Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Digilent, this audio amplifier module is a good fit for makers, students and electronics hobbyists. Main specs: input voltage (vdc) ±2 V.; audio input/output port 3.5 mm; sample rate Up to 100 kS/s (samples per second).. Check that your power source supplies ±2 V. before connecting it.

Key Highlights

  • Input Voltage (VDC): ±2 V.
  • Audio input/output Port: 3.5 mm
  • Sample Rate: Up to 100 kS/s (samples per second).

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Input Voltage (VDC)±2 V.
Audio input/output Port3.5 mm
Impedance (Ω)10 kΩ.
Frequency Response20 Hz to 20 kHz
Sample RateUp to 100 kS/s (samples per second).
Shipping Weight0.05 kg
Shipping Dimensions12 × 11 × 4 cm

Overview

The Digilent Analog Discovery Audio Adapter+ (410-418) for Analog Discovery 3 - 3.5mm Stereo/Mono Audio Capture & Analysis Module | WaveForms Compatible, made by Digilent, is listed in our audio amplifier module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Input Voltage (VDC): ±2 V. (match this to your power supply; too high a voltage can damage the part)
  • Audio input/output Port: 3.5 mm (confirm your cable or board uses the same connector)
  • Impedance (Ω): 10 kΩ.
  • Frequency Response: 20 Hz to 20 kHz (make sure the rest of your system works at this frequency)
  • Sample Rate: Up to 100 kS/s (samples per second). (your supply must deliver at least this much current)
  • Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 12 × 11 × 4 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Audio Adapter+ is a module that allows the Analog Discovery 3 to capture and analyze audio signals from external sources and easily connect audio signals generated by the device to audio devices like headphones and speakers. It is capable of both Mono and Stereo audio, with both types of connectors connected to both the Wavegen and Scope instruments. The Audio Adapter+ is equipped with 2x15 MTE connectors, which makes it compatible with the Analog Discovery 3 and backwards compatible with previous devices in the Discovery family. An additional 2x15 MTE connector is loaded as a pass through for the digital signals, power supplies, and others, so that these other instruments can be used simultaneously to support complex applications.


Features:

  1. Provides audio connectivity via 3.5 mm jacks for both Scope and Wavegen
  2. Inputs and outputs can independently use 2 mono jacks or 1 stereo jack, selected via jumpers
  3. Active circuitry powered by the Analog Discovery 3 power supplies
  4. Pass-through connector for all other Analog Discovery 3 signals, including Digital I/O, Triggers, and Power Supplies
  5. Compatible with the Analog Discovery 3

Package Includes:

1 x Digilent Analog Discovery Audio Adapter+ (410-418) for Analog Discovery 3 - 3.5mm Stereo/Mono Audio Capture & Analysis Module | WaveForms Compatible

Quick specs

Input Voltage (VDC)
±2 V.
Audio input/output Port
3.5 mm
Impedance (Ω)
10 kΩ.
Frequency Response
20 Hz to 20 kHz
Sample Rate
Up to 100 kS/s (samples per second).
Shipping Weight
0.05 kg
See all specifications