
1 / 2 · Click to enlarge
At a glance
Made by BIGTREETECH, this 3d printer extruder parts and fans is a good fit for 3D printing users. Main specs: item type Expansion Board; compatibility 36/42 stepper motor extruder, Klipper expansion; material Metal, HQ Plastic. Check that your power source supplies 12 to 24 before connecting it.
Key Highlights
- Item Type: Expansion Board
- Compatibility: 36/42 stepper motor extruder, Klipper expansion
- Material: Metal, HQ Plastic
Ideal For
- Upgrading or repairing a 3D printer
- Spare parts for long prints
- Testing new materials
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Expansion Board |
|---|---|
| Compatibility | 36/42 stepper motor extruder, Klipper expansion |
| Material | Metal, HQ Plastic |
| Input Voltage (VDC) | 12 to 24 |
| Logic Voltage (V) | DC 3.3V |
| Driver | TMC2209 |
| Sensor | ADXL345 |
| Input current | 9 |
| Maximum Output Current (A) | 5 |
| USB | Type-C |
| Length (mm) | 55 |
| Width (mm) | 40 |
| Weight (g) | 13 |
| Color | Black PCB |
| Shipping Weight | 0.043 kg |
| Shipping Dimensions | 10 × 5.5 × 3.5 cm |
Overview
The BIGTREETECH BTT EBB36 CAN V1.2 Expansion Board, made by BIGTREETECH, is listed in our 3d printer extruder parts and fans range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Expansion Board
- Compatibility: 36/42 stepper motor extruder, Klipper expansion
- Material: Metal, HQ Plastic (affects weight, heat handling and how the part wears)
- Input Voltage (VDC): 12 to 24 (match this to your power supply; too high a voltage can damage the part)
- Logic Voltage (V): DC 3.3V (match this to your power supply; too high a voltage can damage the part)
- Driver: TMC2209
- Sensor: ADXL345
- Input current: 9 (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features :
- With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
- Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from the heating rod.
- Users can select the thermistor's pull-up resistor values through a jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY.
- Connect the USB with a jumper cap to get it powered on, which effectively isolates the main control board DC-DC from USB 5V.
- Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions.
- Added anti-flyback diodes on the heating rod and fans' ports effectively protect the MOS tube from being burned due to reverse voltage.
- Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connecting the reverse power line during DIY.
- Onboard MAX31865 supports selecting 2-wire or 4-wire of PT100/ PT1000.
- Supports communication via CAN or USB. The terminal resistor 120R of CAN can be selected through the jumper cap, and it reserves CAN expansion interfaces.
- Equipped ESD protection chip on the USB port prevents the main control board from being broken down by the static electricity of the USB port.
- The adaptor board is equipped with terminals, female reeds, double-way studs and screws, which are required for DIY, greatly meeting the DIY needs of customers.
Package Includes :
1 x BIGTREETECH BTT EBB36 CAN V1.2 Expansion Board 1 x Product AccessoriesQuick specs
- Item Type
- Expansion Board
- Compatibility
- 36/42 stepper motor extruder, Klipper expansion
- Material
- Metal, HQ Plastic
- Input Voltage (VDC)
- 12 to 24
- Logic Voltage (V)
- DC 3.3V
- Driver
- TMC2209


















