Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by BIGTREETECH, this other esp wifi modules is a good fit for makers, students and electronics hobbyists. Main specs: item type WiFi Module; based on ESP8266 Based; compatibility SKR 2 Octopus V1.1 Motherboard.

Key Highlights

  • Item Type: WiFi Module
  • Based On: ESP8266 Based
  • Compatibility: SKR 2 Octopus V1.1 Motherboard

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeWiFi Module
Based OnESP8266 Based
CompatibilitySKR 2 Octopus V1.1 Motherboard
Module802.11b/g/n Wi-Fi SOC
Clock SpeedUp to 160 MHz
SupportedUART/GPIO/IIC/PWM/ADC
Shipping Weight0.015 kg
Shipping Dimensions5.5 × 4.5 × 3 cm

Overview

The BIGTREETECH BTT ESP8266 WiFi Transceiver Module ESP12S ESP-07 for SKR 2 Octopus V1.1 Motherboard, made by BIGTREETECH, is listed in our other esp wifi modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: WiFi Module (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Based On: ESP8266 Based
  • Compatibility: SKR 2 Octopus V1.1 Motherboard
  • Module: 802.11b/g/n Wi-Fi SOC (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Clock Speed: Up to 160 MHz (make sure the rest of your system works at this frequency)
  • Supported: UART/GPIO/IIC/PWM/ADC (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5.5 × 4.5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a BIGTREETECH ESP8266 WiFi Transceiver Module ESP12S ESP-07 Serial Wireless DIY Accessories for SKR 2 Octopus V1.1 Motherboard. A wireless router is equipped with a wired cable to easily connect the wi-fi device to your computer, and it can also be used as a Bluetooth speaker. you will see the octopus connection point through the connectors and ports, which makes it easier to connect your devices. The ESP8266 is a high-performance wireless SOC that offers maximum utility at the lowest cost and unlimited possibilities for embedding Wi-Fi functionality into other systems

The ESP-12S Wi-Fi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in a small package with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA. The ESP-12S Wi-Fi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers.

Note: The actual product may vary in terms of color and markings. Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.


Features:

  1. Suitable for all kinds of led strip
  2. The circuit board adopts high quality chips
  3. The smallest 802.11b/g/n Wi-Fi SOC module
  4. Up to 160MHz clock speed
  5. Low power 32-bit CPU, can also serve as the application processor

Package Includes:

1 x BIGTREETECH ESP8266 WiFi Transceiver Module ESP12S ESP-07 for SKR 2 Octopus V1.1 Motherboard

Quick specs

Item Type
WiFi Module
Based On
ESP8266 Based
Compatibility
SKR 2 Octopus V1.1 Motherboard
Module
802.11b/g/n Wi-Fi SOC
Clock Speed
Up to 160 MHz
Supported
UART/GPIO/IIC/PWM/ADC
See all specifications