Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DALY, this product is a good fit for people who spend time outdoors. Main specs: charge voltage Li-ion: N(strings)*4.2V; discharge current (a) 15; charge current (a) 8. Check that your power source supplies Li-ion: N(strings)*4.2V before connecting it.

Key Highlights

  • Charge voltage: Li-ion: N(strings)*4.2V
  • Discharge current (A): 15
  • Charge current (A): 8

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Charge voltageLi-ion: N(strings)*4.2V
Discharge current (A)15
Discharge overcurrent protection value(A)50 ±10
Charge current (A)8
Charge overcurrent protection value(A)20 ±3
Main Circuit Conduct Inner resistance<=20mΩ
Over charge protectionBalance voltage
Detect voltage : Li-ion: 4.25±0.05VDetect voltage: Li-ion: 4.13V
Protection delay: 1SRelease voltage: Li-ion: 4.13V
Release voltage: Li-ion: 4.15±0.05VBalance current: 30±5mA
Over discharge protectionOver Discharge current protection
Detect voltage : Li-ion: 2.7±0.05VProtection delay: 1S
Protection delay: 1SProtection release condition:Off load
Short circuit protectionSelf Consumption
Protection conditon:Short circuit of external loadWorking current: 100~200mA
Detect delay: 200~500uS (Subject to actual test)Sleeping currentf over-discharge): 0uA
Working TempCharge: -20~55℃ Discharge: -40~70℃ (Customizable)
Working TempTemp range: -20~60℃                Storing Temp Temp range: -40~85℃

Overview

The Ternary 7S 15A-250A 7-string 24V Lithium Battery Protection Board Li-ion 4.2V Inverter Outdoor Power Supply Hardware BMS, made by DALY, is listed in our range and suits people who spend time outdoors. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Charge voltage: Li-ion: N(strings)*4.2V (match this to your power supply; too high a voltage can damage the part)
  • Discharge current (A): 15 (your supply must deliver at least this much current)
  • Discharge overcurrent protection value(A): 50 ±10 (your supply must deliver at least this much current)
  • Charge current (A): 8 (your supply must deliver at least this much current)
  • Charge overcurrent protection value(A): 20 ±3 (your supply must deliver at least this much current)
  • Main Circuit Conduct Inner resistance: <=20mΩ
  • Over charge protection: Balance voltage (match this to your power supply; too high a voltage can damage the part)
  • Detect voltage : Li-ion: 4.25±0.05V: Detect voltage: Li-ion: 4.13V (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Product Parameters:


*lf you need customized services, please consult customer service for details.



Package includes:


1 x Cable

1 x Battery Protection Board

(The appearance and weight of products with different currents are inconsistent. Please refer to the product appearance received. thank you for understanding)


Protective board connection battery wiring: * Special attention: The wire cable of different manufacturers are not same standard, please make sure to use he matching cables; the colors of B- and P- lines of different manufacturers are different, please pay attention to the B- and P- marks. 1. Remember!!! When welding sampling wire cable, do not insert the cable into the BMS. 2. The cable connects the total negative electrode B-from the fine black line. The second wire (red wire) is connected to the positive pole of the first string of batteries.Connect the positive electrode of each string of batteries in turn until the last wire cable of the total positive B+. 3. After the cable is connected, do not insert the plug directly into the BMS.First measure the voltage between each two adjacent metal terminals on the back of the plug. If it is a ternary lithium battery, the voltage should be between 3.0~4.15V, and the iron-lithium battery should be 2.5~ Between 3.6V, lithium titanate battery should be between 1.8-2.8V, make sure the voltage is correct before proceeding to the next step. 4. Receive the BMS B-line (blue thick line) to the total battery negative electro-de (B-line length should not exceed 40cm). 5. Insert the wire cable into the BMS. After the wiring is completed: 1. Measure whether the voltage of battery B+, B- is equal to the voltage of B+ and P- (that is, whether the voltage of the battery pack itself is e- qual to the voltage after passing through the protection board, if they are equal, the BMS is working normally, which can be used normally. If not, please follow Re-check the queue of the wiring above. 2. The positive electrodes of the charging and discharging end are all directly connected to the total positive pole B+ of the battery; the wiring method of the same port BMS is that the charging and discharging negative poles are connected to the P- point of the BMS; the wiring m- ethod of the branch BMS is the negative pole of charging Connected to C-, the negative electrode of discharge is connected to P-. 3. Finally, if you have any questions, please contact the customer service to help you solve it.



Product Safety Information

Quick specs

Charge voltage
Li-ion: N(strings)*4.2V
Discharge current (A)
15
Discharge overcurrent protection value(A)
50 ±10
Charge current (A)
8
Charge overcurrent protection value(A)
20 ±3
Main Circuit Conduct Inner resistance
<=20mΩ
See all specifications

Explore more