Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Genuine Bambu Lab power supply for the A1 3D printer, delivering a regulated 24V 4.2A output from 100-240VAC mains. It is a direct replacement unit that keeps your printer running on stable, factory-specified power.

Key Highlights

  • Genuine Bambu Lab unit built to A1 factory specification
  • Wide 100-240VAC input for international mains voltages
  • Regulated 24V output at up to 4.2A
  • Metal housing measuring 125 x 95 mm
  • Direct replacement with no modification required
  • Two mounting screws included in the box

Ideal For

  • Bambu Lab A1 owners replacing a failed power unit
  • A1 users who want a tested spare on the shelf
  • Print farms running long, repeated A1 jobs
  • Anyone servicing an A1 that has lost power
  • Makers in 110V and 220-240V regions alike

Buying Tip

Check the label on your existing A1 power unit and confirm it is the 24V 4.2A version before ordering, and unplug the printer from mains before you begin the swap.

Elecvora expert review

Our verdict

This is the sensible choice when an A1 loses power, because it is the factory-specified part rather than a lookalike. The wide input range and metal housing make it a straightforward, low-risk replacement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine Bambu Lab part matched to the A1
  • 100-240VAC input works across regions
  • Regulated 24V 4.2A output
  • Metal housing with compact 125 x 95 mm footprint
  • Mounting screws included

Cons

  • Listed for the A1 only, not other printers
  • Requires opening the printer and handling mains wiring
  • No warranty period stated in the product data

Best for

A1 owners replacing a failed power unit or holding a spare

Not ideal for

Owners of other Bambu Lab printer models

Specifications

Item TypePower Supply
CompatibilityA1
MaterialMetal
Input Voltage (VAC)100-240
Input current2A
Output Voltage24
Output Current (A)4.2
Length (mm)125
Width (mm)95
Weight (g)313
Shipping Weight0.35 kg
Shipping Dimensions14 × 14 × 4 cm

What's in the box

  • 1 x Bambu Lab Power Supply
  • 2 x Screw

Frequently Asked Questions

Which printer is this power supply compatible with?
It is listed as compatible with the Bambu Lab A1. The product data does not state compatibility with any other model, so it should be fitted only to an A1.
What output does it provide?
The unit outputs 24V at up to 4.2A from an input of 100-240VAC at 2A, matching the power profile the A1 is designed to use.
Will it work in my country?
Yes, the 100-240VAC input range covers the common mains voltages used in the US, UK, EU, Australia, Brazil, Japan and India, so no voltage converter is needed.
What is included with the power supply?
The box contains one Bambu Lab Power Supply and two screws for mounting.
Can I install it myself?
Yes, it is a direct replacement that needs no modification, but the work involves mains wiring inside the printer. Unplug the printer first and follow Bambu Lab's official A1 replacement guide.
How should I store a spare unit?
Keep it in its packaging in a dry place away from moisture and metal debris until you need it, and check the connectors for damage before fitting.

Overview

The Bambu Lab Power Supply compatible with the A1 is the original replacement power unit for the A1 3D printer. It takes mains input anywhere from 100 to 240VAC and converts it into a regulated 24V output at up to 4.2A, which is the power profile the printer was designed around. If your existing unit has failed, or you simply want a tested spare ready to swap in, this is the part that matches the machine rather than a generic substitute.

The housing is made of metal and measures 125 mm long by 95 mm wide, with a unit weight of 313 g. That compact footprint lets it sit in the printer's original power supply position, so installation is a straight replacement rather than a modification project.

Key Features

  • Genuine Bambu Lab part: supplied to the same specification as the unit fitted to the A1 at the factory.
  • Stable output: a regulated 24V rail helps keep printer electronics away from voltage fluctuation.
  • International input range: 100-240VAC at 2A covers the mains voltages used in the US, UK, EU, Australia, Brazil, Japan and India.
  • Metal construction: a rigid housing that protects the internal assembly and mounts securely.
  • Straightforward swap: no cutting, drilling or adapter work needed.

Specifications Explained

Input: 100-240VAC at 2A

The wide input range means the same unit works on 110-120V and 220-240V supplies, so you do not need a voltage converter or a region-specific version.

Output: 24V at 4.2A

The 24V output is the working voltage the A1 expects, and the 4.2A current ceiling is the rated capacity of the supply. Matching both figures to the printer is what keeps operation consistent during long jobs.

Size and weight

At 125 x 95 mm and 313 g, the unit is compact enough for the printer's own enclosure. Shipping weight is 0.35 kg and the packed dimensions are 14 x 14 x 4 cm, which keeps freight simple and predictable.

Compatibility and Requirements

This power supply is listed as compatible with the Bambu Lab A1. It is not stated as compatible with other printer models, so fit it only to an A1. Installation requires access to mains wiring inside the printer, so work with the printer unplugged and follow the official replacement guide for the A1.

Typical Uses

  • Replacing a power supply that has stopped delivering output.
  • Restoring an A1 that has been out of service due to a power fault.
  • Keeping a spare on the shelf so a failed unit does not stall a print schedule.
  • Servicing a printer used for long, repeated print sessions.

What's in the Box

  • 1 x Bambu Lab Power Supply
  • 2 x Screw

Quick specs

Item Type
Power Supply
Compatibility
A1
Material
Metal
Input Voltage (VAC)
100-240
Input current
2A
Output Voltage
24
See all specifications