Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A solder-it-yourself kit that assembles into a compact AM/FM stereo radio with CD9088 FM and TA7642 AM tuning. It is a practical, low-cost way to learn soldering and radio circuit basics while ending up with a working receiver.

Key Highlights

  • Solder-it-yourself AM/FM stereo radio assembly kit
  • FM tuning 76-108MHz via CD9088 with SMT components
  • AM tuning 525-1605KHz via TA7642 IC
  • Compact finished size of about 100 x 70 mm
  • Light build at roughly 85 g with white plastic case
  • Simple circuit designed for a high assembly success rate

Ideal For

  • Hobbyists learning practical soldering skills
  • Students and electronics club members building a first radio
  • Makers who enjoy kit builds with a working result
  • Anyone wanting a compact AM/FM receiver project

Buying Tip

Check that you already own a soldering iron, solder and basic hand tools before ordering, since this kit ships as unassembled components.

Elecvora expert review

Our verdict

A tidy, low-cost kit that teaches real soldering and radio basics with a genuinely usable AM/FM result. The split CD9088 and TA7642 design keeps the circuit readable for beginners.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear two-band design with dedicated FM and AM ICs
  • Compact 100 x 70 mm finished size
  • Simple circuit aimed at a high assembly success rate
  • Includes a white plastic case

Cons

  • Requires soldering tools and skills you must supply
  • Ships unassembled, so no working radio out of the box
  • Power source is not specified in the product data

Best for

Beginners and hobbyists wanting a hands-on AM/FM radio build

Not ideal for

Buyers who want a ready-to-use radio without soldering

Specifications

Model No. / NameCF210SP
ColorWhite
Receiving rangeAM 525-1605KHz, FM 76-108MHz
ICFM Band: CD9088, AM Band: TA7642
Length (mm)100
Width (mm)70
Weight (g)85
Shipping Weight0.089 kg
Shipping Dimensions10 × 10 × 3 cm

What's in the box

  • 1 x DIY Electronic Assembly Kit for AM/FM Stereo Radio
  • Components set for assembly
  • White plastic case

Frequently Asked Questions

Do I need to solder this kit?
Yes. The CF210SP is a DIY assembly kit supplied as components, so you solder the board yourself using your own soldering iron and solder.
What frequency ranges does it receive?
The FM band covers 76-108MHz and the AM band covers 525-1605KHz, using the CD9088 and TA7642 ICs respectively.
What size is the finished radio?
The assembled unit measures approximately 100 mm long and 70 mm wide, and weighs around 85 g.
What is included in the package?
The package contains one DIY electronic assembly kit for an AM/FM stereo radio, including the components and a white plastic case.
Is a battery or power supply included?
The product data does not specify a power source or battery, so check your kit contents and plan a suitable supply before building.
How should I care for the finished radio?
Keep it dry, avoid dropping it, and store it away from moisture and heavy dust to protect the soldered joints and case.

Overview

The CF210SP is a DIY electronic assembly kit that you solder yourself to produce a working AM/FM stereo radio. It arrives as a set of components and a white plastic case, and the finished build measures about 100 x 70 mm and weighs roughly 85 g. This is a project kit, not a plug-and-play receiver, so the experience is as much about the build as the finished radio.

The design splits the two bands across dedicated ICs: a CD9088 for FM and a TA7642 for AM. That separation keeps the circuit straightforward and makes the kit a useful introduction to two common radio architectures.

Key Features

  • Two-band tuning: FM coverage from 76-108MHz and AM coverage from 525-1605KHz.
  • Dedicated ICs: CD9088 handles the FM band, TA7642 handles the AM band.
  • Surface-mount FM stage: SMT components are used in the FM section for a compact layout.
  • Compact footprint: approximately 100 mm long and 70 mm wide once assembled.
  • Lightweight: about 85 g, with shipping weight listed at 0.089 kg.
  • Simple circuit: intended to be easy to solder with good selectivity and a high success rate of assembly.

Specifications Explained

Receiving range. The FM range of 76-108MHz covers the standard broadcast band used in most regions, and the lower end of that range is also where campus and some TV audio signals sit. The AM range of 525-1605KHz is the conventional medium-wave broadcast band.

ICs. The CD9088 is the FM tuner IC, paired with surface-mount parts. The TA7642 is the AM IC. Knowing which chip serves which band helps when you are tracing the circuit during assembly or troubleshooting.

Size and weight. At roughly 100 x 70 mm and 85 g, the finished radio is small enough to sit on a shelf or workbench without taking up much space. Shipping dimensions of 10 x 10 x 3 cm reflect the compact packed kit.

Compatibility and Requirements

The kit is supplied as unassembled components, so you will need your own soldering iron, solder and basic hand tools to complete it. No power source, battery or enclosure hardware beyond the included white plastic case is specified in the product data, so check your kit contents before starting. The radio is designed around the AM and FM bands listed above; no other bands or digital services are supported.

Typical Uses

  • Learning to solder on a project with a clear, working outcome.
  • Classroom or club electronics exercises covering radio receivers.
  • Bench practice for reading component values and tracing a schematic.
  • Building a small AM/FM receiver for desk or workshop use.

What's in the Box

The package contains one DIY electronic assembly kit for an AM/FM stereo radio, including the components and the white plastic case. Soldering tools and any power source are not included.

Quick specs

Model No. / Name
CF210SP
Color
White
Receiving range
AM 525-1605KHz, FM 76-108MHz
IC
FM Band: CD9088, AM Band: TA7642
Length (mm)
100
Width (mm)
70
See all specifications