Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single-axis MEMS inclinometer covering ±180° with 0.3° accuracy and 0.03° resolution, reporting over RS485. Its IP67 magnesium alloy housing and 9V to 35V input make it suitable for outdoor and industrial tilt monitoring.

Key Highlights

  • Single-axis tilt measurement across a full ±180° range
  • 0.3° accuracy with 0.03° resolution from a MEMS accelerometer
  • RS485 digital output with adjustable 5Hz to 100Hz frequency
  • IP67 magnesium aluminium alloy housing for harsh locations
  • Wide 9V to 35V supply and -40°C to +85°C operating range
  • Compact 55 × 37 × 24 mm body with 1.5m cable and metal connector

Ideal For

  • Industrial automation engineers integrating tilt feedback
  • Solar tracker installers and maintenance teams
  • Structural and tower monitoring specialists
  • Equipment manufacturers needing levelling control
  • System integrators building RS485 sensor networks

Buying Tip

Check that your controller or logger has an RS485 port and can supply between 9V and 35V before ordering, since the sensor needs both to operate.

Elecvora expert review

Our verdict

The MSK217S combines a wide ±180° range, fine 0.03° resolution and a sealed magnesium alloy body in a compact package. Its RS485 output and broad 9V to 35V input make it a practical choice for industrial tilt monitoring where analogue signals would be vulnerable to noise.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide ±180° single-axis measurement range
  • 0.3° accuracy with 0.03° resolution
  • IP67 magnesium aluminium alloy housing
  • RS485 output with adjustable 5Hz to 100Hz rate
  • Broad 9V to 35V supply and -40°C to +85°C range

Cons

  • Requires a host with RS485 support
  • Single-axis only, so multi-axis tilt needs additional sensors
  • No mounting hardware listed beyond the three M4 screw points

Best for

Industrial tilt measurement and outdoor alignment monitoring over RS485

Not ideal for

Projects without an RS485-capable controller or data logger

Specifications

Shipping Weight5 kg
Shipping Dimensions12 × 12 × 7 cm

What's in the box

  • 1 x BWSENSING MSK217S Single-Axis Inclinometer, ±180° Tilt Sensor, 0.3° Accuracy, MEMS, RS485

Frequently Asked Questions

What range and accuracy does the MSK217S offer?
It measures ±180° on a single axis with 0.3° accuracy and 0.03° resolution.
What output interface does the sensor use?
The MSK217S provides a digital RS485 output with an adjustable frequency from 5Hz to 100Hz.
What supply voltage does it need?
It operates from 9V to 35V DC and draws a working current of 20mA to 40mA.
Can it be used outdoors?
Yes. The magnesium aluminium alloy housing is rated IP67, and the sensor operates from -40°C to +85°C.
How is the sensor mounted?
It is fixed with three M4 screws, and the metal connector is supplied with a 1.5m cable.
What is included in the package?
The package contains one BWSENSING MSK217S single-axis inclinometer with its 1.5m cable.

Overview

The BWSENSING MSK217S is a single-axis inclinometer designed for measuring tilt in industrial and outdoor installations. A MEMS accelerometer inside the sealed housing converts inclination into a digital value that is sent over an RS485 link, making the sensor straightforward to integrate with controllers, data loggers and automation systems.

With a ±180° measurement span, 0.3° accuracy and 0.03° resolution, the MSK217S suits applications where a compact, robust sensor must report tilt reliably over long periods. The magnesium aluminium alloy body is rated IP67, and the electronics run from a 9V to 35V supply across a -40°C to +85°C operating range.

Key Features

  • Full-range single-axis sensing: measures inclination from -180° to +180° on one axis.
  • Precise readings: 0.3° accuracy and 0.03° resolution for fine tilt monitoring.
  • RS485 interface: digital output suited to industrial networks and longer cable runs.
  • Adjustable output rate: selectable from 5Hz to 100Hz to match your sampling needs.
  • Rugged enclosure: IP67 magnesium aluminium alloy housing with oxidation treatment.
  • Wide power input: operates from 9V to 35V with a working current of 20mA to 40mA.

Specifications Explained

Range and accuracy: the ±180° span means the sensor can report orientation through a complete rotation on a single axis. Accuracy of 0.3° sets how close each reading is to true tilt, while 0.03° resolution defines the smallest change the output can show.

RS485 output: readings are delivered digitally rather than as an analogue voltage, which helps maintain signal integrity in electrically noisy environments. The output frequency can be set between 5Hz and 100Hz, so slow monitoring and faster control loops are both possible.

Power and environment: the 9V to 35V input range accommodates common industrial supplies. The -40°C to +85°C operating window and IP67 sealing allow use outdoors and in washdown or dusty areas. Impact resistance is rated at 2000g for 0.5ms, insulation resistance is at least 100MΩ, and MTBF is at least 90000 hours.

Compatibility and Requirements

The MSK217S requires a host device with an RS485 interface and a DC supply within 9V to 35V. It is mounted with three M4 screws, and the metal connector terminates in a 1.5m cable. Confirm that your controller or logger supports RS485 communication before installation.

Typical Uses

  • Photovoltaic tracking system alignment
  • Tower and mast tilt monitoring
  • Industrial equipment levelling
  • Lifting equipment inclination control
  • Medical equipment positioning

What's in the Box

1 x BWSENSING MSK217S single-axis inclinometer with 1.5m cable.

Quick specs

Shipping Weight
5 kg
Shipping Dimensions
12 × 12 × 7 cm
See all specifications