Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: item type USB to UART / USB to TTL Serial Converter Module; model no. / name CH343P; supply voltage 3.3V to 5V. Check that your power source supplies 3.3V to 5V before connecting it.

Key Highlights

  • Item Type: USB to UART / USB to TTL Serial Converter Module
  • Model No. / Name: CH343P
  • Supply Voltage: 3.3V to 5V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeUSB to UART / USB to TTL Serial Converter Module
Model No. / NameCH343P
Supply Voltage3.3V to 5V
Baud Rate (bps)50 bps – 6 Mbps
CompatibilityUSB V2.0
Data Bit5, 6, 7, 8
Operating Voltage (V)USB : 5 / 3.3
UART I/O Voltage1.8V to 5V
Length (mm)36
Width (mm)08
Weight (g)03
Shipping Weight0.005 kg
Shipping Dimensions6 × 5 × 2 cm

Overview

The CH343P USB to Serial/TTL UART Module is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: USB to UART / USB to TTL Serial Converter Module
  • Model No. / Name: CH343P
  • Supply Voltage: 3.3V to 5V (match this to your power supply; too high a voltage can damage the part)
  • Baud Rate (bps): 50 bps – 6 Mbps
  • Compatibility: USB V2.0
  • Data Bit: 5, 6, 7, 8
  • Operating Voltage (V): USB : 5 / 3.3 (match this to your power supply; too high a voltage can damage the part)
  • UART I/O Voltage: 1.8V to 5V (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The CH343P USB to Serial Converter High-Speed Asynchronous Serial Module is a powerful and flexible USB-to-serial solution designed for modern development and industrial applications. Built around the CH343 chip, it allows seamless conversion between USB and high-speed UART communication with stable full-duplex performance up to 6 Mbps.

USB to Serial Converter With built-in firmware that emulates a standard serial port, it works smoothly with existing serial applications on Windows without any code changes. Supporting multiple voltage levels, MODEM control signals, RS485 direction control, and configurable EEPROM parameters, this module is ideal for upgrading MCUs, debugging embedded systems, and expanding serial connectivity via USB.


Features:

  1. USB 2.0 full-speed device interface
  2. Built-in firmware emulating a standard serial (COM) port
  3. Supports CDC class driver and high-rate VCP vendor driver
  4. Baud rate support from 50 bps to 6 Mbps
  5. Automatic baud rate recognition up to 115200 bps
  6. Full-duplex UART with independent TX/RX buffers
  7. Supports RTS, CTS, DTR, DSR, DCD, and RI signals

Package Includes:

1 x CH343P USB to Serial/TTL UART Module

Quick specs

Item Type
USB to UART / USB to TTL Serial Converter Module
Model No. / Name
CH343P
Supply Voltage
3.3V to 5V
Baud Rate (bps)
50 bps – 6 Mbps
Compatibility
USB V2.0
Data Bit
5, 6, 7, 8
See all specifications