Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DC-DC boost and buck converter that produces an adjustable ±3–30V dual output from a 3.6–30V input, rated to 20W. Terminal wiring makes it quick to install and swap between projects.

Key Highlights

  • Dual adjustable output rails from +3V to +30V and -3V to -30V
  • Wide 3.6–30V input range for many low-voltage DC sources
  • 20W maximum output power for higher-demand circuits
  • Tool-free screw terminals simplify fitting and replacement
  • 68–89% conversion efficiency with 2.5 mA static current
  • Compact 59 x 32 mm board weighing only 32 g

Ideal For

  • Makers building split-supply analogue circuits
  • Electronics hobbyists working with ADC and DAC amplifiers
  • Technicians powering RS232, RS485 or RS422 bus hardware
  • DIY audio builders needing a compact adjustable rail
  • Instrumentation and prototype developers

Buying Tip

Check that your intended load stays within the 20W output limit and that your input source sits inside the 3.6–30V range before ordering.

Elecvora expert review

Our verdict

A useful dual-rail module for projects that need both positive and negative adjustable voltages from one compact board. The 20W rating and terminal wiring make it practical for bench work and small builds, provided you respect the power limit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Positive and negative outputs adjustable from 3V to 30V
  • Wide 3.6–30V input range
  • Screw terminals allow tool-free installation
  • Small 59 x 32 mm footprint at 32 g

Cons

  • Efficiency drops to 68% at the low end
  • Output must be set manually before connecting a load
  • No enclosure or mounting hardware included

Best for

Bench and DIY projects needing an adjustable split supply

Not ideal for

High-power equipment beyond the 20W rating

Specifications

Item TypeBoost & Buck Converter Module
Output Voltage±3–30V DC adjustable
Max Power Output (W)20W
Conversion efficiency68–89%
Operating Current (mA)2.5 Static
Length (mm)59
Width (mm)32
Weight (g)32
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.033 kg
Shipping Dimensions7 × 4 × 3 cm

What's in the box

  • 1 x DC-DC Boost & Buck Converter Module, ±3–30V Adjustable Output, Input 3.6–30V

Frequently Asked Questions

What input voltage does this module need?
It accepts a DC input between 3.6V and 30V. Stay within that range to avoid damaging the board.
Can it output both positive and negative voltage?
Yes. It provides a positive rail and a negative rail, each adjustable from 3V to 30V.
What is the maximum output power?
The module is rated for a maximum of 20W output. Keep your load within that figure.
Do I need to solder to install it?
No soldering is required for wiring. Connections are made through the screw terminals, which also make replacement easy.
What comes in the package?
The package contains one DC-DC Boost & Buck Converter Module. No other accessories are listed.
How efficient is the module?
Conversion efficiency is quoted at 68–89%, depending on the operating conditions. Some energy is lost as heat, so allow airflow.

Overview

This DC-DC boost and buck converter module takes a DC input between 3.6V and 30V and delivers two independently adjustable rails: a positive output and a negative output, each settable from 3V to 30V. That dual-rail design is what separates it from ordinary single-output regulators, and it makes the module useful wherever a circuit needs a positive and negative supply at the same time.

The board is rated for a maximum of 20W output and measures 59 mm by 32 mm at 32 g, so it fits comfortably into small enclosures and prototype builds. Wiring is done through screw terminals, so no soldering iron is needed to connect or remove the module.

Key Features

  • Dual adjustable outputs: positive and negative rails, each adjustable from 3V to 30V.
  • Wide input range: accepts 3.6–30V DC from a suitable source.
  • 20W maximum output: enough headroom for higher-power loads within the rating.
  • Efficient operation: quoted conversion efficiency of 68–89%.
  • Low standby draw: 2.5 mA static current.
  • Tool-free installation: terminal wiring allows easy replacement.

Specifications Explained

Input and output voltage

The 3.6–30V input range covers many common DC supplies, while the ±3–30V adjustable output lets you match the module to the device you are powering. Set each rail with care, since the output range is wide and a careless adjustment can exceed what a connected circuit expects.

Power and efficiency

Maximum output power is 20W, which is the figure to watch when choosing a load. Efficiency between 68% and 89% means some input energy is lost as heat, so allow airflow around the board during sustained operation.

Size and current

At 59 x 32 mm and 32 g, the module is small enough for crowded builds. Static current of 2.5 mA is the draw when the module is powered but not driving a meaningful load.

Compatibility and Requirements

The module needs a DC input within 3.6–30V and a load that stays within the 20W output limit. It is intended for wiring into equipment through its terminals, so basic familiarity with polarity and voltage adjustment is required. Confirm the polarity and voltage of your load before connecting it.

Typical Uses

  • ADC and DAC amplifier supplies
  • RS232, RS485 and RS422 bus power
  • Low-power audio devices and car audio systems
  • LCD backlight power supplies
  • Instrumentation and general DIY electronics projects

What's in the Box

One DC-DC Boost & Buck Converter Module with ±3–30V adjustable output and 3.6–30V input.

Quick specs

Item Type
Boost & Buck Converter Module
Output Voltage
±3–30V DC adjustable
Max Power Output (W)
20W
Conversion efficiency
68–89%
Operating Current (mA)
2.5 Static
Length (mm)
59
See all specifications