Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; power consumption (mw) 0.3; additional specs. Alarm Current (mA): 50, Audibility (dB): 85 ( at 1m distance ).

Key Highlights

  • Item Type: Gas Sensor
  • Power Consumption (mW): 0.3
  • Additional Specs.: Alarm Current (mA): 50, Audibility (dB): 85 ( at 1m distance )

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGas Sensor
Power Consumption (mW)0.3
Additional Specs.Alarm Current (mA): 50, Audibility (dB): 85 ( at 1m distance )
Shipping Weight0.13 kg
Shipping Dimensions10 × 6 × 2 cm

Overview

The CO Gas Sensor Alarm Detector with LCD Display is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Gas Sensor
  • Power Consumption (mW): 0.3
  • Additional Specs.: Alarm Current (mA): 50, Audibility (dB): 85 ( at 1m distance ) (your supply must deliver at least this much current)
  • Shipping Weight: 0.13 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 6 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector is a perfect item for protecting your family from the dangers of carbon monoxide. It provides Advanced level of protection; easy to read with the digital display, even in low light conditions. CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector displays the level of carbon monoxide the unit is sensing. Note: The available display is in Gray color. Elecvora.in have different variety of gas Sensors; for more gas sensors Click here.
Features :
  1. LCD Displayer (optional): 4 digits LCD displayer
  2. Audibility: 85dB ( at 1m distance ),
  3. Frequency 3 - 0.5KHZ
  4. Standby Current: <50μA
  5. Alarm Current: <50mA
  6. Standby Mode: Green Led flashes once every 30 seconds
  7. Alarm Mode: Red Led quickly flashes 4 times with unit chirping every 5 seconds, then repeat,
  8. Low-battery Indicator: Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb(low battery) on LCD.
    1. Sensitivity/Alarm Time:
  9.                Within 60~90 minutes at 50ppm CO concentration;
                   Within 10~40 minutes at 100ppm CO concentration;
                   With in 3 minutes at 300ppm CO concentration.
  10. Power consumption: 0.3mW.
  11. Size: 10 x 4cm.
  12. Powered By: 3 x AA Batteries (Not included).

How does it Work?

  1. Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is press.
  2. Red LED: When a dangerous level of carbon monoxide will detect the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
  3. Test/Reset button is designed for weekly testing if it works properly and reset the unit during CO alarm.
  4. Alerts users when batteries need to replace.
  5. This alarm recommends mounting on a wall surface.

Package Includes : 

1 x CO Gas Sensor Detector Carbon Monoxide Poisoning Alarm Detector With LCD Display. 1 x Accessories set.

Quick specs

Item Type
Gas Sensor
Power Consumption (mW)
0.3
Additional Specs.
Alarm Current (mA): 50, Audibility (dB): 85 ( at 1m distance )
Shipping Weight
0.13 kg
Shipping Dimensions
10 × 6 × 2 cm
See all specifications

Explore more