
CompatibilityX1, X1C, P1P, P1S
MaterialPlastic
Length (mm)250 mm
Width (mm)250
Weight (g)100
Shipping Weight1.18 kg
Shipping Dimensions40 × 30 × 14 cm

What's in the box

  • 1 x Bambu Lab AMS Top Lid for X1, X1C, P1P and P1S

Frequently Asked Questions

Which printers does this lid fit?
It is designed for the Bambu Lab X1, X1C, P1P and P1S printers that have the AMS unit installed.
Do I need tools to install it?
No. The lid attaches without additional tools, so you can fit it by hand in a few minutes.
Does it require power or wiring?
No. It is a passive plastic cover with no electronics, connectors or power requirements.
What is included with the lid?
The package contains one Bambu Lab AMS Top Lid for X1, X1C, P1P and P1S.
How should I clean the lid?
Wipe it with a soft, slightly damp cloth. Avoid harsh solvents that could dull or damage the plastic.
Is this the same size as the original lid?
It measures 250 mm by 250 mm and is shaped to cover the AMS opening for a secure fit.

Overview

The Bambu Lab AMS Top Lid is a direct replacement cover for the Automatic Material System on Bambu Lab X1, X1C, P1P and P1S 3D printers. The AMS handles filament switching and storage, and its internals are exposed when the lid is missing or damaged. This lid closes that gap, shielding the unit from dust, dirt and stray particles that can settle on components over time.

Made from durable plastic and weighing roughly 100 g, the lid adds protection without adding noticeable bulk. Its 250 mm by 250 mm footprint is sized for the AMS housing, so it seats cleanly and stays in place during normal printing. The finish is understated and matches the printer's overall look.

Key Features

  • Purpose-built cover: designed specifically as the AMS top lid for X1, X1C, P1P and P1S printers.
  • Dust and debris barrier: helps keep particles out of the material system so it stays clean.
  • Durable plastic: a lightweight 100 g part that stands up to regular handling.
  • Secure fit: the 250 mm by 250 mm size is matched to the AMS opening.
  • Simple installation: no additional tools are required to attach it.
  • Clean appearance: a sleek, minimalist shape that complements the printer.

Specifications Explained

Size and weight

At 250 mm long and 250 mm wide, the lid is sized to cover the AMS unit rather than sit loosely on top. The 100 g weight keeps it light enough to lift off for filament access while still feeling substantial in the hand.

Material

The plastic construction is chosen for everyday durability. It resists the knocks and handling that come with loading filament and cleaning the AMS, and it is easy to wipe down.

Shipping figures

The packed shipment is listed at 1.18 kg with carton dimensions of 40 by 30 by 14 cm. These figures reflect protective packaging for transit, not the size of the lid itself.

Compatibility and Requirements

This lid is intended for Bambu Lab X1, X1C, P1P and P1S printers that are equipped with the AMS unit. It is an AMS part, so it is not a fit for printers running without that system. No extra hardware or tools are needed for installation.

Typical Uses

  • Replacing a cracked, scratched or missing AMS top lid.
  • Keeping dust off the AMS internals in a workshop or garage.
  • Restoring a clean look after buying a used printer.
  • Keeping a spare part ready for maintenance or repair.

What's in the Box

1 x Bambu Lab AMS Top Lid for X1, X1C, P1P and P1S.

Quick specs

Item Type
AMS Top Lid
Compatibility
X1, X1C, P1P, P1S
Material
Plastic
Length (mm)
250 mm
Width (mm)
250
Weight (g)
100
See all specifications