Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A CNTD limit switch with a long metal roller lever, rated 15A at 250V and wired as 1NO plus 1NC. The roller lever gives smooth, reliable position detection across a wide travel range.

Key Highlights

  • Long metal roller lever for smooth actuation across extended travel
  • 1NO plus 1NC contact configuration for flexible control wiring
  • 15A at 250V rating supports direct switching of larger loads
  • Operating range of -20 to +80 degrees Celsius without icing
  • Electrical life rated above 500,000 operations
  • Compact housing with low shipping weight for easy spares stocking

Ideal For

  • Machine builders specifying position feedback in control panels
  • Maintenance technicians replacing worn limit switches on conveyors
  • Automation integrators wiring safety interlocks
  • Packaging and material handling equipment owners
  • Electrical fitters servicing elevators and door mechanisms

Buying Tip

Check that your circuit's voltage and current stay within the 250V and 15A contact rating, and confirm the roller lever's travel matches the movement of the part it will sense.

Elecvora expert review

Our verdict

A solid, straightforward mechanical limit switch with a useful roller lever and a genuinely practical 15A contact rating. It suits maintenance and machine-building work where a simple, replaceable position sensor is what you need.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Long roller lever gives smooth, low-wear actuation
  • 1NO+1NC contacts cover two functions in one unit
  • 15A at 250V handles real control loads
  • Wide -20 to +80 degrees Celsius ambient range
  • Long electrical life above 500,000 operations

Cons

  • Mechanical contacts wear over time compared with non-contact sensors
  • No mounting bracket or hardware listed in the package
  • Actuation speed and frequency limits must be respected

Best for

Conveyors, doors, packaging lines and interlock circuits needing a robust mechanical position signal

Not ideal for

High-speed or high-cycle applications beyond the stated operation limits

Specifications

ManufacturerCNTD
Model No. / NameCM 1703M
Voltage Rating (V)250
Current Rating (A)15
Contact Configuration1NO+1NC
Shipping Weight0.01 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x CNTD CM-1703M 15A 250V Long Metal Roller Lever Limit Switch (1NO+1NC)

Frequently Asked Questions

Does this switch need its own power supply?
No. It is a passive mechanical switch, so it only opens or closes the circuit it is wired into. It does not require a separate supply.
What does 1NO+1NC mean for wiring?
The switch has one normally open contact and one normally closed contact. Actuating the lever closes the normally open pair and opens the normally closed pair.
Can it switch a 15A load directly?
The contacts are rated 15A at 250V, so they can carry that load within the stated rating. Confirm your circuit's voltage and current stay within those figures.
What is included in the package?
The package contains one CNTD CM-1703M 15A 250V long metal roller lever limit switch with 1NO+1NC contacts.
What temperature range can it handle?
It is specified for use from -20 to +80 degrees Celsius with no icing. The general-purpose version tolerates up to 85% relative humidity.
How long should the contacts last?
Electrical life is rated above 500,000 operations, provided the switch is used within its stated voltage, current and operating frequency limits.

Overview

The CNTD CM-1703M is a mechanical limit switch that converts the movement of a machine part into an electrical signal. A long metal roller lever acts as the sensing element: as a cam, gate or carriage passes, the roller rides over it and the lever travels far enough to trip the contacts inside. This makes the switch useful wherever you need a repeatable position signal rather than an optical or magnetic sensor.

Inside, the switch provides a 1NO+1NC contact arrangement, so one circuit closes while the other opens. That is handy for wiring a stop command and a status signal from the same device, or for building simple interlock logic.

Key Features

  • Roller lever actuator: the metal roller reduces friction and wear at the point where the machine touches the switch.
  • Dual contacts: 1NO plus 1NC gives you both a make and a break circuit.
  • 15A at 250V rating: suitable for switching loads directly in many control circuits.
  • Wide ambient range: specified for use from -20 to +80 degrees Celsius with no icing.
  • Long service life: electrical life is rated above 500,000 operations.
  • Stable contact behaviour: contact resistance is 15 milliohms maximum at initial value.

Specifications Explained

Voltage and current

The 250V and 15A ratings describe the electrical load the contacts are designed to handle. In practice this means the switch can be used in control circuits and on equipment where the contact carries a real current, not just a signal-level load. Always confirm your circuit's voltage and current stay within these figures.

Contact configuration

1NO+1NC means the switch has one normally open and one normally closed contact pair. At rest, the normally closed path conducts and the normally open path is open; actuating the lever reverses that state. This lets a single switch serve two functions in a control scheme.

Operation and environment

The switch is specified for an operation speed range of 0.05mm to 1m/s for the plunger type, with electrical operation up to 20 operations per minute. Contact resistance is 15 milliohms maximum initially, insulation resistance is at least 100 megohms below 500VDC, and the general-purpose version tolerates up to 85% relative humidity.

Compatibility and Requirements

The CM-1703M is a passive mechanical switch: it needs no supply voltage of its own and simply opens or closes the circuit it is wired into. Make sure the circuit voltage and current remain within the 250V and 15A ratings, and that the mounting position lets the roller lever meet the moving part cleanly. The switch is intended for general-purpose environments within the stated temperature and humidity limits.

Typical Uses

  • Conveyor end stops and belt position detection
  • Elevator and door position sensing
  • Packaging machine sequencing
  • Safety interlock circuits on guards and access doors
  • General machinery limit control in automation panels

What's in the Box

1 x CNTD CM-1703M 15A 250V Long Metal Roller Lever Limit Switch (1NO+1NC).

Quick specs

Manufacturer
CNTD
Model No. / Name
CM 1703M
Voltage Rating (V)
250
Current Rating (A)
15
Contact Configuration
1NO+1NC
Shipping Weight
0.01 kg
See all specifications