
1 / 5 · Click to enlarge
AI Summary
A 32-bit 3D printer mainboard built on the 480MHz STM32H743VIT6 with 12-24V input and dual EZ/TMC driver sockets. Its fast MCU and BOOT button make firmware updates and advanced features like Klipper or Marlin easier to run.
Key Highlights
- 32-bit STM32H743VIT6 ARM Cortex-M7 MCU running at 480MHz
- Accepts 12-24V DC input via TPS5450 5A regulator
- Dual driver sockets for EZ series and TMC series modules
- Firmware support for Marlin, Klipper and RepRapFirmware
- BOOT button enables DFU bootloader updates
- Thermistor protection circuit helps guard the main chip
Ideal For
- Makers building a custom 3D printer from scratch
- Hobbyists upgrading an older 8-bit board to 32-bit control
- Users who want to run Klipper or RRF with flexible driver options
- Printers planning to add BLTouch, runout sensing or RGB lighting
- Anyone replacing a failed controller board in an existing printer
Buying Tip
Confirm your power supply is 12V or 24V DC and decide whether you will use EZ series or TMC series drivers before ordering, since the board supports both but ships as a bare mainboard.
Elecvora expert review
Our verdict
The SKR 3 EZ pairs a genuinely fast STM32H743VIT6 with dual driver sockets, making it a versatile foundation for modern 3D printer builds. It is a sensible upgrade for users who want 32-bit performance without committing to a single driver ecosystem.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 480MHz STM32H743VIT6 offers strong processing headroom
- Accepts both EZ series and TMC series driver modules
- Supports Marlin, Klipper and RRF firmware
- TPS5450 5A regulator and 12-24V input range
- BOOT button enables DFU bootloader updates
Cons
- Does not work with the TFT35 SPI V2.1 display
- Sold as a bare mainboard, so drivers and accessories are separate
- WiFi modules are not included
Best for
Makers building or upgrading a 3D printer who want a fast 32-bit board with flexible driver options
Not ideal for
Users who need a display-ready bundle or want a board with drivers pre-installed
Specifications
| Item Type | Controller Board |
|---|---|
| Compatibility | EZ Specific Driver Series, TMC Specific Driver Series |
| Input Voltage (VDC) | 12–24 |
| Microcontroller | STM32H743VIT6 |
| MCU Type | STM32H743VIT6, 480MHz |
| Power Regulator | TPS5450, 5A |
| Firmware Compatible | Kipper, RRF, Marlin |
| New EZ socket (Y/N) | Y |
| Length (mm) | 108 |
| Width (mm) | 96 |
| Weight (g) | 116 |
| Shipping Weight | 0.28 kg |
| Shipping Dimensions | 13.5 × 12 × 5.5 cm |
What's in the box
- 1 x BIGTREETECH BTT SKR 3 EZ Control Board Mainboard for 3D Printer
- Accessories as shown in the product image
Frequently Asked Questions
What microcontroller does the SKR 3 EZ use?
Which driver modules are compatible?
What input voltage does the board require?
Which firmware can I run?
Which displays work with this board?
What is included in the package?
Overview
The BIGTREETECH BTT SKR 3 EZ is a 32-bit control board for 3D printers, designed as an evolution of the SKR 3 platform with sockets that accept both EZ series and TMC series driver modules. At its centre is the STM32H743VIT6, an ARM Cortex-M7 microcontroller running at 480MHz, which gives the board the processing headroom needed for modern firmware and feature-rich print setups.
Power is handled by a TPS5450 regulator rated at 5A, and the board accepts a 12-24V DC input. Measuring 108 x 96mm and weighing 116g, it fits common printer frames and enclosures while keeping wiring accessible.
Key Features
- Fast 32-bit processing: the STM32H743VIT6 at 480MHz supports responsive motion control and advanced firmware features.
- Flexible driver options: two socket types let you use EZ series or TMC series driver modules.
- Wide input range: 12-24V DC input suits many common printer power configurations.
- Strong 5A regulator: the TPS5450 power chip supplies the board and connected accessories.
- Firmware choice: compatible with Marlin, Klipper and RRF.
- DFU bootloader access: a reserved BOOT button allows bootloader updates over DFU.
- Thermistor protection: added protection circuitry helps prevent main chip damage from leakage in the heated bed or hotend circuit.
- Feature support: resume printing, filament runout detection, completed shutdown, BLTouch, RGB lights and a general WiFi module interface.
Specifications Explained
The microcontroller is the heart of any control board, and the 480MHz STM32H743VIT6 places this board in the high-performance tier. That matters when you enable features such as input shaping, runout detection or RGB lighting while keeping motion smooth.
The 12-24V input range means the board can be used with either a 12V or 24V printer power supply, so check that your PSU matches your steppers, fans and heaters. The TPS5450 regulator is rated at 5A, which covers the board's own logic supply and attached low-power accessories.
Two driver socket types are the standout detail: the board accepts EZ series modules and TMC series modules, so you can choose drivers that match your noise, current and feature requirements without changing the mainboard.
Compatibility and Requirements
The SKR 3 EZ works with EZ specific driver series and TMC specific driver series modules. It is compatible with Marlin, Klipper and RRF firmware. For displays, it works with TFT serial screens and mini12864 screens, but it does not work with the TFT35 SPI V2.1. A WiFi module interface is provided for ESP-12S, ESP-07 and ESP32 modules. Refer to the manual in the attachments section for detailed wiring and configuration information.
Typical Uses
This board suits makers building a new 3D printer from scratch, hobbyists upgrading an older 8-bit board to 32-bit control, and users who want to experiment with Klipper or RRF while retaining the option of EZ or TMC drivers. It is also a reasonable choice for anyone planning to add BLTouch, filament runout sensing or RGB lighting.
What's in the Box
The package includes one BIGTREETECH BTT SKR 3 EZ control board mainboard for 3D printers, along with accessories as shown in the product image.
Quick specs
- Item Type
- Controller Board
- Compatibility
- EZ Specific Driver Series, TMC Specific Driver Series
- Input Voltage (VDC)
- 12–24
- Microcontroller
- STM32H743VIT6
- MCU Type
- STM32H743VIT6, 480MHz
- Power Regulator
- TPS5450, 5A


















