
1 / 4 · Click to enlarge
AI Summary
The CUAV C-RTK 9Ps is a centimeter-level RTK GNSS module built on the u-blox ZED-F9P receiver with four concurrent constellations and an IST8310 compass. It delivers 20Hz RTK positioning for Pixhawk-based drones, and two units can provide compass-free heading.
Key Highlights
- 184-channel u-blox ZED-F9P receiver with four concurrent GNSS constellations
- RTK accuracy of 0.01m + 1ppm CEP with survey-in under 60 seconds
- Dual-module heading support replaces a magnetic compass in noisy environments
- 20Hz RTK navigation update rate for responsive precision flight
- Active anti-jamming and advanced anti-spoofing protection built in
- Wide 4.5V to 6V input and -40°C to +85°C operating range
Ideal For
- Drone builders running Pixhawk, PX4 or ArduPilot autopilots
- Agricultural and mapping operators needing centimeter-level positioning
- Integrators flying near power lines or other magnetically noisy areas
- Teams wanting compass-free heading from a dual-GNSS setup
- Field operators working in extreme hot or cold conditions
Buying Tip
Plan for two modules if you need RTK corrections or GPS heading, since a single C-RTK 9Ps provides only one half of the base-rover pair.
Elecvora expert review
Our verdict
The C-RTK 9Ps is a well-specified RTK module for serious precision work, pairing the proven ZED-F9P receiver with a compass and robust interference handling. It rewards buyers who plan a proper base-rover or dual-module installation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Centimeter-level RTK accuracy with fast sub-60-second survey-in
- Four concurrent constellations for reliable satellite coverage
- Dual-module heading option removes compass interference issues
- Wide voltage and temperature range for harsh environments
- Anti-jamming and anti-spoofing features built in
Cons
- PPK post-processing is not supported
- GPS heading requires a second C-RTK 9Ps module
- Maximum update rate depends on the constellation configuration
Best for
Precision Pixhawk, PX4 and ArduPilot builds needing RTK positioning or compass-free heading
Not ideal for
Pilots wanting a simple low-cost GPS without RTK base or rover setup
Specifications
| Item Type | Module |
|---|---|
| Receiver Type | 184 channel ZED-F9P(ublox) |
| Compass | IST8310 |
| GNSS | GPS, Beidou, Galileo, GLONASS |
| No. of Concurrent GNSS | 4 |
| Nav. update rate | RTK 20Hz RAW 25Hz; PVT 25Hz (The maximum limit is related to the concurrency setting) |
| Position Accuracy (Meter) | RTK:0.01m+1ppm CEP GPS:1.5m CEP; SBAS:1.0m CEP |
| RTK Surveyin-time | RTK<60s |
| Acquisition | Cold starts<24s Hot starts<1s |
| Sensitivity (dBm) | Cold starts –148 dBm Hot starts –157 dBm Reacquisition –160 dBm |
| Anti-jamming | Active CW detection and removal Onboard band pass flter |
| Additional Specs. | Advanced anti-spoofing algorithms |
| Antenna Gain | Rover:2dBi Base:5dBi |
| PPK | not support |
| GPS heading | Support (requires two C-RTK 9Ps); heading accuracy: 0.4edg (reference value) |
| UART | 2 |
| USB | 1 |
| Protocol | NMEA, UBX binary, RTCM 3.x |
| Operating Voltage | 4.5V to 6V |
| Operating Temperature (°C) | –40°C to +85°C |
| Shipping Weight | 1.179 kg |
| Shipping Dimensions | 28 × 23 × 16 cm |
Frequently Asked Questions
Does one module provide RTK positioning on its own?
Can I use it without a magnetic compass?
What input voltage does the module need?
Which autopilots is it compatible with?
What is the operating temperature range?
Does it support PPK post-processing?
Overview
The CUAV C-RTK 9Ps is a high-precision GNSS positioning module for drone flight controllers. Inside is a 184-channel u-blox ZED-F9P receiver paired with an IST8310 compass, giving the module concurrent access to GPS, BeiDou, Galileo and GLONASS. Used as a base and rover pair, the two units form a real-time kinematic system that supplies centimeter-level differential corrections to the autopilot.
Because the base and rover share the same hardware design, a unit can be reconfigured from one role to the other by changing a few parameters. The rover antenna has 2dBi gain, while the base antenna offers 5dBi.
Key Features
- Centimeter-level RTK: 0.01m + 1ppm CEP positioning accuracy, with standard GPS at 1.5m CEP and SBAS at 1.0m CEP.
- Fast convergence: RTK survey-in completes in under 60 seconds, with cold starts under 24 seconds and hot starts under 1 second.
- Dual-module heading: Two C-RTK 9Ps units can provide GPS heading with a reference accuracy of 0.4 degrees, removing reliance on a magnetic compass.
- Robust signal handling: Active continuous-wave detection and removal, an onboard band-pass filter and advanced anti-spoofing algorithms.
- High sensitivity: -148 dBm on cold start, -157 dBm on hot start and -160 dBm for reacquisition.
Specifications Explained
The 20Hz RTK update rate and 25Hz raw and PVT rates keep position data flowing quickly enough for precise automated flight, though the maximum rate depends on how many constellations are enabled at once. Sensitivity figures indicate how weak a satellite signal the module can still acquire and hold, which matters when flying near obstacles or under partial sky cover.
Two UART ports and one USB port give integrators flexible wiring options, and the module speaks NMEA, UBX binary and RTCM 3.x, so it works with common ground station and correction workflows. Power input of 4.5V to 6V and an operating range of -40°C to +85°C make it suitable for cold and hot field conditions alike. Note that PPK post-processing is not supported.
Compatibility and Requirements
The module is designed for open-source autopilots such as PX4 and ArduPilot, including Pixhawk-class flight controllers. A complete RTK setup requires two modules, one configured as base and one as rover, each with its matching antenna. Heading estimation also requires two C-RTK 9Ps units.
Typical Uses
Typical applications include precision take-off, landing and waypoint missions, agricultural operations, aerial performance work and any flight where stable heading matters more than a compass reading, such as operating near power lines.




Quick specs
- Item Type
- Module
- Receiver Type
- 184 channel ZED-F9P(ublox)
- Compass
- IST8310
- GNSS
- GPS, Beidou, Galileo, GLONASS
- No. of Concurrent GNSS
- 4
- Nav. update rate
- RTK 20Hz RAW 25Hz; PVT 25Hz (The maximum limit is related to the concurrency setting)



















