Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by BIGTREETECH, this other esp wifi modules is a good fit for makers, students and electronics hobbyists. Main specs: item type WiFi Module; based on ESP8266 Based; compatibility SKR Octopus Control Board. Check that your power source supplies 3.0 ~ 3.6v before connecting it.

Key Highlights

  • Item Type: WiFi Module
  • Based On: ESP8266 Based
  • Compatibility: SKR Octopus Control Board

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeWiFi Module
Based OnESP8266 Based
CompatibilitySKR Octopus Control Board
Product NameESP-01S WIFI Module
Operating Voltage (V)3.0 ~ 3.6v
Data InterfaceUART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
Working Current (mA)average 80mA
Wireless Standard802.11 b / g / n
Frequency2.4GHz~2.5GHz(2400M ~ 2483.5M)
Operating Temperature (°C)40 degrees to 125 degrees
Network ProtocolIPV4, TCP / UDP / HTTP / FTP
Security MechanismWPA / WPA2
Length (mm)25
Width (mm)15
Weight (g)5
Shipping Weight0.012 kg
Shipping Dimensions4.5 × 5.5 × 3 cm

Overview

The BIGTREETECH BTT ESP-01S WIFI Module ESP8266 for SKR Octopus Control Board, made by BIGTREETECH, is listed in our other esp wifi modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: WiFi Module (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Based On: ESP8266 Based
  • Compatibility: SKR Octopus Control Board
  • Product Name: ESP-01S WIFI Module (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Operating Voltage (V): 3.0 ~ 3.6v (match this to your power supply; too high a voltage can damage the part)
  • Data Interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM (confirm your cable or board uses the same connector)
  • Working Current (mA): average 80mA (your supply must deliver at least this much current)
  • Wireless Standard: 802.11 b / g / n

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a BIGTEETECH ESP-01S WIFI Module ESP8266 for SKR Octopus Control Board. ESP-01S  WIFI Module BIGTREETECH ESP8266 is a highly integrated chip and with the pre-flashed AT firmware, you can control the module through UART AT commands easily. The module integrates MCU inside, supports other developments like Lua/ Micro python/ Arduino to achieve flexible and fast prototyping, make it easy to integrate the module into IoT applications. This BIGTEETECH ESP-01S WIFI Module ESP8266 wireless module is designed to provide your device with a reliable and secure connection to Wi-Fi networks. It features an ESP8266 chip that supports 802.11 b/g/n standards and can reach speeds of up to 150 Mbps. The module also supports multiple security protocols, including WPA/WPA2, WEP, and WPA-PSK/WPA2-PSK. With its small size and low power consumption, this module is an ideal choice for your BIGTREETECH SKR Pro or TFT35.

Features:

  1. BIGTREETECH ESP8266 is a highly integrated chip
  2. An ESP8266 chip that supports 802.11 b/g/n standards
  3. Supports multiple security protocols
  4. Small size
  5. An ideal choice for your BIGTREETECH SKR Pro or TFT35

Package Includes:

1 x BIGTEETECH ESP-01S WIFI Module ESP8266 for SKR Octopus Control Board

Quick specs

Item Type
WiFi Module
Based On
ESP8266 Based
Compatibility
SKR Octopus Control Board
Product Name
ESP-01S WIFI Module
Operating Voltage (V)
3.0 ~ 3.6v
Data Interface
UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
See all specifications