
1 / 3 · Click to enlarge
AI Summary
A single-axis MEMS inclinometer with a ±180° range, 0.2° accuracy and RS485 Modbus output in an IP67 housing. It gives reliable X-axis tilt readings for industrial automation, leveling and structural monitoring.
Key Highlights
- Single-axis MEMS tilt sensing across a full ±180° range
- 0.2° accuracy with 0.02° resolution for precise angle readings
- RS485 Modbus output for reliable industrial data transmission
- IP67-rated enclosure for dusty and wet environments
- Adjustable 5–100Hz output with startup under three seconds
- Wide 9–35V DC supply for flexible system integration
Ideal For
- Industrial automation engineers building Modbus-based control panels
- Integrators working on leveling and platform positioning systems
- Maintenance teams monitoring structural or machinery tilt
- Solar tracker and antenna positioning projects
- Equipment builders needing a sealed tilt sensor in harsh environments
Buying Tip
Confirm that your controller supports RS485 Modbus and that you are ordering the RS485 interface variant, since RS232 and TTL versions are also listed for this model.
Elecvora expert review
Our verdict
The BWK217S is a well-rounded industrial inclinometer that pairs a wide ±180° range with useful 0.2° accuracy and a sealed IP67 body. Its RS485 Modbus interface makes it easy to fold into existing automation networks.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Full ±180° single-axis range with 0.02° resolution
- RS485 Modbus output suited to industrial networks
- IP67 housing and 90,000+ hour MTBF rating
- Wide 9–35V DC input and fast sub-three-second startup
- Adjustable 5–100Hz output frequency
Cons
- Single-axis measurement only, so multi-axis tilt needs additional sensors
- Interface must be confirmed at order because RS232, RS485 and TTL variants are listed
- No cable or mounting hardware is stated in the package contents
Best for
Industrial tilt monitoring and leveling systems on Modbus networks
Not ideal for
Projects needing multi-axis angle sensing or simple analog output
Specifications
| Shipping Weight | 0.0120 kg |
|---|---|
| Shipping Dimensions | 12 × 12 × 7 cm |
What's in the box
- 1 x BWSENSING BWK217S Modbus Single-Axis Inclinometer Sensor
Frequently Asked Questions
What is the measuring range of the BWK217S?
How accurate are the readings?
What voltage does it need?
How do I connect it to my controller?
Is it suitable for outdoor or wet environments?
What is included with the sensor?
Overview
The BWSENSING BWK217S is a single-axis inclinometer that measures tilt on the X-axis across a full ±180° range. Inside, MEMS sensing technology produces a stable output, and the sensor reports angles with 0.2° accuracy and 0.02° resolution. Communication runs over RS485 using the Modbus protocol, which makes the device a practical fit for industrial systems that already rely on Modbus networks.
Housed in an IP67-rated enclosure and rated for a mean time between failures of at least 90,000 hours, the BWK217S is designed to keep working where dust and moisture are part of daily operation. It accepts a 9–35V DC supply, starts up in under three seconds, and lets you set the output frequency between 5 and 100Hz.
Key Features
- Wide measuring range: ±180° on a single axis covers everything from near-level surfaces to full inversion.
- Precise readings: 0.2° accuracy and 0.02° resolution support fine angle detection.
- RS485 Modbus output: a familiar industrial interface for long-distance data transmission.
- IP67 protection: sealed against dust and water ingress for harsh environments.
- Adjustable output frequency: 5–100Hz lets you balance responsiveness and data load.
- Fast startup: ready in under three seconds after power-up.
Specifications Explained
Accuracy and resolution are the numbers that matter most for tilt work. Accuracy of 0.2° tells you how close a reading is to the true angle, while 0.02° resolution shows the smallest change the sensor can report. Together they suit monitoring tasks where small shifts need to be visible.
RS485 Modbus is a two-wire industrial bus that carries data reliably over longer distances than simple analog or short-range digital links. If your controller or PLC speaks Modbus, integration is straightforward.
The 9–35V DC input covers common industrial supply voltages, so the sensor can usually share the power rail already present in a panel. Shock resistance is rated at 2000g for 0.5ms, three times per axis, and electromagnetic compatibility follows GBT17626, with insulation resistance of at least 100 MΩ.
Compatibility and Requirements
The BWK217S requires a 9–35V DC power source and an RS485 Modbus master or controller to read its output. It is designed for industrial fixed mounting, and the 55 × 37 × 24 mm body fits into compact enclosures and machine frames. The product data lists RS232, RS485 and TTL as optional output interfaces, so confirm the interface of the exact variant you order before wiring it into your system.
Typical Uses
- Leveling systems and platform angle control
- Structural and tilt monitoring installations
- Industrial machinery alignment checks
- Automation equipment needing real-time inclination data
- Solar tracking and positioning frames
What's in the Box
1 x BWSENSING BWK217S Modbus single-axis inclinometer sensor.


















