
1 / 3 · Click to enlarge
At a glance
Made by BOTLAB DYNAMICS, this drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: item type Flight Controller; model no. / name F722; sensor IMU (Gyro + Accelerometer) – ICM42688P. Check that your power source supplies 3S to 6S LiPo before connecting it.
Key Highlights
- Item Type: Flight Controller
- Model No. / Name: F722
- Sensor: IMU (Gyro + Accelerometer) – ICM42688P
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Flight Controller |
|---|---|
| Model No. / Name | F722 |
| Sensor | IMU (Gyro + Accelerometer) – ICM42688P |
| Main control (MCU) | STM32F722 |
| OSD | AT7456E |
| Blackbox | 32MB Winbond Flash |
| Motor Output | 4 |
| Mounting Hole PCD (mm) | 30.5mm x 30.5mm |
| Input Voltage | 3S to 6S LiPo |
| USB Port | Type-C |
| Plug Type | 6-pin DJI Air Unit Port |
| Length (mm) | 30.5 |
| Width (mm) | 30.5 |
| Weight (g) | 10 |
| Shipping Weight | 0.133 kg |
| Shipping Dimensions | 9.5 × 9.5 × 6 cm |
Overview
The BotWing F722 Flight Controller (Fully Solderless Design), made by BOTLAB DYNAMICS, is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Flight Controller
- Model No. / Name: F722
- Sensor: IMU (Gyro + Accelerometer) – ICM42688P (space for firmware, files or media)
- Main control (MCU): STM32F722 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- OSD: AT7456E
- Blackbox: 32MB Winbond Flash (space for firmware, files or media)
- Motor Output: 4
- Mounting Hole PCD (mm): 30.5mm x 30.5mm
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The BotWing F722 Flight Controller is a high-performance, solderless FC built for modern FPV and autonomous drone setups. It supports Betaflight and iNav, and features the powerful STM32F722 MCU with the precision ICM42688P IMU. With a plug-and-play design, integrated OSD (AT7456E), 32MB Blackbox, 6 UARTs, and 3–6S LiPo support, it offers unmatched flexibility for both freestyle and mission-based drones.
The controller supports 4 motors and 2 servos, DJI Air Unit plug, LED strips, ESC telemetry, and camera control. Designed with convenience and reliability in mind, it includes DFU boot mode, Type-C USB, and well-labeled pads for easy configuration.
Features:
- STM32F722 MCU for advanced processing
- Fully solderless design – quick and clean installs
- ICM42688P IMU for accurate flight stabilization
- Supports Betaflight and iNav firmware
- Onboard AT7456E OSD and 32MB Blackbox
- DJI Air Unit 6-pin plug & play port
- 4 motor + 2 servo outputs for flexible setups
- 6 total UARTs for GPS, VTX, RX, Camera, ESC, etc.
Package Includes:
1 x BotWing F722 Flight Controller
10 x Connector Cable
6 x M3 rubber Grommet
1 x Silicon USB protector
Quick specs
- Item Type
- Flight Controller
- Model No. / Name
- F722
- Sensor
- IMU (Gyro + Accelerometer) – ICM42688P
- Main control (MCU)
- STM32F722
- OSD
- AT7456E
- Blackbox
- 32MB Winbond Flash



















