Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This sound sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: speaker (y/n) Supports 0.25W-2W; length (mm) 22.2; width (mm) 16.2. Check that your power source supplies 3 to 4.5 before connecting it.

Key Highlights

  • Speaker (Y/N): Supports 0.25W-2W
  • Length (mm): 22.2
  • Width (mm): 16.2

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (VDC)3 to 4.5
Speaker (Y/N)Supports 0.25W-2W
Length (mm)22.2
Width (mm)16.2
Impedance (Ω)8
Shipping Weight0.01 kg
Shipping Dimensions4 × 4 × 1 cm

Overview

The Dog Barking Sound Trigger Voice Module is listed in our sound sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (VDC): 3 to 4.5 (match this to your power supply; too high a voltage can damage the part)
  • Speaker (Y/N): Supports 0.25W-2W (confirm your cable or board uses the same connector)
  • Length (mm): 22.2 (measure your mounting space before ordering)
  • Width (mm): 16.2 (measure your mounting space before ordering)
  • Impedance (Ω): 8
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 4 × 4 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

A useful as well as single module to produce dog barking musical sound that can be easily interfaced with speakers and a simple power supply without the need for additional amplifier units. The module has a non-removable chip and easy-to-connect PCB leads for trouble-free soldering solutions. It can be powered using simple 3-4.5V DC which is suitable for usage of 2 pcs 1.5V batteries if used as indoor bell systems. The output specification requires 0.25W to 2W speakers with 8 Ohms impedance. The inbuilt button or trigger offers one-time play if shorted.


Features:

  1. Good Quality Output
  2. No additional amplifier is required
  3. Small size PCB to be fitted in very small space during DIY
  4. Solder-able pads available in the module

Package Includes:

1 x Dog Barking Animal Music Chip Sound Trigger Voice Module for DIY

Quick specs

Operating Voltage (VDC)
3 to 4.5
Speaker (Y/N)
Supports 0.25W-2W
Length (mm)
22.2
Width (mm)
16.2
Impedance (Ω)
8
Shipping Weight
0.01 kg
See all specifications