Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Bourns 3386P is a 10k Ohm through-hole trimmer potentiometer for precise PCB adjustments. Its single-turn design and ±10% tolerance make it a reliable choice for calibration and preset tuning.

Key Highlights

  • 10k Ohm resistance with ±10% tolerance for predictable circuit settings
  • Single-turn adjustment via standard screwdriver for quick calibration
  • Through-hole mounting for secure PCB installation
  • Wide operating temperature range of -55°C to 125°C
  • Compact 9.5mm × 9.5mm body fits tight board layouts
  • Low weight of approximately 0.1g per unit

Ideal For

  • Electronics hobbyists building or modifying PCBs
  • Repair technicians replacing worn trimmers
  • Design engineers needing a preset resistor for calibration
  • Students learning about through-hole components
  • Makers working on audio or sensor circuits

Buying Tip

Check that your PCB has through-hole pads spaced for this trimmer and that you have a small screwdriver for adjustment.

Elecvora expert review

Our verdict

A dependable single-turn trimpot from a well-known manufacturer, offering straightforward through-hole mounting and a useful 10k Ohm value. It is a solid choice for general calibration tasks where multi-turn precision is not required.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Well-known Bourns quality
  • Easy screwdriver adjustment
  • Wide operating temperature range
  • Compact size for tight boards

Cons

  • Single-turn design offers less precision than multi-turn types
  • Requires soldering for installation

Best for

General-purpose PCB calibration and presets

Not ideal for

Applications needing fine multi-turn resolution

Specifications

ManufacturerBOURNS
Resistance (Ohm)10K
Tolerance (%)10
Temperature Coefficient±100ppm/℃
Operating Temperature (°C)-55 to 125
Mounting TypeThrough Hole
Length (mm)9.5
Width (mm)9.5
Weight (g)0.1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Bourns 3386P 10k Ohm Trimpot Trimmer Potentiometer

Frequently Asked Questions

What is the resistance of this trimmer?
It has a nominal resistance of 10k Ohm with a tolerance of ±10%.
How do I adjust the trimmer?
Use a small screwdriver to turn the adjustment screw on the top of the component.
Is this a through-hole or surface-mount component?
It is a through-hole component, so it requires a PCB with holes and soldering.
What is included in the package?
The package includes one Bourns 3386P 10k Ohm trimpot trimmer potentiometer.
What is the operating temperature range?
It can operate from -55°C to 125°C.
Does it come with a knob or shaft?
No, this is a trimmer potentiometer designed for screwdriver adjustment and does not include a separate knob.

Overview

The Bourns 3386P is a 10k Ohm single-turn trimmer potentiometer built for through-hole PCB mounting. It provides a simple way to fine-tune resistance in a circuit, whether you are setting a reference voltage, calibrating a sensor, or adjusting an audio path. The component is adjusted with a screwdriver, so no special tools are required for setup or rework.

Key Features

  • 10k Ohm resistance: A common value for many divider and feedback networks.
  • ±10% tolerance: Gives a known window for initial circuit design.
  • Single-turn adjustment: Fast, direct setting without multi-turn counting.
  • Through-hole mounting: Leads pass through the board for a strong solder joint.
  • Temperature stability: ±100ppm/°C coefficient helps maintain settings as temperature changes.
  • Wide operating range: Functions from -55°C to 125°C.

Specifications Explained

The 10k Ohm resistance is the nominal end-to-end value, and the ±10% tolerance means the actual resistance can fall within a small band around that figure. For most calibration tasks, this is acceptable because the trimmer is adjusted to the required value anyway. The ±100ppm/°C temperature coefficient describes how much the resistance drifts with temperature; a lower number is better for stability, and this part offers a reasonable balance for general-purpose electronics. The operating temperature range of -55°C to 125°C covers typical indoor and many outdoor environments. The 9.5mm × 9.5mm body and 0.1g weight make it easy to place on compact boards, and the through-hole leads suit standard prototyping and production soldering.

Compatibility and Requirements

This trimmer is designed for through-hole PCBs and requires soldering. It is adjusted with a screwdriver. No other accessories are needed for basic operation. Ensure your board layout provides clearance for the 9.5mm × 9.5mm body and access to the adjustment screw.

Typical Uses

Common applications include setting bias levels, calibrating sensor outputs, adjusting reference voltages, tuning audio circuits, and presetting values in power supplies. It is also useful in educational projects and breadboard-to-PCB transitions where a variable resistor is needed.

What's in the Box

One Bourns 3386P 10k Ohm trimpot trimmer potentiometer.

Quick specs

Manufacturer
BOURNS
Resistance (Ohm)
10K
Tolerance (%)
10
Temperature Coefficient
±100ppm/℃
Operating Temperature (°C)
-55 to 125
Mounting Type
Through Hole
See all specifications