Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This compact breakout board carries a 12-bit MCP4725 digital-to-analog converter that talks to your microcontroller over I2C. It turns digital values into a stable analog voltage from a 2.7V to 5.5V supply.

Key Highlights

  • 12-bit DAC resolution for fine analog voltage steps
  • Simple I2C interface with SCL and SDA pins broken out
  • Wide 2.7V to 5.5V operating voltage range
  • Compact 15 x 15 mm PCB with M2.5 mounting holes
  • Dedicated signal OUT and GND pins for easy probing
  • Lightweight board at just 3 g for tight builds

Ideal For

  • Makers building waveform generators and signal sources
  • Students learning I2C and digital-to-analog conversion
  • Electronics engineers needing an adjustable voltage reference
  • Arduino and microcontroller hobbyists adding analog output
  • Test bench users who need a compact signal source

Buying Tip

Check that your project's I2C bus voltage falls within the 2.7V to 5.5V supply range before wiring the board, and confirm you can solder to the breakout pads.

Elecvora expert review

Our verdict

A tidy, affordable breakout that makes adding a real analog output to an I2C project simple. It covers the essentials well, provided you are comfortable soldering and writing your own driver code.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 12-bit resolution gives fine output steps
  • Wide 2.7V to 5.5V supply suits 3.3V and 5V systems
  • Compact 15 x 15 mm board with M2.5 mounting holes
  • Signal OUT and GND pins exposed for probing

Cons

  • Pads require soldering; no pre-fitted headers
  • No onboard regulator, so supply must stay within 2.7V to 5.5V
  • Driver code and register setup are left to the user

Best for

Makers and students adding a precise analog output to an I2C project

Not ideal for

Users wanting a plug-and-play module with pre-soldered headers and ready-made software

Specifications

Operating Voltage (V)2.7 to 5.5
Interface TypeI2C
Resolution12-bits
Mounting Hole Diameter (mm)M2.5
PCB Size ( L x W ) mm15 x 15
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions3 × 3 × 2 cm

What's in the box

  • 1 x MCP4725 I2C DAC Breakout Board

Frequently Asked Questions

What does this board actually do?
It converts a digital value sent over I2C into a corresponding analog voltage at the OUT pin, using a 12-bit MCP4725 DAC.
What supply voltage does it need?
The board operates from 2.7V to 5.5V, so it can share a rail with most 3.3V or 5V microcontroller systems.
How do I connect it to my microcontroller?
Connect SCL and SDA to your host's I2C bus, and VCC and GND to a supply within the rated range. The analog result appears on the OUT pin.
Does it come with headers or cables?
The package contains one MCP4725 I2C DAC breakout board. Headers, wires and cables are not listed as included, so plan your own connections.
How many output steps can it produce?
With 12-bit resolution the output is divided into 4096 steps across the converter's range.
Where can I find technical details?
The MCP4725 datasheet and schematic are the reference documents for register behaviour and wiring details.

Overview

The CJMCU MCP4725 I2C DAC Breakout Development Board puts a 12-bit digital-to-analog converter within reach of any project that can speak I2C. Instead of juggling PWM filters or external reference circuits, you send a digital value over the two-wire bus and the board outputs a corresponding analog voltage. It is a small, low-cost module that suits breadboards, perfboard builds and finished enclosures alike.

Key Features

  • 12-bit resolution: the converter divides its output range into 4096 steps, giving smooth control for waveforms, setpoints and calibration signals.
  • I2C interface: SCL and SDA pins are broken out alongside VCC and GND for a standard four-wire connection.
  • Flexible supply: operates from 2.7V to 5.5V, so it fits both 3.3V and 5V logic projects.
  • Compact footprint: a 15 x 15 mm PCB with M2.5 mounting holes keeps the board easy to fix in place.
  • Signal access: a dedicated OUT pin and ground are exposed for connecting an oscilloscope or the next stage of your circuit.

Specifications Explained

The 12-bit resolution is the headline figure. With 4096 discrete output levels, small changes in your digital input produce small, predictable changes in output voltage, which matters when you are generating a sine wave, a ramp or a precise reference level. The I2C interface keeps wiring minimal and lets the DAC share a bus with sensors, displays and other peripherals. The 2.7V to 5.5V supply range means the board can run from the same rail as most hobby microcontrollers, and the 15 x 15 mm board size with M2.5 holes makes mechanical mounting straightforward. At 3 g, it adds almost nothing to the weight of a build.

Compatibility and Requirements

You need a host device with an I2C bus and a suitable power source within the 2.7V to 5.5V range. The board exposes SCL, SDA, VCC and GND for the bus connection, plus OUT and GND for the analog signal. Wiring is done by soldering to the breakout pads. Refer to the MCP4725 datasheet and schematic for register-level details before writing your driver.

Typical Uses

  • Generating sine, triangle and ramp waveforms for audio and test signals
  • Producing adjustable reference voltages for sensor calibration
  • Analog control of dimmers, motor drivers and other voltage-controlled circuits
  • Teaching and learning how digital-to-analog conversion works

What's in the Box

One MCP4725 I2C DAC Breakout Board.

Quick specs

Operating Voltage (V)
2.7 to 5.5
Interface Type
I2C
Resolution
12-bits
Mounting Hole Diameter (mm)
M2.5
PCB Size ( L x W ) mm
15 x 15
Weight (g)
3
See all specifications