
1 / 2 · Click to enlarge
At a glance
This digital display potentiometers is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; resistance (ohm) 10K; interface type I2C. Check that your power source supplies 2.5V to 5.5V before connecting it.
Key Highlights
- Manufacturer: Generic
- Resistance (Ohm): 10K
- Interface Type: I2C
Ideal For
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Manufacturer | Generic |
|---|---|
| Resistance (Ohm) | 10K |
| Interface Type | I2C |
| Tolerance (%) | 20 |
| Temperature Coefficient | ±4ppm/°C |
| Digital Input Voltage(V) | 2.5V to 5.5V |
| Additional Specs. | Analog Operating Voltage: 4.5V to 15.5V |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The DS3502U Digital Potentiometer 10kΩ is listed in our digital display potentiometers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: Generic
- Resistance (Ohm): 10K
- Interface Type: I2C (confirm your cable or board uses the same connector)
- Tolerance (%): 20
- Temperature Coefficient: ±4ppm/°C
- Digital Input Voltage(V): 2.5V to 5.5V (match this to your power supply; too high a voltage can damage the part)
- Additional Specs.: Analog Operating Voltage: 4.5V to 15.5V (match this to your power supply; too high a voltage can damage the part)
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a DS3502U Digital Potentiometer 10kΩ 128-Position Linear I2C 10 Pin, μSOP IC. A DS3502 is a 7-bit, nonvolatile (NV) digital potentiometer featuring an output voltage range of up to 15.5V. Programming is accomplished by an I2C-compatible interface, which can operate at speeds of up to 400kHz. External voltages are applied at the RL and RH inputs to define the lowest and highest potentiometer outputs.
Features:
- 128 Wiper Tap Points
- I2C-Compatible Serial Interface
- Address Pins Allow Up to Four DS3502s to Share the Same I²C Bus
- 10-Pin μSOP Package
Package Includes:
1 x DS3502U Digital Potentiometer 10kΩ.
Quick specs
- Manufacturer
- Generic
- Resistance (Ohm)
- 10K
- Interface Type
- I2C
- Tolerance (%)
- 20
- Temperature Coefficient
- ±4ppm/°C
- Digital Input Voltage(V)
- 2.5V to 5.5V













