Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DC 5V driver board with a 20 mm ultrasonic oscillator on a 70 mm cable, made for building mist into mini humidifiers and DIY projects. It delivers fine, low-noise atomization from a simple low-voltage supply.

Key Highlights

  • DC 5V operation at a 2.5 W power rating
  • 20 mm oscillator diameter on a 70 mm cable
  • Compact board footprint of 41.5 by 38 mm
  • Low noise output with small fog particles
  • Stable waveform and strong corrosion resistance
  • Lightweight module at just 10 g

Ideal For

  • Makers building small DIY humidifiers
  • Hobbyists adding mist effects to high-end toys
  • Prototypers designing compact enclosure projects
  • Repairers replacing a 20 mm atomizer driver
  • Electronics learners exploring piezoelectric atomization

Buying Tip

Remember to order a USB-to-3.5 mm male jack power cable separately, since the module cannot be powered without one.

Elecvora expert review

Our verdict

A neat, low-power atomizer module for small mist builds, provided you already have the right power cable. It is a component for makers, not a plug-and-play appliance, so expect to plan wiring and enclosure space.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 41.5 by 38 mm board fits small enclosures
  • Low 2.5 W power draw at 5 VDC
  • Fine particles and low noise operation
  • Separate 20 mm oscillator on a 70 mm cable

Cons

  • Power cable is not included
  • Requires a 5 VDC supply and your own wiring
  • SMD component mounting may vary between units

Best for

DIY humidifier and toy mist projects with a 20 mm atomizer

Not ideal for

Anyone wanting a ready-to-use humidifier out of the box

Specifications

Operating Voltage (VDC)5
Power Rating2.5
Diameter (mm)Oscillator:20
Cable LengthOscillator: 70
Length (mm)41.5
Width (mm)38
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions6 × 4 × 1 cm

What's in the box

  • 1 x DC 5V Ultrasonic Humidifiers Power Circuit Board
  • 1 x Atomizing Chip

Frequently Asked Questions

What voltage does this atomizer board need?
The module is rated for 5 VDC operation at 2.5 W. Match your power supply to that voltage before connecting it.
Is the power cable included?
No. The module needs a USB-to-3.5 mm male jack power cable, which must be purchased separately.
What size atomizer plate does it work with?
It is intended for atomization plates with a 20 mm diameter, and the included oscillator matches that size.
What is in the package?
You receive one DC 5V Ultrasonic Humidifiers Power Circuit Board and Atomizing Chip. No cable or other accessories are included.
Will the board look exactly like the photo?
Actual units may vary in terms of SMD component mounting, so small differences on the board are normal.
What is the oscillator cable length?
The oscillator sits on a 70 mm cable, which gives some flexibility when placing it in your build.

Overview

This ultrasonic humidifier atomizer driver board is a compact module for turning water into fine mist in small-scale builds. The board carries the drive circuit, while a separate 20 mm piezoelectric oscillator sits at the end of a 70 mm cable. Together they form a mini atomizer that runs from a DC 5V supply at a 2.5 W power rating.

Because the circuit is small and light, it fits neatly into custom housings, prototype enclosures, and small decorative or functional devices. The design targets quiet operation, fine droplet size, and long service life, so it is a practical building block for makers rather than a finished consumer appliance.

Key Features

  • Low noise operation: the module is intended for quiet mist generation in small spaces.
  • Small fog particles: fine atomization helps mist disperse evenly.
  • Long operation life: built for repeated use in DIY humidifier builds.
  • High stability: a stable waveform supports consistent atomizer behaviour.
  • Corrosion resistance: the oscillator is designed to withstand contact with water.
  • High conversion efficiency: a 2.5 W rating keeps the module modest in power draw.

Specifications Explained

The 5 VDC operating voltage is the key figure: match your supply to it and the board can drive the oscillator as intended. The 2.5 W power rating tells you the module is a low-power device, suitable for small mist outputs rather than room-scale humidification.

The 20 mm oscillator diameter defines the atomizing disc size, and the 70 mm cable gives some separation between the board and the water contact point. The board itself measures about 41.5 by 38 mm and weighs roughly 10 g, so it mounts easily in compact projects. The oscillator is specified at 113±3 KHz with a capacitance of 3000±15% pF, which describes the electrical behaviour of the piezo element.

Compatibility and Requirements

This module is intended for atomization plates with a 20 mm diameter, so the oscillator included here matches that size. It requires a USB-to-3.5 mm male jack power cable to deliver power, and that cable is not included. Buy it separately before you begin your build.

Note that the actual SMD component mounting on the board may vary from unit to unit. Plan your enclosure and wiring with a little tolerance for that variation.

Typical Uses

  • Mini humidifiers and desktop mist projects
  • High-end toys that need a fog effect
  • DIY enclosures, prototypes, and maker experiments
  • Small decorative water features built around a 20 mm atomizer

What's in the Box

1 x DC 5V Ultrasonic Humidifiers Power Circuit Board and Atomizing Chip. The power cable is not part of the package.

Quick specs

Operating Voltage (VDC)
5
Power Rating
2.5
Diameter (mm)
Oscillator:20
Cable Length
Oscillator: 70
Length (mm)
41.5
Width (mm)
38
See all specifications