Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DALY, this product is a good fit for everyday home and hobby use. Main specs: rated discharge current (v) Li-ion: N(Battery string)*4.2V; charging voltage (a) 40-60; discharge overcurrent protection value (a) 60-90. Check that your power source supplies 40-60 before connecting it.

Key Highlights

  • Wireless connection
  • Small and easy to carry or mount
  • Rated discharge current (V): Li-ion: N(Battery string)*4.2V
  • Charging voltage (A): 40-60
  • Discharge overcurrent protection value (A): 60-90

Ideal For

  • Room or desk lighting
  • Workbench lighting
  • Outdoor use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Rated discharge current (V)Li-ion: N(Battery string)*4.2V
Charging voltage (A)40-60
Discharge overcurrent protection value (A)60-90
Charging current (A)40-60
Charge overcurrent protection value (A)60-90
Main circuit on-resistance (mΩ)<20
Equalization turn-on voltage (V)Li-ion:4.0 (Can be set up)
Equalize opening differential pressure (mV)20(Can be set up)
Balance current (mA)Li-ion: 100±15
Short circuit protection conditionsExternal Load short circuit
Short circuit protection delay(uS)10-500 The actual test is subject to the customer's battery sent back to our company for testing
Short circuit protection releasedRemove load release
Protection voltage(V)Li-ion: 4.25±0.05 (Can be set up)
Protection delay(S)1±0.8
Recovery voltage(V)Li-ion: 4.15±0.05
Protection voltage(V)Li-ion: 2.7±0.05 (Can be set up)
Protection delay(S)1±0.8
Recovery voltage(V)Li-ion: 2.8±0.05
Protection delay(S)1±0.8
Release conditionRemoving the load is lifted
Current consumption: Working current(mA)< 15
Operating temperature(℃)charging:-35~75 discharge: -35~75 (can be set up)
Storage temperature(℃)-40~85
Resting current(uA)< 500
Sleep time(S)3600

Overview

The Ternary Lithium Battery Protection H-type 3S-16S 40A60A Li-ion 4.2V Portable Mobile Power Solar with Balance+Bluetooth+RS485+CAN Street Light Battery Protection Board, made by DALY, is listed in our range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Rated discharge current (V): Li-ion: N(Battery string)*4.2V (note the battery type so you can order spares or the right charger)
  • Charging voltage (A): 40-60 (check which plug or cable it needs)
  • Discharge overcurrent protection value (A): 60-90 (your supply must deliver at least this much current)
  • Charging current (A): 40-60 (check which plug or cable it needs)
  • Charge overcurrent protection value (A): 60-90 (your supply must deliver at least this much current)
  • Main circuit on-resistance (mΩ): <20
  • Equalization turn-on voltage (V): Li-ion:4.0 (Can be set up) (match this to your power supply; too high a voltage can damage the part)
  • Equalize opening differential pressure (mV): 20(Can be set up)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Specification:


Installation and wiring in 3 easy steps:

Step 1: Solder the sampling cables: The first cable in black in the sampling cable set is connected to the negative terminal of the battery, the second cable (red) is connected to the positive terminal of the first string of batteries, and the third cable (red) is connected to the positive terminal of the second string of batteries. And so on, until all cables are connected.
Step 2: Check the cables: After connecting the cables, measure the voltage between two adjacent cables starting from the header to make sure there are no wrong connections or missing connections.
Step 3: Connect the output wires: Connect the B- wire of BMS to the total negative terminal of the battery pack, and then plug the sampling cable to BMS. After activating the BMS, make sure that the voltage (battery voltage) between B+ & B- and the voltage between P+ & P- are consistent.

Activate the BMS:

The BMS is automatically activated when used for the first time.
If the BMS is dormant, it can be activated in 4 ways:
(Before the bms is activated, please make sure that the bms, the cable, the battery are connected correctly, and the NTC is connected with the bms.)

1. Use key switch.
2. Press buttons on bluetooth module or SOC indicator.
3. Using CAN/RS485 communication or Bluetooth connect to Mobile APP.
4. Charge or discharge the battery.


Package includes:


1 x Smart BMS
1 x Cable
1 x bluetooth
1 x NTC
1 x CAN/485 5pin



Product Safety Information

Quick specs

Rated discharge current (V)
Li-ion: N(Battery string)*4.2V
Charging voltage (A)
40-60
Discharge overcurrent protection value (A)
60-90
Charging current (A)
40-60
Charge overcurrent protection value (A)
60-90
Main circuit on-resistance (mΩ)
<20
See all specifications

Explore more