Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact CNTD roller lever limit switch with 1NO+1NC contacts, rated 6A at 250V and sealed to IP66. Its cast aluminium body and double spring contact mechanism make position detection reliable on conveyors and automated machinery.

Key Highlights

  • Roller lever actuator for smooth, repeatable position detection
  • 1NO+1NC double-circuit contact configuration in one unit
  • 6A at 250V rating suits medium-power control circuits
  • IP66 sealed against water and oil in industrial settings
  • Cast aluminium housing for high mechanical strength
  • Compact footprint for space-limited machine installations

Ideal For

  • Industrial maintenance technicians servicing conveyors
  • Machine builders designing automated equipment
  • Control panel integrators needing compact position switches
  • Factory automation engineers specifying end-of-travel detection

Buying Tip

Check that your actuating cam or machine part will contact the roller lever within its travel range before mounting, and confirm your circuit stays within the 6A at 250V rating.

Elecvora expert review

Our verdict

The CNTD CWLCA2-2 is a well-built compact limit switch with a useful 1NO+1NC contact set and solid IP66 sealing for industrial work. Its cast aluminium body and double spring mechanism suggest dependable service in routine position-sensing duties.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 1NO+1NC contacts in one compact housing
  • IP66 sealing against water and oil
  • Cast aluminium body for mechanical strength
  • Electrical life rated at 500,000 operations or more

Cons

  • Mounting hardware and connectors not included
  • Not intended for heavy motor loads at 6A rating
  • Roller lever travel must be checked before installation

Best for

Conveyor and automated machinery position detection

Not ideal for

Switching high-power motor circuits directly

Specifications

ManufacturerCNTD
Voltage Rating (V)250
Current Rating (A)6
Model No. / NameCWLCA2 2
Contact Configuration1NO+1NC
Shipping Weight0.01 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x CNTD CWLCA2-2 250V Compact Roller Lever Limit Switch (1NO+1NC)

Frequently Asked Questions

What does 1NO+1NC mean on this limit switch?
It has one normally open contact and one normally closed contact. Both change state at the same actuation point, so you can use one for signalling and the other for an interlock or complementary circuit.
What voltage and current can it switch?
The switch is rated for 6A at 250V. Keep your control circuit within these limits and do not use it to switch heavy motor loads directly.
Is the switch waterproof?
It carries an IP66 protection level, so it resists water and oil ingress. It is designed for industrial environments rather than continuous immersion.
What is included in the package?
The package contains one CNTD CWLCA2-2 250V Compact Roller Lever Limit Switch with 1NO+1NC contacts. Mounting hardware and connectors are not included.
How long does the switch last?
Electrical life is rated at 500,000 operations or more. Actual service life depends on load, actuation speed and environmental conditions.
What operating conditions does it tolerate?
It operates from -20 to +80°C without icing, at speeds from 1mm to 1m/s, with humidity below 95% RH.

Overview

The CNTD CWLCA2-2 is a compact limit switch designed to detect position and trigger control circuits in machinery. A roller lever actuator rides along cams, stops or moving machine parts, so the switch changes state at a defined point in a cycle. The 1NO+1NC contact arrangement provides one normally open and one normally closed circuit from a single device, which simplifies wiring when you need both a signal and an interlock.

Key Features

  • Double-circuit contacts: 1NO+1NC configuration covers signal and complementary switching in one housing.
  • Roller lever actuator: provides smooth, consistent operation against moving machine components.
  • Cast aluminium body: gives the switch high mechanical strength for industrial environments.
  • Sealed construction: IP66 protection level resists water and oil ingress.
  • Double spring contact mechanism: built-in contact box supports a long mechanical service life.
  • Compact size: fits into space-limited machine and panel installations.

Specifications Explained

The 6A at 250V rating defines the load the contacts can switch, making this model suitable for medium-power control circuits rather than heavy motor loads. The 1NO+1NC contacts mean the switch can close one circuit and open another at the same actuation point, useful for start/stop logic or safety interlocks.

Electrical life is rated at 500,000 operations or more, with contact resistance of 25mΩ maximum at initial value and insulation resistance of 100mΩ minimum at 500VDC. The switch operates at speeds from 1mm to 1m/s and handles up to 30 electrical operations per minute. Ambient temperature range is -20 to +80°C without icing, and humidity should stay below 95% RH.

Compatibility and Requirements

Plan for a 250V circuit rated up to 6A and wire the normally open and normally closed contacts according to your control logic. The roller lever must be positioned so the machine part strikes it within its travel range. Mounting hardware and electrical connectors are not included, so confirm your panel or bracket arrangement before installation.

Typical Uses

  • Conveyor position and end-of-travel detection
  • Automated machinery cycle control
  • Door, gate and guard position sensing
  • General industrial control panels

What's in the Box

1 x CNTD CWLCA2-2 250V Compact Roller Lever Limit Switch (1NO+1NC).

Quick specs

Manufacturer
CNTD
Voltage Rating (V)
250
Current Rating (A)
6
Model No. / Name
CWLCA2 2
Contact Configuration
1NO+1NC
Shipping Weight
0.01 kg
See all specifications