Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This compact DC power adapter plate accepts a 5.5×2.1 mm barrel jack and breaks it out to two VCC and two GND connections. It provides a safe, reliable way to power your DIY projects and prototypes.

Key Highlights

  • Standard 5.5×2.1 mm DC barrel jack input
  • Two VCC and two GND output points for easy distribution
  • Compact 25 × 12 mm PCB fits tight spaces
  • Weighs only 3 g, ideal for lightweight builds
  • Screw terminal blocks for secure, solder-free connections
  • Great for prototyping, DIY electronics and test setups

Ideal For

  • DIY electronics enthusiasts building custom projects
  • Students and educators working on prototyping
  • Makers who need a quick, solder-free power connection
  • RC hobbyists adding auxiliary power to models
  • Anyone using 5.5×2.1 mm power adapters in tight spaces

Buying Tip

Check that your power adapter has a 5.5×2.1 mm plug and confirm the voltage and polarity match your device before connecting.

Elecvora expert review

Our verdict

This tiny breakout board does exactly what it promises: it turns a standard barrel jack into a convenient, screw-terminal power connection. It is a handy, low-cost solution for prototyping and DIY projects where you need to bring power in and distribute it without soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Screw terminals make connections secure and reusable
  • Very compact and lightweight
  • Accepts common 5.5×2.1 mm plugs
  • Dual outputs simplify power distribution

Cons

  • No voltage regulation or polarity protection
  • Requires a separate power adapter (not included)
  • Limited to 5.5×2.1 mm input

Best for

Makers and hobbyists who need a quick, reliable power connection for prototypes and small projects.

Not ideal for

Applications requiring regulated voltage or reverse polarity protection.

Specifications

Power Outputinterface 2 VCC, 2-way GND
Connector Size5.5×2.1 mm
PCB Size ( L x W ) mm25 x 12
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions4 × 4 × 2 cm

What's in the box

  • 1 × DC Power Module DC Power Adapter Plate

Frequently Asked Questions

What type of power adapter does this module accept?
It accepts a DC power adapter with a 5.5×2.1 mm barrel plug. The center pin is typically positive, but always verify your adapter’s polarity.
Can I use this module to power multiple devices?
Yes, it provides two VCC and two GND output terminals, so you can connect two separate loads or distribute power to multiple points.
Do I need to solder to use this module?
No soldering is required for the output connections; simply strip your wires and secure them in the screw terminals. However, you can solder directly to the board if you prefer a permanent connection.
Is the power adapter included?
No, the package includes only the DC Power Module DC Power Adapter Plate. A power adapter must be purchased separately.
Does this module regulate voltage?
No, it does not regulate voltage. The output voltage will be the same as the input voltage from your power adapter.
What are the dimensions of the PCB?
The PCB measures 25 mm by 12 mm and weighs approximately 3 grams.

Overview

The DC Power Module DC Power Adapter Plate is a simple but highly practical breakout board that lets you connect a DC power source to your application quickly and safely. It features a standard 5.5×2.1 mm barrel jack input and provides two VCC and two GND output terminals, making it easy to distribute power to multiple points in your circuit. The board is compact (25 × 12 mm) and lightweight (3 g), so it integrates neatly into enclosures and portable projects. Whether you are a hobbyist, student, or professional, this module offers a reliable way to bring power into your build without soldering directly to a jack or risking loose wires.

Key Features

  • 5.5×2.1 mm DC barrel jack – compatible with a wide range of common power adapters.
  • Dual VCC and dual GND outputs – easily power two separate branches of your circuit.
  • Screw terminal blocks – secure connections without soldering; just strip and insert wires.
  • Compact PCB – 25 × 12 mm footprint saves valuable space.
  • Lightweight design – at only 3 g, it won’t weigh down your project.

Specifications Explained

The 5.5×2.1 mm connector size refers to the outer diameter (5.5 mm) and inner pin diameter (2.1 mm) of the barrel jack. This is one of the most common DC plug sizes, so you can use it with many standard power adapters. The power output interface gives you two VCC (positive) and two GND (negative) terminals, allowing you to wire two separate loads or distribute power more conveniently. The PCB dimensions of 25 × 12 mm mean the board is small enough to fit into tight spaces, while the 3 g weight ensures it won’t affect the balance of lightweight builds.

Compatibility and Requirements

This module requires a DC power adapter with a 5.5×2.1 mm barrel plug (not included). The output terminals accept stripped wires, which can be secured with a small screwdriver. No soldering is required for the output connections, though you may choose to solder wires directly to the board for a permanent installation. The module does not include any voltage regulation or polarity protection, so ensure your power source matches the voltage and polarity required by your application.

Typical Uses

  • Prototyping on breadboards or perfboards
  • DIY electronics projects requiring a reliable power input
  • Test setups where power needs to be distributed to multiple points
  • Educational kits and student projects
  • Small robots and RC models with tight space constraints

What's in the Box

1 × DC Power Module DC Power Adapter Plate.

Quick specs

Power Output
interface 2 VCC, 2-way GND
Connector Size
5.5×2.1 mm
PCB Size ( L x W ) mm
25 x 12
Weight (g)
3
Shipping Weight
0.005 kg
Shipping Dimensions
4 × 4 × 2 cm
See all specifications