
1 / 2 · Click to enlarge
At a glance
Made by BIQU, this bambu lab 3d printer parts is a good fit for 3D printing users. Main specs: shipping weight 0.580 kg.
Key Highlights
- Shipping Weight: 0.580 kg
Ideal For
- Upgrading or repairing a 3D printer
- Spare parts for long prints
- Testing new materials
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Shipping Weight | 0.580 kg |
|---|---|
| Shipping Dimensions | 21 × 14 × 12 cm |
Overview
The BIQU BMCU-370 Hall Version DIY Kit, made by BIQU, is listed in our bambu lab 3d printer parts range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.580 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 21 × 14 × 12 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The BIQU BMCU-370 Hall Version DIY Kit is a comprehensive multi-color filament feeding solution for makers who prefer assembling and customizing their own automatic filament management system. Equipped with a powerful 370 Hall sensor motor, it delivers smooth and precise filament feeding while supporting up to four filament channels for automatic multi-color and multi-material printing.
The open-source design provides excellent compatibility with Bambu Lab A1, A1 Mini, P1P, and P1S printers, along with continuous firmware improvements from the community. Featuring durable ABS construction, a filament buffer, and rewind components, the DIY kit offers reliable performance, easy maintenance, and a cost-effective upgrade for advanced 3D printing projects.
Note: The BIQU BMCU-370 Mainboard is not included with this DIY Kit and must be purchased separately if required.

Features:
- Supports automatic feeding for up to 4 filament channels
- High-performance 370 Hall sensor motor for precise filament control
- Open-source design with continuous firmware updates
- Compatible with Bambu Lab A1, A1 Mini, P1P, and P1S
- DIY kit allows custom assembly and easy maintenance
- Includes rewind components for improved filament management
Specifiactions:
- Product Type: Multi-Color Filament Feeding System DIY Kit
- Model: BMCU-370
- Version: Hall Version DIY Kit
- Compatible Models: Bambu Lab A1, A1 Mini, P1P, P1S
- Number of Supported Materials: 4 Channels
- Motor Type: 370 Hall Sensor Motor
- Sensor Type: Hall Sensor
- Operating Voltage: 24V DC
- Communication Interface: 4-Pin
- Housing Material: ABS
- Operating Temperature: 0°C to 40°C
- Filament Buffer: Supported
- Rewind Components: Included
- Assembly Type: DIY (Self Assembly)
- Firmware Support: Official & Community Updates
Package Includes:
1 x BIQU BMCU-370 Hall Version DIY Kit
Kit Includes:
70 x M2 × 8 Screws
2 x M3 × 8 Screws
5 x M3 × 14 Screws
5 x M3 × 5 Screws
5 x 0.3 × 4 × 5mm Springs
5 x 0.6 × 4 × 10mm Springs
8 x 0.8 × 12 × 25mm Springs
5 x D5 Steel Balls
5 x M3 Hex Nuts
8 x Bearings
8 x Pneumatic Connectors
12 x D2 × 20 Locating Pins
4 x D5 × 22 Locating Pins
9 x N35 Magnets
5 x D6 × 1.5mm Radial Magnets
5 x 682A Worm Gears
24 x 62B Shaft Sleeves
9 x 182A Gears
4 Sets x Bearing Kits
4 x Extruder Sub-Boards
1 x BMCU-370 Mainboard
4 x RS370 Motors
1 x Power Signal Cable
1 x PTFE Tube
4 x 15-Pin Connection Cables
4 x Wave Washers
4 x Left-Hand Torsion Springs
4 x RS370 Motor Connection Cables (Red & White, 8 Wires Total)



















