Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This breakout board is a good fit for makers, students and electronics hobbyists. Main specs: charging current 0.041666667; input voltage (v) 3.3-4.2 V; length (mm) 30. Check that your power source supplies 10 V before connecting it.

Key Highlights

  • Charging Current: 0.041666667
  • Input Voltage (V): 3.3-4.2 V
  • Length (mm): 30

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Max. Working Voltage (V)10 V
Charging Current0.041666667
Input Voltage (V)3.3-4.2 V
Length (mm)30
Width (mm)20
Weight (g)6
Shipping Weight0.008 kg
Shipping Dimensions7 × 4 × 1 cm

Overview

The D1 Key Expansion Board 1 Button Shield is listed in our breakout board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Max. Working Voltage (V): 10 V (match this to your power supply; too high a voltage can damage the part)
  • Charging Current: 0.041666667 (check which plug or cable it needs)
  • Input Voltage (V): 3.3-4.2 V (match this to your power supply; too high a voltage can damage the part)
  • Length (mm): 30 (measure your mounting space before ordering)
  • Width (mm): 20 (measure your mounting space before ordering)
  • Weight (g): 6 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.008 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 7 × 4 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a D1 Key Expansion Board 1 Button Shield. This Button shield is commonly used with a great variety of applications. By default, the button is connected to the D3 I/O port on the WiFi D1 mini. If you wish to use another I/O port, just cut off the connection to D3 and solder it to another pad, as needed.

Features:

  1. The button is connected to the D3 I/O port on the WiFi D1 mini.
  2. This button is used to Control light operations.

Package Includes:

1 x D1 Key Expansion Board 1 Button Shield

1 x Berg Pins

Quick specs

Max. Working Voltage (V)
10 V
Charging Current
0.041666667
Input Voltage (V)
3.3-4.2 V
Length (mm)
30
Width (mm)
20
Weight (g)
6
See all specifications