Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact optocoupler-isolated MOSFET module that replaces mechanical relays for switching motors, solenoids, and other loads. It accepts 3V or 5V control signals with high-level start, low-level stop, and PWM speed regulation.

Key Highlights

  • 40V 50A MOS tube handles demanding low-voltage loads
  • Optocoupler isolation protects control signals from interference
  • Accepts 3V or 5V high-level trigger signals
  • PWM input enables motor speed regulation
  • Compact 23mm x 16mm board with 2mm mounting holes
  • Solder terminals or direct wire for input and output

Ideal For

  • Makers and hobbyists building Arduino or microcontroller projects
  • Robotics enthusiasts needing motor on/off and PWM speed control
  • Automation technicians switching solenoid valves
  • DIYers replacing noisy or worn mechanical relays
  • Students learning about MOSFET switching and isolation

Buying Tip

Check that your load's voltage and current stay well below the 40V 50A rating, and remember the module needs a separate power supply for the device you are switching.

Elecvora expert review

Our verdict

The D4184 MOSFET module is a practical, no-frills solution for replacing mechanical relays in low-voltage projects. Its optocoupler isolation and PWM capability make it more versatile than a standard relay for motor control.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Solid-state switching with no moving parts
  • Optocoupler isolation reduces interference
  • Supports PWM for speed control
  • Compact size and easy mounting

Cons

  • Requires soldering or terminals for connections
  • Load power supply not included
  • Maximum ratings must not be exceeded

Best for

Low-voltage motor and solenoid switching in microcontroller projects

Not ideal for

High-power or mains-voltage applications

Specifications

Model No. / NameD4184
MOS tube40V 50A
Dimensions (L x W x H) mm23mm X 16mm
Mounting Hole Diameter (mm)2mm
Shipping Weight0.015 kg
Shipping Dimensions3 × 2 × 2 cm

What's in the box

  • 1 x D4184 MOSFET Control Module Replacement Relay

Frequently Asked Questions

What control signal voltage does the module accept?
The module accepts a 3V or 5V control signal, making it compatible with most microcontrollers and control boards.
Can I use this module to control a motor's speed?
Yes, the module supports PWM input, which allows you to regulate the speed of a connected motor by varying the duty cycle.
Does the module include a power supply for the load?
No, the module only switches the load. You must provide a separate power supply suitable for your motor or solenoid.
How do I connect wires to the module?
You can solder wires directly to the board's pads or use terminals. The input side is also compatible with breadboards for easy testing.
What is the maximum voltage and current the module can handle?
The MOS tube is rated for 40V and 50A, but it is good practice to stay well below these limits to ensure reliable operation.
Is the module isolated from the control signal?
Yes, it uses optocoupler isolation to separate the control signal from the load power, which helps reduce interference.

Overview

The D4184 MOSFET Control Module is a solid-state replacement for mechanical relays in low-voltage switching tasks. At its heart is a 40V 50A MOS tube that manages the connected load, while an optocoupler isolates the control signal from the output side. This isolation helps prevent electrical interference from the load from disturbing the microcontroller or control board sending the signal. The module responds to a 3V or 5V signal: a high level turns the load on, a low level turns it off, and a PWM signal can be used for speed regulation. Measuring 23mm by 16mm with 2mm mounting holes, it fits neatly into tight builds and can be secured with screws or standoffs.

Key Features

  • Optocoupler isolation separates the control signal from the load power for cleaner, more stable operation.
  • 40V 50A MOS tube provides solid-state switching without the moving parts of a relay.
  • 3V or 5V signal compatibility works with common microcontrollers and control boards.
  • High-level start, low-level stop logic is straightforward to implement in code or with a switch.
  • PWM speed regulation lets you control motor speed rather than just on/off.
  • Flexible wiring — solder to the board directly or use terminals; the input side is breadboard-friendly.

Specifications Explained

The 40V 50A MOS tube rating indicates the maximum voltage and current the module is designed to handle. Always stay well within these limits and account for the load's startup current. The 3V or 5V signal requirement means the control side expects logic-level voltages common to many microcontrollers; check that your board outputs the correct level. Optocoupler isolation is a key advantage: it electrically separates the control and load circuits, reducing the chance of noise or voltage spikes affecting your control electronics. The 2mm mounting holes accept small screws for secure mounting. The compact 23mm x 16mm footprint helps in space-constrained projects.

Compatibility and Requirements

The module is compatible with microcontrollers and control boards that provide a 3V or 5V signal. It does not include a separate power supply for the load; you must provide the appropriate voltage and current for your device. Wiring can be done by soldering to the board's pads or by using terminals, and the input side can be plugged into a breadboard for testing. No additional drivers are required, but ensure your control signal source can supply the small current needed by the optocoupler input.

Typical Uses

This module is widely used to control the start and stop of DC motors, solenoid valves, and other branch equipment. It is also suitable for PWM speed regulation of motors in robotics, automation projects, and DIY builds. Because it replaces mechanical relays, it is a good choice for applications that require frequent switching or silent operation.

What's in the Box

Package includes: 1 x D4184 MOSFET Control Module Replacement Relay.

Quick specs

Model No. / Name
D4184
MOS tube
40V 50A
Dimensions (L x W x H) mm
23mm X 16mm
Mounting Hole Diameter (mm)
2mm
Shipping Weight
0.015 kg
Shipping Dimensions
3 × 2 × 2 cm
See all specifications