Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact horizontal short lever limit switch rated 10A at 250V with 1NO+1NC contacts. Its reinforced plastic housing and short actuator make it a space-efficient choice for position detection in automation equipment.

Key Highlights

  • Horizontal short lever actuator for compact, precise position detection
  • 1NO+1NC contact configuration offers flexible control wiring
  • 10A 250V rating handles moderate electrical loads
  • Reinforced plastic shell resists water and oil
  • Electrical life rated at 500,000 operations or more
  • Works from -20 to +70 degrees Celsius without icing

Ideal For

  • Automation engineers specifying conveyor position sensors
  • Maintenance technicians replacing worn limit switches
  • Packaging machine builders needing compact actuators
  • Elevator and lift service teams
  • Makers building automated mechanical projects

Buying Tip

Check that your switching load stays within 10A at 250V and that the short lever's travel matches your mechanism before ordering.

Elecvora expert review

Our verdict

A solid, compact limit switch for moderate industrial loads, with dual contacts that simplify interlock wiring. The short lever and sealed plastic body suit tight, dusty or oily machine spaces.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual 1NO+1NC contacts in one compact body
  • Reinforced plastic housing resists water and oil
  • Long electrical life of 500,000 operations or more
  • Short lever fits confined mounting positions

Cons

  • 10A 250V rating limits use to moderate loads
  • No mounting hardware or datasheet details listed in the package
  • Wiring and mounting are required before use

Best for

Position sensing and interlock switching on conveyors, packaging lines and lifts

Not ideal for

Heavy motor switching or high-current power circuits

Specifications

ManufacturerCNTD
Voltage Rating (V)250
Current Rating (A)10
Model No. / NameCZ 7140
Contact Configuration1NO+1NC
Shipping Weight0.01 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x CNTD CZ-7140 10A 250V Horizontal Short Lever Limit Switch (1NO+1NC)

Frequently Asked Questions

What does 1NO+1NC mean on this switch?
It has one normally open and one normally closed contact. Pressing the lever changes both states at once, which is useful for combined start and stop or interlock wiring.
What voltage and current can it handle?
The switch is rated at 250V and 10A. Keep your circuit within these limits.
Is a separate power supply needed?
No. It is a passive contact switch and only needs to be wired into the circuit it controls.
What is included in the package?
The package contains one CNTD CZ-7140 horizontal short lever limit switch with 1NO+1NC contacts.
What operating temperature range does it support?
It works from -20 to +70 degrees Celsius with no icing, at humidity below 95% RH.
How long is the electrical life?
The electrical life is rated at 500,000 operations or more.

Overview

The CNTD CZ-7140 is a horizontal short lever limit switch designed for accurate position detection and mechanical control in automation systems. The short lever actuator lets it work in tight spaces, while the 1NO+1NC contact set gives you a normally open and a normally closed circuit from one switching action. It is rated at 10A and 250V, making it suitable for moderate electrical loads in industrial equipment.

The housing is covered with intensive plastic for water and oil resistance, and the mechanical strength is better than the CM series of horizontal limit switches. At roughly 60g, it is light enough to mount on moving assemblies without adding meaningful load.

Key Features

  • Horizontal short lever actuator for compact installation
  • 1NO+1NC (SPDT) contact configuration
  • 10A current rating at 250V
  • Reinforced plastic shell with water and oil resistance
  • Electrical life of 500,000 operations or more
  • Contact resistance of 25 milliohms maximum at initial value

Specifications Explained

Contacts and switching

The 1NO+1NC layout means one contact closes and the other opens when the lever is pressed. This is useful where a single lever movement must both start a function and release or stop another. Contact resistance is 25 milliohms maximum at initial value, and insulation resistance is at least 100 megohms below 500VDC.

Electrical and mechanical limits

The 10A 250V rating covers moderate loads rather than heavy motors. Operation speed runs from 0.05mm to 0.5m per second, with an electrical operating frequency of 20 operations per minute. Vibration tolerance is 10 to 55Hz at 1.5mm double amplitude.

Environment

The switch operates between -20 and +70 degrees Celsius with no icing, and humidity should stay below 95% RH. Keep these limits in mind when mounting near heat sources or in damp enclosures.

Compatibility and Requirements

No specific controller or mounting standard is stated in the product data. Buyers should confirm that their circuit voltage and current stay within the 250V and 10A ratings, and that the short lever travel suits the mechanism being sensed. Wiring is required; the switch is a passive contact device and needs no separate power supply of its own.

Typical Uses

  • Conveyor position and end-of-travel detection
  • Packaging machinery sequencing
  • Elevator and lift position sensing
  • Safety interlocks and automated process control
  • General industrial equipment limit control

What's in the Box

1 x CNTD CZ-7140 10A 250V horizontal short lever limit switch with 1NO+1NC contacts.

Quick specs

Manufacturer
CNTD
Voltage Rating (V)
250
Current Rating (A)
10
Model No. / Name
CZ 7140
Contact Configuration
1NO+1NC
Shipping Weight
0.01 kg
See all specifications