Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact USB-C sensor that measures 0 to 100% transmission distance and hex color on 1.75mm filament. Its OLED screen shows readings instantly, standalone or connected to HueForge.

Key Highlights

  • Measures filament transmission distance across a 0 to 100% sensing range
  • Captures hex color codes for digital design and color matching
  • Onboard OLED display shows real-time measurement feedback
  • USB-C powered at 5 VDC for universal cable compatibility
  • Quick Capture and Continuous Capture modes for still or live readings
  • Compact 54.5 x 21.6 mm body weighing only 23 g

Ideal For

  • HueForge users tuning transmission distance for color-blending prints
  • Designers building lamps and light-diffusion projects
  • Makers comparing filament batches for consistent color
  • 3D printing enthusiasts who want measured material data
  • Workshops documenting filament color codes for repeat jobs

Buying Tip

Check that your filament is 1.75 mm before measuring, and keep a USB-C power source nearby since the sensor runs on 5 VDC over USB.

Elecvora expert review

Our verdict

The TD1s is a focused measuring tool that turns filament clarity and color into usable numbers rather than guesswork. It is compact, USB-C powered and readable at a glance, which makes it easy to fit into an existing printing routine.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct TD readings from 0 to 100% on an onboard OLED
  • Captures hex color codes for design reuse
  • Two capture modes cover both one-off and live measurement
  • Small 23 g body with USB-C power

Cons

  • Limited to 1.75 mm filament samples
  • Requires a separate USB power source
  • Software compatibility is limited to what is stated, such as HueForge workflows

Best for

HueForge and color-blending users who need measured TD and color data

Not ideal for

Printers running filament sizes other than 1.75 mm

Specifications

Item Type3D Printer Accessory, Color and TD Sensor
Sensing range0 to 100%
Filament Diameter1.75
Length (mm)54.5
Width (mm)21.6
Model No. / NameTD1s
Weight (g)23
Operating Voltage (VDC)5
Shipping Weight0.06 kg
Shipping Dimensions13 × 7 × 3 cm

What's in the box

  • 1 x BIGTREETECH TD1s V1.0 Color and TD Sensor
  • 1 x USB Cable

Frequently Asked Questions

What does the TD1s actually measure?
It measures the transmission distance of 1.75 mm filament across a 0 to 100% range and captures hex color codes. Both values appear on the onboard OLED display.
Can I use it without a computer?
Yes. The sensor works standalone with its OLED display and USB-C power. You can also connect it to a computer for use with HueForge and similar workflows.
What power does it need?
The unit operates at 5 VDC over USB-C. The included USB cable connects it to a suitable USB power source.
What filament size does it support?
It is designed for 1.75 mm filament, which matches the stated filament diameter in the specifications.
What is the difference between Quick Capture and Continuous Capture?
Quick Capture registers a filament sample instantly for a single reading. Continuous Capture tracks live TD values, which is useful when monitoring changes during use.
What comes in the package?
The box contains one BIGTREETECH TD1s V1.0 Color and TD Sensor and one USB cable. No other accessories are listed.

Overview

The BIGTREETECH TD1s V1.0 is a dedicated color and transmission distance sensor for 3D printing. Transmission distance, or TD, describes how much light passes through a filament sample, and that value directly affects how translucent or opaque a printed layer appears. Instead of guessing, the TD1s measures the filament and reports the result on its built-in OLED display.

At 54.5 mm long, 21.6 mm wide and just 23 g, it takes up little space on a desk or beside a printer. Power comes through USB-C at 5 VDC, so a common cable and port are all you need to get readings.

Key Features

  • TD measurement: Reads transmission distance from 0 to 100%, giving you a concrete number for material clarity.
  • Color capture: Records hex color codes so the same shade can be reused in digital design work.
  • OLED feedback: The display shows measurements in real time, so no separate screen or app is required for a basic reading.
  • Two capture modes: Quick Capture registers a filament sample immediately, while Continuous Capture tracks live TD values.
  • Flexible workflow: Use it on its own or connect it to a computer for software-assisted work.

Specifications Explained

The 0 to 100% sensing range covers the full span of transmission values you are likely to encounter, from nearly opaque to highly translucent filament. The 1.75 mm filament diameter figure confirms the sample size the sensor is built around, which is the most common desktop printing format.

Its 5 VDC operating voltage matches standard USB power, and the USB-C connection keeps cabling simple. The 23 g weight and compact dimensions make the unit easy to store and carry between workstations.

Compatibility and Requirements

The TD1s is designed for 1.75 mm filament and requires a 5 VDC USB-C power source. It can operate as a standalone measuring device or be connected to a computer for use with HueForge and comparable color workflows. No other hardware requirements are specified.

Typical Uses

  • Checking TD before starting a HueForge or color-blending print.
  • Selecting filament for lamps, light boxes and other diffusion projects.
  • Logging hex color codes for design files and repeat orders.
  • Comparing spools from different batches for consistent results.

What's in the Box

  • 1 x BIGTREETECH TD1s V1.0 Color and TD Sensor
  • 1 x USB Cable

Quick specs

Item Type
3D Printer Accessory, Color and TD Sensor
Sensing range
0 to 100%
Filament Diameter
1.75
Length (mm)
54.5
Width (mm)
21.6
Model No. / Name
TD1s
See all specifications