
1 / 3 · Click to enlarge
AI Summary
A compact replacement Micro Lidar sensor for Bambu Lab X1 and P1 series printers. It restores automated nozzle height calibration, flow compensation and first layer inspection so prints start accurately.
Key Highlights
- Micrometer-level depth sensing for accurate nozzle height calibration
- Automates extrusion flow compensation during calibration routines
- Inspects the first layer to confirm proper adhesion and formation
- Dual sensor bed levelling for consistent, repeatable results
- Monitors print progress and can halt a detected failure
- Compact metal and plastic housing, 50 mm long and 26 g
Ideal For
- Owners of Bambu Lab X1, X1C or X1E printers replacing a faulty sensor
- P1P and P1S users restoring automated calibration features
- Makers who rely on first layer inspection for consistent adhesion
- Operators running repeated print jobs who want failure detection
- Anyone servicing their own Bambu Lab print head assembly
Buying Tip
Confirm your printer is a P1P, P1S, X1, X1C or X1E before ordering, since this module is not listed for other models.
Elecvora expert review
Our verdict
A focused replacement part that brings back the automated calibration and inspection features these printers are known for. It is a sensible spare to keep on hand for anyone servicing their own machine.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Restores automated nozzle height and flow calibration
- Supports first layer inspection and failure detection
- Small and light at 26 g with a compact 50 mm body
- Listed for a broad set of Bambu Lab models
Cons
- Only compatible with the listed Bambu Lab printers
- Requires care when fitting around the print head assembly
- No installation instructions beyond the supplied glue
Best for
Bambu Lab X1 and P1 series owners replacing a failed sensor
Not ideal for
Printers outside the listed compatible models
Specifications
| Item Type | Micro Lidar |
|---|---|
| Compatibility | P1P, P1S, X1, X1C, X1E |
| Material | Metal and plastic |
| Color | Black |
| Length (mm) | 50 |
| Width (mm) | 30 |
| Weight (g) | 26 |
| Shipping Weight | 0.038 kg |
| Shipping Dimensions | 18 × 7 × 5 cm |
What's in the box
- 1 x Bambu Lab Micro Lidar
- 1 x silicon glue
Frequently Asked Questions
Which printers is this Micro Lidar compatible with?
What does the sensor actually do?
What is included with the module?
How large and heavy is the part?
Do I need to calibrate after fitting it?
How should I store a spare module?
Overview
The Bambu Lab Micro Lidar is a precision sensor module built for compatible Bambu Lab 3D printers. It measures depth at micrometer accuracy, giving the printer a reliable picture of the bed surface and the material being laid down. That information feeds directly into calibration and inspection routines, helping each print start on a well-set first layer instead of relying on manual adjustment.
This is a small, self-contained part measuring 50 mm by 30 mm and weighing 26 g, finished in black with a metal and plastic construction. It is intended as a direct component for the listed printer models, so owners can replace a damaged or non-functioning unit and bring the automated features back online.
Key Features
- High precision: micrometer-level depth measurement supports accurate nozzle height setting and consistent first layers.
- Advanced calibration: the module assists with automated nozzle height adjustment and extrusion flow compensation.
- First layer inspection: the printer can analyse the opening layer to confirm adhesion and proper layer formation.
- Enhanced bed levelling: a dual sensor arrangement provides redundant levelling data for repeatable results.
- Failure detection: print progress is monitored so the machine can stop when a problem is detected.
Specifications Explained
The 50 mm length and 30 mm width describe the physical footprint of the module, which matters when checking clearance around the print head assembly. At 26 g, it adds very little mass to the moving assembly. The metal and plastic build balances rigidity with a low weight, and the black finish keeps it visually neutral inside the printer.
Shipping weight is listed at 0.038 kg and the shipping dimensions are 18 x 7 x 5 cm, so the part arrives in a small protective pack. The item type is Micro Lidar, and the compatibility list covers P1P, P1S, X1, X1C and X1E printers.
Compatibility and Requirements
This sensor is listed for use with the Bambu Lab P1P, P1S, X1, X1C and X1E. Check your printer model before ordering, because the module is designed around these specific machines and their existing electronics and firmware routines. No other compatibility is stated.
Typical Uses
Owners typically fit this module when the original sensor has failed or been damaged, or when calibration and first layer inspection are no longer behaving as expected. Once installed, the printer can carry out its automated bed levelling, nozzle height calibration and flow compensation routines, and can monitor prints for detected failures.
What's in the Box
- 1 x Bambu Lab Micro Lidar
- 1 x silicon glue
Quick specs
- Item Type
- Micro Lidar
- Compatibility
- P1P, P1S, X1, X1C, X1E
- Material
- Metal and plastic
- Color
- Black
- Length (mm)
- 50
- Width (mm)
- 30
















