Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by CAPUF, this pic programmers and debuggers is a good fit for everyday home and hobby use. Main specs: shipping weight 0.015 kg.

Key Highlights

  • Shipping Weight: 0.015 kg

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.015 kg
Shipping Dimensions10 × 7 × 2 cm

Overview

The CAPUF WCH CH32V003 Programmer/Debugger, made by CAPUF, is listed in our pic programmers and debuggers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 7 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The WCH-LinkE module can be used for online debugging and downloading of WCH RISC-V architecture MCU and can also be used for online debugging and downloading for ARM chips with SWD/JTAG interface. A JTAG interface is provided to support four-wire connection (TMS line, TCK line, TDI line and TDO line) to extend the JTAG interface for a computer to operate CPU, DSP, FPGA, CPLD and other devices. Through its USB2.0 full-speed interface, it can be connected to a computer host. It is plug and play. Connected to target chips by the debugging interface, it can be used for debugging and programming. Useful Link Products - CAPUF

Features:

  1. Two 3.3V/5V power supply outputs are supported
  2. Supports USB to TTL serial port function
  3. Supports RISC-V chip single-wire/dual-wire downloading and debugging
  4. Supports downloading and debugging for ARM kernel MCU with SWD/JTAG interface
  5. Supports automatic firmware detection and upgrade
  6. 3.3V/5V output power supply is controllable
  7. Automatic power-off protection
  8. Red and blue LED indicator lights make it easy to check the working status
  9. Supports a host computer to switch working mode via one key

Specifications:

  1. Data bit: 8
  2. Stop bit: 1
  3. Checksum bit: None
  4. Flow control: None
  5. Length: 75mm
  6. Width: 24mm
  7. Height: 15mm

Package Includes:

1 x CAPUF WCH CH32V003 Programmer/Debugger

Quick specs

Shipping Weight
0.015 kg
Shipping Dimensions
10 × 7 × 2 cm
See all specifications