
1 / 3 · Click to enlarge
AI Summary
A replacement control board fan made for Bambu Lab P1S, X1C and X1E printers, running at 5 V and 4000 rpm. It keeps the control board electronics cooled during long prints and is rated for 20000 hours at 40°C.
Key Highlights
- 5 V control board fan rated at 4000 rpm
- Built specifically for Bambu Lab P1S, X1C and X1E
- 20000-hour life rating at 40°C for continuous duty
- Lightweight at 25 g with a compact black housing
- Rubber, plastic and metal construction for stable mounting
- Straightforward to fit when servicing the control board
Ideal For
- Bambu Lab P1S owners replacing a noisy or failed control board fan
- X1C users servicing the electronics compartment
- X1E operators keeping spare cooling parts on hand
- Anyone rebuilding a printer after control board maintenance
Buying Tip
Check the fan connector and mounting points on your existing unit before ordering, since this part is specific to the P1S, X1C and X1E rather than a universal fan.
Elecvora expert review
Our verdict
A sensible, model-specific spare that removes the guesswork from cooling repairs on the P1S, X1C and X1E. The 5 V, 4000 rpm specification and 20000-hour rating at 40°C are exactly what you want to see on a part that runs whenever the printer does.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Correct fit for the three listed Bambu Lab models
- Low 5 V operating voltage matched to the control board feed
- Long 20000-hour life rating at 40°C
- Light 25 g unit that is easy to handle and mount
Cons
- Not compatible with other printer models
- Only the fan is included, no mounting hardware or tools
Best for
Owners of P1S, X1C or X1E printers who need to replace or stock a control board fan
Not ideal for
Printers outside the P1S, X1C and X1E range
Specifications
| Item Type | Control board fan |
|---|---|
| Compatibility | P1S, X1C, X1E |
| Material | Rubber, Plastic, Metal |
| Speed Rating | 4000 rpm/min |
| Fan Voltage (V) | 5 V |
| Life Cycle | 20000 hrs at 40℃ |
| Color | Black |
| Weight (g) | 25 |
| Shipping Weight | 0.032 kg |
| Shipping Dimensions | 18 × 9 × 4 cm |
What's in the box
- 1 x Bambu Lab Control Board Fan for P1S, X1C and X1E
Frequently Asked Questions
Which printers does this fan fit?
What voltage does the fan run on?
How long is the fan expected to last?
What is included with the purchase?
How much does the fan weigh?
When should I replace the control board fan?
Overview
The Bambu Lab Control Board Fan is a model-specific cooling part for the P1S, X1C and X1E printers. Its job is simple and important: it moves air across the control board so the electronics do not build up heat during long or repeated print jobs. Control boards sit inside an enclosure that is already warm, so a working fan is part of normal thermal management rather than an optional extra.
This fan runs at 5 V and 4000 rpm, weighs 25 g and is supplied in black. Bambu Lab rates its life cycle at 20000 hours at 40°C, which gives you a realistic idea of how long the part is expected to serve in a printer that sees regular use. If your current fan has become noisy, intermittent or has stopped altogether, fitting this unit restores the airflow the board was designed around.
Key Features
- Correct fit for the listed models: designed for the P1S, X1C and X1E, so no adaptation is needed.
- 5 V, 4000 rpm operation: matched to the printer's control board cooling circuit.
- 20000-hour life at 40°C: a rated service life suited to continuous operation in a warm enclosure.
- Light 25 g assembly: minimal mass on the mounting points.
- Mixed construction: rubber, plastic and metal components for a stable, serviceable unit.
Specifications Explained
Voltage and speed
The 5 V rating tells you this fan is intended for a low-voltage control board feed, not a 12 V or 24 V accessory line. The 4000 rpm figure describes how fast the impeller turns; it is a modest, controlled speed chosen for board cooling rather than for high static pressure through a duct.
Life cycle
The 20000-hour figure is measured at 40°C. In practice, that means the fan is rated for a long stretch of everyday printing before replacement is expected, and the temperature reference matters because fan bearings age faster in hotter air.
Weight and dimensions
At 25 g the fan is light enough that vibration and mounting stress stay low. Shipping weight is 0.032 kg and the shipping carton measures 18 × 9 × 4 cm, which is useful to know if you are ordering several small parts at once.
Compatibility and Requirements
This fan is listed for the Bambu Lab P1S, X1C and X1E only. It is not a universal fan and should not be substituted into other printer models. Fitting it assumes you are working on the control board area of one of those three printers and that the existing fan connector and mounting arrangement are being reused as designed. No other accessories are required for installation beyond your usual tools for opening the printer's electronics compartment.
Typical Uses
- Replacing a control board fan that has become noisy or has stopped spinning.
- Restoring cooling after control board maintenance or a board swap.
- Keeping a spare on the shelf so a fan failure does not idle the printer.
- Refreshing the cooling path on a heavily used P1S, X1C or X1E.
What's in the Box
One Bambu Lab Control Board Fan for P1S, X1C and X1E.
Quick specs
- Item Type
- Control board fan
- Compatibility
- P1S, X1C, X1E
- Material
- Rubber, Plastic, Metal
- Speed Rating
- 4000 rpm/min
- Fan Voltage (V)
- 5 V
- Life Cycle
- 20000 hrs at 40℃
















