
1 / 3 · Click to enlarge
At a glance
Made by BOTLAB DYNAMICS, this drone gps gnss modules and antennas is a good fit for makers, students and electronics hobbyists. Main specs: gnss Receiver: u-blox M10; supported systems GPS, GLONASS, BDS, Galileo, SBAS, QZSS; compass LIS3MDLTR (3-axis magnetometer). Check that your power source supplies 3.3 – 5 before connecting it.
Key Highlights
- GNSS: Receiver: u-blox M10
- Supported systems: GPS, GLONASS, BDS, Galileo, SBAS, QZSS
- Compass: LIS3MDLTR (3-axis magnetometer)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| GNSS | Receiver: u-blox M10 |
|---|---|
| Supported systems | GPS, GLONASS, BDS, Galileo, SBAS, QZSS |
| Compass | LIS3MDLTR (3-axis magnetometer) |
| Operating Voltage (V) | 3.3 – 5 |
| Baud Rate (bps) | 115200 bps |
| Interface | UART ,I2C |
| Compatibility | BetaFlight, iNav, ArduPilot |
| Sensor Type | Strain Gauge Based Load Cell |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.024 kg |
| Shipping Dimensions | 13 × 10 × 3 cm |
Overview
The BotNavigator GNSS V1 Module, made by BOTLAB DYNAMICS, is listed in our drone gps gnss modules and antennas range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- GNSS: Receiver: u-blox M10
- Supported systems: GPS, GLONASS, BDS, Galileo, SBAS, QZSS (confirm your cable or board uses the same connector)
- Compass: LIS3MDLTR (3-axis magnetometer)
- Operating Voltage (V): 3.3 – 5 (match this to your power supply; too high a voltage can damage the part)
- Baud Rate (bps): 115200 bps
- Interface: UART ,I2C (confirm your cable or board uses the same connector)
- Compatibility: BetaFlight, iNav, ArduPilot
- Sensor Type: Strain Gauge Based Load Cell
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The BotNavigator GNSS Module is a compact and high-performance navigation module designed for UAVs, drones, and autonomous systems. Powered by the advanced u-blox M10 receiver, it supports multiple global satellite systems including GPS, GLONASS, BDS, Galileo, SBAS, and QZSS for accurate and reliable positioning worldwide.
GNSS Module is equipped with a built-in LIS3MDLTR compass and a high-sensitivity ceramic antenna, it ensures precise heading and strong signal reception even in challenging environments. Its ultra-compact 25×25 mm design makes it perfect for space-constrained drone builds, while the plug-and-play interface allows easy integration with popular flight controllers.
With fast satellite acquisition, A-GPS support, and compatibility with firmware like BetaFlight, iNav, and ArduPilot, this module is an ideal co-pilot for precision navigation and autonomous missions.
Features:
- Powered by u-blox M10 GNSS receiver for superior accuracy
- Supports 7 global satellite systems for worldwide coverage
- Built-in LIS3MDLTR compass for precise heading data
- High-sensitivity ceramic antenna for strong signal reception
- Fast satellite lock with A-GPS and quick reconnection
- Compact 25×25 mm lightweight design for UAV applications
- Plug-and-play with UART & I2C interfaces
- Compatible with BetaFlight, iNav, and ArduPilot firmware
- Integrated SAW filter for reduced signal interference
Package Includes:
1 x BotNavigator GNSS V1 ModuleQuick specs
- GNSS
- Receiver: u-blox M10
- Supported systems
- GPS, GLONASS, BDS, Galileo, SBAS, QZSS
- Compass
- LIS3MDLTR (3-axis magnetometer)
- Operating Voltage (V)
- 3.3 – 5
- Baud Rate (bps)
- 115200 bps
- Interface
- UART ,I2C



















