Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The CUAV Nora+ is a compact H7-based flight controller with three IMUs, an RM3100 compass and built-in shock absorption. Its intelligent IMU failover and dual barometers make it a dependable core for multirotor builds.

Key Highlights

  • STM32H743 Cortex-M7 processor running at 480 MHz with 2 MB Flash
  • Three IMU sets with intelligent failover for sensor redundancy
  • Built-in industrial-grade RM3100 compass and dual MS5611 barometers
  • Patented internal shock absorption and temperature compensation
  • 14 PWM outputs with DShot plus dual CAN and five UART ports
  • Compact 85.5 x 42.0 x 33.0 mm body weighing 91 g

Ideal For

  • Multirotor builders wanting triple-IMU redundancy
  • Camera and mapping drone projects needing stable sensing
  • Large custom airframes with CAN peripherals
  • Pilots upgrading to an H7-based controller
  • Builders who prefer a bundled power module and cabling

Buying Tip

Confirm your airframe's power setup can supply 4.5-5.5 V to the controller and plan your CAN peripheral layout before mounting, since the included PMU Lite is the intended power source.

Elecvora expert review

Our verdict

The Nora+ packs serious redundancy and sensing hardware into a small, light board, and the bundled power module and cabling reduce build friction. It is a sensible choice for builders who value sensor failover and clean integration over minimal cost.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three IMU sets with intelligent failover
  • RM3100 compass and dual barometers
  • Built-in shock absorption and temperature compensation
  • Generous I/O including dual CAN and five UARTs
  • Includes CAN PMU Lite, CAN extension board and cables

Cons

  • Requires a regulated 4.5-5.5 V supply
  • Soldering and wiring are needed for installation
  • Configuration software knowledge is required

Best for

Multirotor builders who want sensor redundancy in a compact frame

Not ideal for

Beginners looking for a plug-and-play toy drone controller

Specifications

Shipping Weight0.340 kg
Shipping Dimensions15 × 15 × 5 cm

What's in the box

  • 1 x CUAV Nora+ Flight Controller
  • 2 x I2C / CAN Cable
  • 1 x ADC 3.3 Cable
  • 1 x RSSI Cable (X7 Series)
  • 1 x CAN PMU Lite Power Module
  • 1 x Dupont Cable
  • 1 x CAN Extension Board
  • 1 x PW-Link Module
  • 1 x USB Type-C Cable
  • 1 x Memory Card

Frequently Asked Questions

What processor does the Nora+ use?
It uses an STM32H743 Arm Cortex-M7 processor at 480 MHz with 2 MB Flash and 1 MB RAM.
How many IMUs does it have?
Three IMU sets are fitted, using ICM-42688-P, ICM-20689 and BMI088 sensors, with intelligent failover support.
What input voltage does it need?
The rated voltage is 4.5-5.5 V, and USB voltage should be 4.75-5.25 V. The included CAN PMU Lite power module is the intended power source.
Which RC protocols are supported?
RC input supports PPM, SBUS and DSM, with RSSI available as PWM or 3.3 V analog input.
What is included in the box?
The package includes the flight controller, two I2C/CAN cables, an ADC 3.3 cable, an RSSI cable, a CAN PMU Lite power module, a Dupont cable, a CAN extension board, a PW-Link module, a USB Type-C cable and a memory card.
What are the operating conditions?
It operates from -20°C to +85°C with humidity of 5% to 95% non-condensing.

Overview

The CUAV Nora+ is a compact flight controller designed for multirotor builders who want sensor redundancy and clean signal performance in a small footprint. At its core is an STM32H743 Arm Cortex-M7 processor running at 480 MHz with 2 MB of Flash and 1 MB of RAM, giving the firmware headroom for demanding flight profiles and peripheral-heavy setups.

Three independent IMU sets are fitted, each pairing an accelerometer and gyroscope, and the board supports intelligent failover between them. CUAV's patented shock absorption is built into the body, while a temperature compensation system helps keep sensor readings consistent as conditions change. An RM3100 industrial-grade compass and two MS5611 barometers complete the sensing package.

Key Features

  • Triple IMU redundancy: ICM-42688-P, ICM-20689 and BMI088 sensor sets with automatic failover.
  • RM3100 compass: industrial-grade magnetometer for heading accuracy.
  • Dual barometers: two MS5611 sensors for altitude measurement.
  • Built-in shock absorption: reduces vibration reaching the sensors.
  • Temperature compensation: supports stable readings across the -20°C to +85°C range.
  • Rich I/O: 14 PWM outputs with DShot, 5 UARTs, 6 I2C ports, 2 CAN buses and 2 USB ports.

Specifications Explained

The H7 processor matters because it handles fast control loops and multiple peripherals at once. The three IMU sets are the headline feature: if one sensor behaves unexpectedly, the controller can switch to another, which is valuable on larger or more expensive airframes.

Fourteen PWM outputs with DShot support cover everything from simple quadcopters to complex multirotor layouts, while two CAN buses allow connection of CAN peripherals such as the included CAN PMU Lite power module. Five UARTs and six I2C ports leave room for GPS units, telemetry and expansion boards. Rated input is 4.5-5.5 V, and the servo rail accepts 0-10 V. The board measures 85.5 x 42.0 x 33.0 mm and weighs 91 g.

Compatibility and Requirements

The Nora+ accepts RC input over PPM, SBUS or DSM and provides one RSSI input for PWM or 3.3 V analog signals. Two GPS ports are available, with UART4 usable as a second GPS input. A safety switch, debug port and JTAG header are provided. Power must be supplied within the 4.5-5.5 V rated range, and the included CAN PMU Lite power module is the intended power source. A micro memory card is included for logging.

Typical Uses

This controller suits multirotor builds that benefit from sensor redundancy, including camera platforms, mapping aircraft and larger custom frames. The compact size and light weight also make it reasonable for builds where space and payload matter.

What's in the Box

  • 1 x CUAV Nora+ Flight Controller
  • 2 x I2C / CAN Cable
  • 1 x ADC 3.3 Cable
  • 1 x RSSI Cable (X7 Series)
  • 1 x CAN PMU Lite Power Module
  • 1 x Dupont Cable
  • 1 x CAN Extension Board
  • 1 x PW-Link Module
  • 1 x USB Type-C Cable
  • 1 x Memory Card

Quick specs

Shipping Weight
0.340 kg
Shipping Dimensions
15 × 15 × 5 cm
See all specifications