
1 / 4 · Click to enlarge
AI Summary
A compact analog UV sensor module that detects 200-370nm ultraviolet light and runs from 3.3V to 5V. Its 0-1V output connects straight to an Arduino or MCU analog pin for quick UV intensity readings.
Key Highlights
- Detects ultraviolet light across the 200-370nm wavelength range
- Wide 3.3V to 5V supply suits most Arduino and MCU boards
- Low 0.06mA current draw for battery-friendly projects
- Analog 0-1V output connects to any MCU analog input
- Fast response time under 0.5 seconds
- Operates from -20C to 85C for indoor and outdoor use
Ideal For
- Arduino and ESP32 makers adding UV sensing
- Students building weather or environmental science projects
- Engineers prototyping flame and UV source detection
- Hobbyists logging solar UV intensity outdoors
- Educators demonstrating UV light concepts in class
Buying Tip
Confirm your board's ADC reference voltage before wiring the OUT pin, since the module outputs 0-1V and a mismatched reference will skew your readings.
Elecvora expert review
Our verdict
A straightforward, low-cost UV sensing module that is easy to wire and read on almost any microcontroller. It suits relative UV measurements and experiments rather than precision instrument work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple three-pin analog interface
- Works on both 3.3V and 5V systems
- Very low current draw
- Fast sub-0.5-second response
- Wide -20C to 85C operating range
Cons
- Output is 0-1V, so ADC reference must match
- No digital output or built-in calibration
- Bare module without wires or headers
Best for
Makers and students needing basic UV intensity sensing
Not ideal for
Applications requiring calibrated, lab-grade UV measurement
Specifications
| Model No. / Name | UV Sensor |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| Operating Current (mA) | 0.06 |
| Output Voltage | DC 0-1V |
| Response wavelength(nM) | 200nm-370nm |
| Response Time (uS) | less than 0.5 seconds |
| Additional Specs. | Detect UV wavelength: 200-370nm |
| Operating Temperature (°C) | -20℃ ~85℃ |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 4 × 1 cm |
What's in the box
- 1 x DC3.3V-5V UV Detection Sensor Module
Frequently Asked Questions
What voltage does this module need?
What kind of output does it provide?
Which wavelengths can it detect?
Does it work with Arduino and other boards?
What is included in the package?
How should I care for the sensor?
Overview
The Generic UV Detection Sensor Module is a small breakout board that senses ultraviolet light in the 200-370nm range and reports intensity as an analog voltage. It is designed for makers and engineers who want to add UV awareness to a microcontroller project without complex calibration hardware. Power it from 3.3V or 5V, read the OUT pin with an analog input, and you have a working UV light detector.
Key Features
- Broad UV response: sensitive from 200nm to 370nm, covering the UV bands most relevant to sunlight and flame monitoring.
- Flexible power: accepts 3.3V to 5V, so it works with common 3.3V and 5V boards.
- Low current: about 0.06mA, easy on small power budgets.
- Analog output: a 0-1V signal that scales with detected UV intensity.
- Fast response: reacts in less than 0.5 seconds.
- Wide temperature range: rated for -20C to 85C environments.
Specifications Explained
Wavelength and sensitivity
The 200-370nm response window means the module reacts to UVC, UVB, and part of UVA. That makes it useful for comparing UV levels rather than measuring a single narrow band with lab precision.
Voltage and current
A 3.3V to 5V input range keeps wiring simple on Arduino, ESP32, Raspberry Pi Pico, and similar boards. The 0.06mA draw means it barely affects your power budget.
Analog output
The OUT pin delivers 0-1V. Most MCUs read this directly through an ADC pin; check your board's ADC reference so you interpret the reading correctly. Higher UV usually means a higher output voltage, but confirm the direction with a quick test.
Response and temperature
Under 0.5 seconds response is fast enough for live readings and simple logging. The -20C to 85C range covers typical indoor and sheltered outdoor use.
Compatibility and Requirements
The module needs a 3.3V or 5V DC supply, a ground connection, and an analog input on your microcontroller. It ships as a bare module, so you supply your own jumper wires or header pins and your own MCU board. No library is required to read the analog pin.
Typical Uses
- Solar UV intensity monitoring in weather stations
- Flame and UV source detection experiments
- Science fair and classroom demonstrations
- UV index comparison projects
- Environmental data logging with an MCU
What's in the Box
One DC3.3V-5V UV Detection Sensor Module. Wires and controller board are not included.

Quick specs
- Model No. / Name
- UV Sensor
- Operating Voltage (V)
- 3.3 to 5
- Operating Current (mA)
- 0.06
- Output Voltage
- DC 0-1V
- Response wavelength(nM)
- 200nm-370nm
- Response Time (uS)
- less than 0.5 seconds












