Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-axis industrial inclinometer measuring ±90° on X and Y with 0.2° accuracy and 0.02° resolution. Its 4-20mA output and IP67 housing suit long-cable industrial tilt monitoring.

Key Highlights

  • Dual-axis X-Y tilt measurement across a full ±90° range
  • 0.2° accuracy with a fine 0.02° resolution
  • 4-20mA current output for noise-resistant industrial signal runs
  • IP67-rated housing for dusty and wet environments
  • Wide 12-36VDC supply with -40°C to +85°C operating range
  • 100Hz response frequency and 0.001ms response time

Ideal For

  • Industrial automation engineers building levelling control loops
  • Solar tracker designers needing dual-axis angle feedback
  • Structural and tower monitoring specialists
  • Integrators working with PLC 4-20mA analogue inputs
  • Equipment manufacturers adding tilt safety control

Buying Tip

Confirm your PLC or indicator accepts a 4-20mA loop input and that your total loop resistance stays at or below 500Ω before ordering.

Elecvora expert review

Our verdict

The BWK228 is a solid choice for industrial tilt feedback where a 4-20mA loop is already part of the control architecture. Its dual-axis range, fine resolution and IP67 housing cover most levelling and tracking duties without extra signal conditioning.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual-axis ±90° measurement in one compact module
  • 4-20mA output resists noise over long cable runs
  • IP67 protection and wide -40°C to +85°C range
  • Fast 100Hz response and 0.001ms response time
  • High 0.02° resolution for small angle changes

Cons

  • Requires a 4-20mA-capable receiver, not a simple voltage input
  • Cabling and mounting hardware are not included
  • Current-loop wiring is less plug-and-play than digital interfaces

Best for

Industrial levelling, solar tracking and tower tilt monitoring with PLC-based control

Not ideal for

Hobby projects needing a simple plug-and-play digital tilt reading

Specifications

Item TypeInclinometer Sensor
Model No. / NameBWK228
Operating Voltage (VDC)12 to 36
Sensing range±90° (Dual-Axis: X-Y)
Output TypeCurrent (4–20mA)
Frequency100Hz(Response Frequency)
ProtectionIP67
Response Time (mS)0.001
Accuracy0.2°
Resolution0.02°
Operating Temperature (°C)–40°C to +85°C
Max. Output Load≤500Ω
MTBF≥90,000 hours
Length (mm)90
Width (mm)40
Weight (g)250
Shipping Weight0.3 kg
Shipping Dimensions12 × 12 × 7 cm

What's in the box

  • 1 x BWSENSING BWK228 Dual Axis Inclinometer Sensor

Frequently Asked Questions

What does the BWK228 measure?
It measures inclination on two axes, X and Y, across a ±90° range and reports the angle as a 4-20mA current signal.
What supply voltage does it need?
The sensor operates from a regulated 12 to 36VDC supply.
Can I connect it directly to a microcontroller?
Not directly, because the output is a 4-20mA current loop. You need a receiver or shunt arrangement that converts the current to a voltage your device can read.
What is the maximum output load?
The maximum output load is 500Ω, so keep the total resistance in your current loop at or below that value.
Is the sensor suitable for outdoor use?
Yes, it carries IP67 protection and operates from -40°C to +85°C, making it suitable for many outdoor and plant-floor installations when connectors are properly sealed.
What is included in the box?
The package contains one BWSENSING BWK228 Dual Axis Inclinometer Sensor. Cabling and mounting hardware are not listed, so source them separately.

Overview

The BWSENSING BWK228 is an industrial inclinometer that reports tilt on two axes at once, covering a ±90° span on both X and Y. It is designed for system integrators and engineers who need a repeatable angle signal inside a control loop rather than a simple tilt switch. The sensor outputs a 4-20mA current signal, a format that holds up well over long cable runs and in electrically noisy plant environments.

Housed in a compact 90 x 40mm body weighing roughly 250g, the BWK228 combines 0.2° accuracy with 0.02° resolution, so small angle changes remain visible in the output. IP67 protection and a -40°C to +85°C operating range make it suitable for outdoor installations and demanding industrial sites.

Key Features

  • Dual-axis sensing: simultaneous X and Y inclination measurement over ±90°.
  • Precise output: 0.2° accuracy and 0.02° resolution for fine angle tracking.
  • 4-20mA current output: stable transmission over long cabling with a maximum output load of ≤500Ω.
  • Fast response: 100Hz response frequency and 0.001ms response time.
  • Rugged build: IP67 protection with an anti-interference aluminium housing.
  • Wide power input: operates from 12 to 36VDC.

Specifications Explained

Range and precision

The ±90° measuring range on both axes means the sensor can track a surface from flat through vertical in either direction. Accuracy of 0.2° describes how close the reported angle is to the true angle, while 0.02° resolution describes the smallest change the output can distinguish. Together they suit applications where both absolute correctness and small-movement detection matter.

Current output

A 4-20mA loop signal is less prone to voltage drop and electrical noise than a simple voltage output, which is why it is common in industrial instrumentation. The maximum output load of ≤500Ω defines the loop resistance the sensor can drive.

Power and environment

The 12-36VDC input range gives flexibility when tapping into existing 24V industrial supplies. IP67 sealing protects against dust and temporary water immersion, and the -40°C to +85°C range covers most outdoor and plant-floor conditions. A mean time between failures of ≥90,000 hours supports long-term deployment planning.

Compatibility and Requirements

The BWK228 requires a regulated DC supply between 12 and 36V and a receiving device that accepts a 4-20mA current loop, such as a PLC analogue input or dedicated indicator. Keep the total loop load at or below 500Ω. Wiring and mounting hardware are not listed in the package contents, so plan for your own cabling and fasteners.

Typical Uses

  • Industrial automatic levelling and platform control
  • Photovoltaic tracker angle feedback
  • Tower and structure tilt monitoring
  • Lifting equipment inclination control
  • Medical instruments and special valve positioning
  • Oil drilling equipment and industrial converter systems

What's in the Box

1 x BWSENSING BWK228 Dual Axis Inclinometer Sensor. Refer to the datasheet in the attachments section for detailed wiring and configuration information.

Quick specs

Item Type
Inclinometer Sensor
Model No. / Name
BWK228
Operating Voltage (VDC)
12 to 36
Sensing range
±90° (Dual-Axis: X-Y)
Output Type
Current (4–20mA)
Frequency
100Hz(Response Frequency)
See all specifications