Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The BIQU Snapmaker U1 Glacier Build Plate is a 270×270mm double-sided, fine-textured surface with 7-layer composite construction for strong adhesion at lower bed temperatures. Its flexible high-magnetic spring steel base makes print removal easy and extends plate life.

Key Highlights

  • Designed specifically for the Snapmaker U1 3D printer
  • 270 × 270mm print area matches the U1 build volume
  • Double-sided 7-layer composite with fine-textured Glacier surface
  • High-magnetic spring steel base for consistent adhesion
  • Supports PLA, PETG, ABS, PA and other filaments below 300°C
  • Scratch-resistant, self-recovering coating for long-term use

Ideal For

  • Snapmaker U1 owners wanting a spare or replacement build plate
  • Makers printing PLA and PETG at lower bed temperatures
  • Users who prefer glue-free adhesion and easy print release
  • Operators running ABS, PA, and other engineering filaments below 300°C
  • Print farms looking for a durable double-sided surface

Buying Tip

Check that your Snapmaker U1 has a magnetic bed base, since this spring steel plate relies on it to stay in place.

Elecvora expert review

Our verdict

The BIQU Glacier plate is a well-considered upgrade for Snapmaker U1 users who want reliable adhesion without glue and at lower bed temperatures. Its double-sided 7-layer construction and flexible steel base make daily printing and part removal straightforward.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Printer-specific 270 × 270mm fit for the Snapmaker U1
  • Strong adhesion at lower PLA and PETG bed temperatures
  • Double-sided surface extends usable life
  • Flexible spring steel simplifies print removal
  • Scratch-resistant, self-recovering coating

Cons

  • Requires a magnetic bed base to hold the plate
  • Not intended for nozzle temperatures at or above 300°C
  • Fine texture may leave a subtle matte finish on bottom surfaces

Best for

Snapmaker U1 owners printing PLA, PETG, ABS, and PA who want glue-free adhesion and easy release.

Not ideal for

Printers other than the Snapmaker U1 or filaments requiring nozzle temperatures of 300°C and above.

Specifications

Shipping Weight0.326 kg
Shipping Dimensions28 × 28 × 3 cm

What's in the box

  • 1 × BIQU Snapmaker U1 Glacier Build Plate 270 × 270mm (Fine Texture)

Frequently Asked Questions

Which printer is this build plate compatible with?
It is designed specifically for the Snapmaker U1 3D printer. The 270 × 270mm print area matches the U1 build volume.
Do I need to use glue with this plate?
No, glue is not required. The Glacier fine-texture surface is designed to provide adhesion on its own when bed temperatures are set correctly.
What bed temperatures should I use?
Recommended settings are 45–55°C for PLA, 60–75°C for PETG, and 100°C for ABS. Keep nozzle temperature below 300°C.
How do I clean the plate?
Clean it with water and soap or alcohol. Wipe the surface and let it dry fully before printing again.
Is the plate double-sided?
Yes, both sides are usable, which helps extend the practical service life of the plate.
What is included in the package?
The package includes one BIQU Snapmaker U1 Glacier Build Plate 270 × 270mm (Fine Texture).

Overview

The BIQU Snapmaker U1 Glacier Build Plate is a replacement build surface made for the Snapmaker U1. It measures 270 × 270mm, matching the printer's build area, and uses a double-sided 7-layer composite construction over a high-magnetic spring steel base. The fine-textured Glacier surface is designed to grip prints firmly while allowing lower bed temperatures, which can reduce energy consumption and help limit warping on larger parts.

Key Features

  • Printer-specific fit: Sized for the Snapmaker U1, so no trimming or adapters are needed.
  • Fine-texture Glacier surface: Provides strong adhesion with a subtle textured finish on both sides.
  • 7-layer composite: Multiple layers work together for consistent gripping performance.
  • Double-sided design: Both faces are usable, effectively doubling the plate's service life.
  • Low-temperature printing: Recommended bed temperatures are 45–55°C for PLA and 60–75°C for PETG.
  • Flexible spring steel: The magnetic steel base flexes to release prints once cooled.
  • Durable coating: Scratch-resistant and self-recovering for repeated use.

Specifications Explained

The 270 × 270mm print size is the usable area, while the overall plate measures 276 × 301mm to fit the U1's bed carriage. The 7-layer composite refers to the bonded surface stack that delivers adhesion and durability. High-magnetic spring steel means the plate holds securely on the magnetic bed and can be flexed for part removal. Nozzle temperature compatibility is below 300°C, and the plate is compatible with PLA, PETG, ABS, PA, and other engineering materials. For ABS, a bed temperature of 100°C is recommended. Cleaning with water and soap or alcohol is sufficient, and no glue is required for normal use.

Compatibility and Requirements

This build plate is designed for the Snapmaker U1 3D printer. It supports filaments that print with nozzle temperatures below 300°C, including PLA, PETG, ABS, and PA. Recommended bed temperatures are 45–55°C for PLA, 60–75°C for PETG, and 100°C for ABS. The plate requires a magnetic bed base on the printer to hold the spring steel sheet. No glue is needed for adhesion.

Typical Uses

Use this plate for everyday printing on the Snapmaker U1, from PLA prototypes and PETG functional parts to ABS and PA engineering components. The fine texture leaves a subtle matte finish on the bottom of prints. The double-sided design lets you rotate the plate when one side shows wear, and the low-temperature adhesion helps with energy-conscious workflows and large, flat parts prone to warping.

What's in the Box

  • 1 × BIQU Snapmaker U1 Glacier Build Plate 270 × 270mm (Fine Texture)

Quick specs

Shipping Weight
0.326 kg
Shipping Dimensions
28 × 28 × 3 cm
See all specifications