
1 / 14 · Click to enlarge
At a glance
Made by DALY, this product is a good fit for makers, students and electronics hobbyists. Main specs: charging voltage(v) LiFePO4: N (Battery string)*3.65V; discharge current (a) 150-200; discharge overcurrent protection value (a) 225-300. Check that your power source supplies LiFePO4: N (Battery string)*3.65V before connecting it.
Key Highlights
- Wireless connection
- Charging voltage(V): LiFePO4: N (Battery string)*3.65V
- Discharge current (A): 150-200
- Discharge overcurrent protection value (A): 225-300
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Charging voltage(V) | LiFePO4: N (Battery string)*3.65V |
|---|---|
| Discharge current (A) | 150-200 |
| Discharge overcurrent protection value (A) | 225-300 |
| Charging current (A) | 150-200 |
| Charge overcurrent protection value (A) | 225-300 |
| Main circuit on-resistance (mΩ) | <10 |
| Equalization turn-on voltage (V) | LiFePO4: 3.4 (Can be set up) |
| Equalize opening differential pressure (mV) | 50(Can be set up) |
| Balance current (mA) | LiFePO4: 100±30 |
| Short circuit protection conditions | External Load short circuit |
| Short circuit protection delay(uS) | 10-500 The actual test is subject to the customer's battery sent back to our company for testing |
| Short circuit protection released | Remove load release |
| Protection voltage(V) | LiFePO4: 3.75±0.05 (Can be set up) |
| Protection delay(S) | 1±0.8 |
| Recovery voltage(V) | LiFePO4: 3.65±0.05 |
| Protection voltage(V) | LiFePO4: 2.2±0.05 (Can be set up) |
| Protection delay(S) | 1±0.8 |
| Recovery voltage(V) | LiFePO4: 2.3±0.05 |
| Protection delay(S) | 1±0.8 |
| Release condition | Removing the load is lifted |
| Current consumption | Working current(mA) < 20 |
| Operating temperature(℃) | charging: -35~75 discharge: -35~75 (can be set up) |
| Storage temperature(℃) | -40~85 |
| Resting current(uA) | <600 |
| Sleep time(S) | 3600 |
Overview
The Daly BMS LiFePO4 Smart Board Iron Lithium Battery Protection Board with Balance+bluetooth+RS485+CAN M-type 4~24 Series with Parallel Module 3.65V, made by DALY, is listed in our range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Charging voltage(V): LiFePO4: N (Battery string)*3.65V (note the battery type so you can order spares or the right charger)
- Discharge current (A): 150-200 (your supply must deliver at least this much current)
- Discharge overcurrent protection value (A): 225-300 (your supply must deliver at least this much current)
- Charging current (A): 150-200 (check which plug or cable it needs)
- Charge overcurrent protection value (A): 225-300 (your supply must deliver at least this much current)
- Main circuit on-resistance (mΩ): <10
- Equalization turn-on voltage (V): LiFePO4: 3.4 (Can be set up) (match this to your power supply; too high a voltage can damage the part)
- Equalize opening differential pressure (mV): 50(Can be set up)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Specification:
Installation and wiring in 3 easy steps:
Step 1: Solder the sampling cables: The first cable in black in the sampling cable set is connected to the negative terminal of the battery, the second cable (red) is connected to the positive terminal of the first string of batteries, and the third cable (red) is connected to the positive terminal of the second string of batteries. And so on, until all cables are connected.
Step 2: Check the cables: After connecting the cables, measure the voltage between two adjacent cables starting from the header to make sure there are no wrong connections or missing connections.
Step 3: Connect the output wires: Connect the B- wire of BMS to the total negative terminal of the battery pack, and then plug the sampling cable to BMS. After activating the BMS, make sure that the voltage (battery voltage) between B+ & B- and the voltage between P+ & P- are consistent.

Activate the BMS:
The BMS is automatically activated when used for the first time.
If the BMS is dormant, it can be activated in 4 ways:
(Before the bms is activated, please make sure that the bms, the cable, the battery are connected correctly, and the NTC is connected with the bms.)
1. Use key switch.
2. Press buttons on bluetooth module or SOC indicator.
3. Using CAN/RS485 communication or Bluetooth connect to Mobile APP.
4. Charge or discharge the battery.
Package includes:
1 x Smart BMS M-type 1 x Cable 1 x bluetooth 1 x NTC 1 x CAN/485 5pin 1 x B-P-Output line













Quick specs
- Charging voltage(V)
- LiFePO4: N (Battery string)*3.65V
- Discharge current (A)
- 150-200
- Discharge overcurrent protection value (A)
- 225-300
- Charging current (A)
- 150-200
- Charge overcurrent protection value (A)
- 225-300
- Main circuit on-resistance (mΩ)
- <10












