
1 / 3 · Click to enlarge
AI Summary
A compact CP2112-based USB to I2C bridge module with 8 programmable GPIOs and a 512-byte SMBus buffer. It provides plug-and-play USB 2.0 full-speed communication for embedded debugging, sensor interfacing and prototyping.
Key Highlights
- CP2112 chipset for USB to I2C bridging
- USB 2.0 full-speed interface at 12 Mbps
- Up to 8 programmable GPIO pins
- 512-byte SMBus data buffer
- Configurable clock output from 48 MHz to 94 kHz
- Plug-and-play on Windows, Linux and macOS
Ideal For
- Embedded developers debugging I2C buses
- Makers interfacing sensors to a PC
- Students learning I2C communication
- Engineers building industrial control prototypes
- Technicians needing a portable USB-to-I2C dongle
Buying Tip
Confirm that your target device uses 3.0V–3.6V I2C logic, since the board's I2C side is self-powered at that level and is not 5V tolerant.
Elecvora expert review
Our verdict
A practical, no-fuss USB-to-I2C bridge that covers the essentials for embedded debugging and sensor work. Its compact size and plug-and-play support make it easy to keep on hand for quick tests.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple plug-and-play setup on major operating systems
- Eight GPIO pins add useful flexibility
- Wide operating temperature range
- Small and lightweight for portable use
Cons
- I2C side is limited to 3.0V–3.6V logic
- Requires wiring to the target, no cable included
- Configuration software may be needed for advanced features
Best for
Embedded developers and makers who need a reliable USB-to-I2C link for debugging and prototyping.
Not ideal for
Users who need a 5V-tolerant I2C interface or a ready-made cable assembly.
Specifications
| Shipping Weight | 0.005 kg |
|---|---|
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x CP2112 Debug Board USB to I2C Communication Module Micro
- 1 x Header Pin
Frequently Asked Questions
What is the CP2112 Debug Board used for?
Which operating systems are supported?
What voltage does the I2C side use?
How many GPIO pins are available?
What is included in the package?
What is the operating temperature range?
Overview
The CP2112 Debug Board is a micro-sized USB to I2C communication module designed to add reliable I2C connectivity to a computer through a standard USB port. At its core is the CP2112 bridge chip, which handles the conversion between USB 2.0 full-speed signalling and the I2C bus. This makes the board a straightforward choice for engineers, makers and students who need to talk to sensors, EEPROMs, port expanders or other I2C devices from a PC without building a custom interface.
The module is compact and lightweight, so it fits easily into crowded test setups or can be carried in a tool kit. It is intended for debugging, prototyping and industrial control work where a dependable USB-to-I2C link is required.
Key Features
- CP2112 bridge chipset for USB to I2C conversion
- USB 2.0 full-speed communication at 12 Mbps
- Up to 8 programmable GPIO pins for auxiliary control
- 512-byte SMBus buffer to support data transfers
- Configurable clock output from 48 MHz to 94 kHz
- Wide operating temperature of -40°C to +85°C
- Plug-and-play support on Windows, Linux and macOS
Specifications Explained
The USB side operates at full speed (12 Mbps), which is ample for typical I2C transactions and debugging tasks. The board is powered from the USB bus at 4.0V to 5.25V, while the I2C side is self-powered and runs at 3.0V to 3.6V, so you should check that your target device matches this logic level. The 512-byte SMBus buffer helps manage data bursts without overrunning the bus. Eight GPIO pins give you extra digital control lines for signals such as reset or interrupt. The clock output can be set anywhere from 48 MHz down to 94 kHz, useful when a target needs an external reference. With an operating range of -40°C to +85°C, the module is suitable for both normal lab conditions and more demanding environments.
Compatibility and Requirements
The CP2112 Debug Board is compatible with Windows, Linux and macOS. It requires a free USB port and, for I2C connections, wiring to your target device's SDA, SCL, ground and, if needed, the 3.0V–3.6V supply rail. No additional drivers are mentioned beyond the plug-and-play support for these operating systems.
Typical Uses
- Debugging I2C buses in embedded systems
- Interfacing sensors and peripherals to a PC
- Prototyping and development work
- Industrial control and data logging projects
- Acting as a USB dongle for I2C communication
What's in the Box
The package includes one CP2112 Debug Board USB to I2C Communication Module Micro and one header pin.













